PARAMETER UNITS TURNS RATIO HDSL Line Interface Transformer 1 : 2.12 +1% Pins 10-6 : 2-5 short pins 8-7 : 4-1 Inductance 1 2.25 + 5% mH 40 max. µH Leakage Inductance 2 DCR Pins 2 - 4 1.8 +15% Ω DCR Pins 1 - 5 1.8 +15% Ω DCR Pins 10 - 8 0.42 +15% Ω DCR Pins 7 - 6 Ω 0.64 +15% Isolation 2000 Schematic Diagram DC Current 60 Max. mA Long. Balance 2.5 to 300kHz 55 Min. dB 2 8 4 7 1 6 5 Pri. VRMS (Primary to Secondary) 10 Sec. 2.5 to 300kHz 1) Tested Pins 2-5 @ 10 kHz and 0.1 V (Short Pins 4-1) 2) Tested Pins 2-5@ 10 kHz 0.1 V (Short Pins 4-1 short 10-8, 7-6) Tested on a Wayne Kerr 3245 Physical Dimensions inches (mm) .550 (13.97) MAX. .536 (13.61) MAX. PIN POSITION GRID 0.100 (2.54) HOLES FOR BOBBIN PINS .525 (13.34) MAX. .210 (5.33) TYP. .100 (2.54) TYP. 10 9 8 7 .400 (10.16) TYP. Pin Diameter is 0.025 (0.64) 6 Bottom View Rhombus P/N: 1 2 3 4 5 Cust. P/N: Date: 2/28/96 Rhombus Industries Inc. Transformers & Magnetic Products www.rhombus-ind.com T-1225 Name: Sheet: 1 of 1 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 FAX: (714) 896-0971