Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 768772331 WE-TI High Voltage WE-TI High Voltage DATUM / DATE : 2010-08-12 A Mechanische Abmessungen / dimensions: B C A B C D E F E A 7,8 ± 0,5 9,5 ± 0,5 5,0 ± 1,0 3,0 max. 5,0 ± 0,5 ø 0,7 ref mm mm mm mm mm mm F D @@FRM 1 @@ B Elektrische Eigenschaften / electrical properties: Eigenschaften / properties Leerlauf-Induktivität / inductance DC-Widerstand / DC-resistance Nennstrom / nominal current Sättigungsstrom/ saturating current Testbedingungen / test conditions C Lötpad / soldering spec.: Wert / value Einheit / unit tol. 100 kHz / 0,25V LO 330 µH ±10% @ 20° C RDC max. 0,70 Ω max. ΔT= 40°C IN 0,70 A max. |ΔL/Lo|-10% Isat 0,95 A typ. D Prüfgeräte / test equipment: E Testbedingungen / test conditions: Wayne Kerr 3260B für/for L0 Luftfeuchtigkeit / humidity: 33% Dostmann T905 Thermometer für/for IDC Umgebungstemperatur / temperature: +20°C Baker DWX-05-PD für/for Surge/Impuls test 400VDC spannungsfest gemäß WESTD1516 F Werkstoffe & Zulassungen / material & approvals: G Eigenschaften / general specifications: Basismaterial / base material: Ferrit/ferrite Betriebstemp. / operating temperature: Draht / wire: Class H Umgebungstemp. / ambient temperature: -40°C - + 85°C -40°C - + 125°C It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. Freigabe erteilt / general release: ............................................................................... Datum / date Kunde / customer .................................................................................. Unterschrift / signature Würth Elektronik ............................................................................... ...................................... MST Geprüft / checked Kontrolliert / approved Name Version 1 10-08-12 Änderung / modification Datum / date This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 1