5-V Voltage Regulator TLE 4285 G Features • • • • • • • • • • 15 mA current capability Low quiescent current consumption Power fail output Wide operation range: up to 45 V Wide temperature range: -40 °C to 150 °C Output protected against short circuit Overtemperature protection Very small SMD-Package PG-SCT-595-5 Green product (RohS compliant) AEC qualified PG-SCT-595-5 Functional Description The TLE 4285 G is a 5-V fixed voltage regulator in a very small SMD package PG-SCT-595-5. The maximum input voltage is 45 V. The output is able to drive an output current of more than 10 mA while it regulates the output voltage within a 4% accuracy. The Power Fail Output (open collector) is switched to low in case of under-voltage at the output pin. To reduce external components the Power Fail Output has an internal pull-up resistor of 50 kΩ which is connected to the output Q. The device incorporates a temperature protection that disables the circuit at overtemperature. Type Package Marking TLE 4285 G PG-SCT-595-5 B1 Data Sheet 1 Rev. 2.2, 2008-04-21 TLE 4285 G PG-SCT-595-5 PF 1 GND 2 Ι 3 5 GND 4 Q AEP02279 Figure 1 Pin Configuration (top view) Table 1 Pin Definitions and Functions Pin No. Symbol Function 1 PF Power Fail; L for under-voltage; internally connected to Q via 50 kΩ pull-up resistor 2 GND Ground; internally connected to pin 5 3 I Input voltage 4 Q Output voltage; must be blocked by a capacitor CQ ≥ 1 µF, ESR ≤ 10 Ω to GND 5 Data Sheet GND Ground; internally connected to pin 2 2 Rev. 2.2, 2008-04-21 TLE 4285 G Functional Block Diagram Protection Ι 3 4 Reference Q Regulator 1 Power Fail Control PF 2, 5 GND Figure 2 Data Sheet AEB02186 Block Diagram 3 Rev. 2.2, 2008-04-21 TLE 4285 G Table 2 Absolute Maximum Ratings -40 °C < Tj < 150 °C Parameter Symbol Limit Values Unit Remarks Min. Max. VI II -0.3 45 V – -20 * mA * internally limited VQ IQ -0.3 16 V – -20 * mA * internally limited VPF IPF -0.3 45 V – -500 * µA * internally limited Tj Tstg -40 150 °C – -50 150 °C – Rthj-pin Rthj-a – 30 K/W measured to pin 5 – 55 K/W 1) Input Voltage Current Output Voltage Current Power Fail Voltage Current Temperatures Junction temperature Storage temperature Thermal Resistances Junction pin Junction ambient 1) Package mounted on PCB 40 × 40 × 1.5 mm3/6 cm2 Cu. Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage to the integrated circuit. Table 3 Operating Range Parameter Input voltage Output current Junction temperature Data Sheet Symbol VI IQ Tj Limit Values Unit Remarks Min. Max. 6 42 V – 15 – mA – -40 150 °C – 4 Rev. 2.2, 2008-04-21 TLE 4285 G Table 4 Electrical Characteristics 6.2 V < VI < 36 V; -40 °C < Tj < 150 °C; unless otherwise specified Parameter Symbol Limit Values Min. Typ. Max. Unit Test Condition Output Tj = 25 °C; 1 mA < IQ < 10 mA 1 mA < IQ < 10 mA IQ = 10 mA1) Output voltage VQ 4.85 5.0 5.15 V Output voltage 4.8 5.0 5.20 V 0.6 0.8 1.1 V Output capacitor VQ Vdr CQ 1 – – µF ESR ≤ 10 Ω at 10 kHz Output current IQ 15 – 70 mA – Iq – 100 150 µA IQ < 10 mA; VI = 13.5 V Drop voltage Current Consumption Quiescent