Power PCB Relay RP II/2 2 pole 8 A Features • • • • • 2 C/O or 2 N/O contacts 4 kV / 8 mm coil-contact Twin contacts available PCB-sockets Versions with Ag, or AgNi 0.15 contact material: RoHS compliant (Directive 2002 / 95 / EC) as per product date code 0404 Applications Domestic appliances, UPS's VZ H Technical data of approved types on request F0150-B Contact data Configuration Type of contact Rated current Rated voltage / max.breaking voltage AC Maximum breaking capacity AC Make current (max. 4 s at duty cycle 10%) Contact material Contact Type RP440 RP421 RP421 RP421 RP421 RP420 2 C/O contact or 2 N/O contact single contact 8 A (UL: 10 A) 250 Vac / 440 Vac 2000 VA 14 A AgNi 0.15, AgCdO ratings Load 64 A ON, 2 A OFF, 250 Vac 2 A, 50 Vdc, resistive 1/10hp, 240 Vac, per contact 3 A, 380 Vac, AC11 0.18 A, 110 Vdc, DC11 0.6 A, 220 Vac, cosϕ=0.8, single phase motor Operations 1x104 approx. 2x106 Standard VDE 0860 UL 508 approx. 3x104 VDE 0660 approx. 1x105 VDE 0660 approx. 1.3x106 Coil data 5...110 Vdc 500 mW 2/b Coil versions, DC-coil Coil Nominal Pull-in Release Maximum Coil code voltage voltage voltage voltage resistance Vdc Vdc Vdc Vdc c 005 5 3.5 0.5 9.0 54+10% 006 6 4.2 0.6 10.8 68+10% 012 12 8.4 1.2 21.6 270+10% 024 24 16.8 2.4 43.2 1100+15% 048 48 33.6 4.8 86.4 4400+15% 060 60 42.0 6.0 108.0 6540+15% 110 110 77.0 11.0 198.0 23100+15% All figures are given for coil without preenergization, at ambient temperature +20°C Other coil voltages on request Insulation Dielectric strength Clearance / creepage coil-contacts open contact circuit adjacent contacts 4000 Vrms 1000 Vrms 2500 Vrms 8 / 8 mm Coil current mA 92.6 88.2 44.4 21.8 10.9 9.2 4.8 Rights to change data / design reserved Edition: 07/2004 Nominal voltage Nominal coil power Operate category Power PCB Relay RP II/2 2 pole 8 A Insulation Insulation to IEC 60664 Voltage rating Pollution degree Overvoltage category Insulation to VDE 0110b (2/79) Insulation category / reference voltage PCB layout / terminal assignment 250 V 3 III Bottom view on solder pins Dimensions in mm C / 250 Other data RoHS - Directive 2002 / 95 / EC versions with Ag, or AgNi 0.15 contacts: scompliant as per product date code 0404 Ambient temperature -40...+70 °C Mechanical life 20x106 operations Max. switching rate at rated- / minimum load 10 min-1 / 1200 min-1 Operate- / release time typ. 9 / 3 ms Bounce time N/O contact/N/C contact typ. 2 / 3 ms Vibration resistance N/O / N/C contact 11 / 1.5 g, 30...150 Hz Shock resistance (destruction) 100 g Category of protection (IEC 61810) RT II - flux proof, RT III - wash tight Relay weight 18 g Packaging unit 20 / 500 pcs. Accessories see Dimensions S0163-CO 2 C/O contacts S0163-BJ 2 N/O contacts Dimensions in mm S0273-AB Rights to change data / design reserved Edition: 07/2004 S0163-BK