current Regulator Performance Load regulation ∆VQ – 5 10 mV 0 mA < IQ <10 mA; VI = 6 V; Tj ≤ 85 °C Line regulation ∆VQ – 5 10 mV Power supply ripple rejection PSRR – 60 – dB IQ = 5 mA; Tj ≤ 85 °C fr = 100 Hz; Vr = 0.5 Vpp Power fail switching threshold ∆VQ – VQ,nom – mV VPF < 1 V Power fail low voltage VPF, low – 0.15 0.3 V Power fail leakage current IPFLK – – 10 µA IPF = 0.1 mA; VQ = 4.5 V Rext = 47 kΩ Power fail pull-up RPF 30 50 70 kΩ Power Fail Output - 50 internally connected to VQ 1) Measured when the output voltage VQ has dropped 100 mV from the nominal value. Data Sheet 5 Rev. 2.2, 2008-04-21 TLE 4285 G Ι 6...40 V 3 4 Q 5V PF Power Fail TLE 4285G CΙ 100 nF 1 2, 5 GND CQ 1 µF AES02187 Figure 3 Data Sheet Application Circuit 6 Rev. 2.2, 2008-04-21 TLE 4285 G Typical Performance Characteristics Output Voltage VQ versus Temperature Tj AED02191 5.10 VQ Output Voltage VQ versus Output Current IQ AED02192 6 V VQ 5.05 V T j = 130 C 5 Ι Q = 5 mA 5.00 4 4.95 3 4.90 2 4.85 1 4.80 -40 Data Sheet 25 C -40 C 0 40 80 0 120 C 160 Tj 7 0 10 20 30 mA 40 ΙQ Rev. 2.2, 2008-04-21 TLE 4285 G Output Voltage VQ versus Input Voltage VI Drop Voltage Vdr versus Output Current IQ AED02748 6 VQ AED02193 1200 V V dr 5 mV Tj = 1000 T j = 25 ˚C -40 ˚C 4 800 3 600 2 400 1 200 25 ˚C 130 ˚C 0 0 0 1 3 2 4 5 V 6 VI 0 2.5 5 7.5 10 mA ΙQ 15 Current Consumption Iq versus Output Current IQ AED02750 120 Iq µA 100 80 VI = 13.5 V T j = 25 ˚C 60 40 20 0 0 5 10 15 20 mA 25 IQ Data Sheet 8 Rev. 2.2, 2008-04-21 TLE 4285 G Current Consumption Iq versus Input Voltage VI Power Fail Low Voltage VPF versus Power Fail Current IPF AED02749 600 Iq µA V PF 500 mV 250 200 400 T j = 25 ˚C I Q= 2 mA 150 200 100 100 50 0 10 20 30 V 0 50 40 -40 ˚C 100 150 200 250 µA 300 Ι PF VI Data Sheet Tj = 150 ˚C 25 ˚C 300 0 AED02188 300 9 Rev. 2.2, 2008-04-21 TLE 4285 G Package Outlines 2.9 ±0.2 (2.2) B (1.45) 1.2 +0.1 -0.05 1.1 MAX. (0.3) (0.4) 1) 2 3 0.3 +0.1 -0.05 0.15 +0.1 -0.06 +0.1 0.6 -0.05 0.2 0.95 M 1.6 ±0.1 10˚ MAX. 1 4 2.5 ±0.1 (0.23) 1) (0.13) 5 0.25 ±0.1 10˚ MAX. 0.1 MAX. A A 1.9 1) Contour of slot depends on profile of gull-wing lead form 0.25 M B GPW05997 Figure 4 Outline PG-SCT-595-5 Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). You can find all of our packages, sorts of packing and others in our Infineon Internet Page “Products”: http://www.infineon.com/packages. Dimensions in mm SMD = Surface Mounted Device Data Sheet 10 Rev. 2.2, 2008-04-21 TLE 4285 G Revision History Version Date Rev. 2.2 2008-04-21 Initial version of RoHS-compliant derivate of TLE 4285 G Page 1: AEC certified statement added. Page 1 and Page 10: RoHS compliance statement and Green product feature added. Page 1 and Page 10: Package changed to RoHS compliant version. Page 1: Marking information added. Page 1: Adapted description to values given on Page 5. Not a change of electrical characteristics. Legal Disclaimer updated. Rev. 2.1 2004-01-01 Final datasheet Data Sheet Changes 11 Rev. 2.2, 2008-04-21 Edition 2008-04-21 Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.