ETC MKS02

Metallized polyester capacitors
in PCM 2.5 mm
Ideally suited for decoupling up to high-frequency ranges.
volume/capacitance ratio.
Very advantageous
Wide capacitance range with smallest box sizes.
mm technology with low self-inductance for low damping applications.
and reeled.
PCM 2.5
Available taped
Maximum pulse rise time:
Technical Data
Dielectric: Polyethylene terephthalate film.
Capacitor electrodes: Vacuum-deposited aluminium.
Encapsulation: Flame retardent plastic case,
UL 94 V-0, with epoxy resin seal.
Colour: Red. Marking: White.
Temperature range: -55° C to +100° C.
Test specifications: In accordance with
IEC 60384-2 and EN 130400 (u. prep.).
Test category: 55/100/21 in accordance with IEC.
Insulation resistance at +20° C:
Ur
Utest
C <= 0.33 µF
0.33µF<C<=1.5µF
16 VDC
10 V
>= 3.75 x 103 MOhms
Mean value:1x104 MOhms
>= 1250 sec
(MOhms x µF)
Mean value:
3000 sec
50 VDC
10 V
>= 3.75 x 103 MOhms
Mean value:1x104 MOhms
>= 1250 sec
(MOhms x µF)
Mean value:
3000 sec
63 VDC
50 V
>= 1 x 104 MOhms
Mean value:2x104 MOhms
-
100VDC 100V
>= 1.5 x 104 MOhms
Mean value:3x104 MOhms
-
Pulse rise time V/µsec
Capacitance
pF/µF
max. operation
test
1000...2200
3300...6800
0.01...0.022
0.033...0.068
0.1...0.33
0.47 ...1.0
1.5
175
100
50
30
20
15
12
1750
1000
500
300
200
150
120
for pulses equal to the rated voltage.
Vibration: 6 hours at 10...2000 Hz and 0.75 mm
displacement amplitude or 10 g in accordance
with IEC 60068-2-6.
Low air density: 1 kPa = 10 mbar in accordance
with IEC 60068-2-13.
Bump test: 4000 bumps at 390 m/sec2 in accordance with
IEC 60068-2-29.
Voltage derating: A voltage derating factor of 1.25% per K
must be applied from +85° C for DC voltages and from +75°
C for AC voltages.
Impedance change with frequency
(general guide)
In accordance with IEC 60384-2 and
EN 130400 (u. prep.).
Measuring time: 1 min.
Capacitance tolerances: +/-20%, +/-10%,
(+/-5% available subject to special enquiry).
Test voltage: 1.6 Vr, 2 sec.
Dissipation factors at +20° C: tan delta
at f
C <= 0.1 µF
0.1 µF < C <= 1.5 µF
1 kHz
10 kHz
100 kHz
<= 8 x 10-3
<= 8 x 10-3
<=15 x 10-3
-
<= 15 x 10-3
<= 25 x 10-3
16 VDC/
10 VAC*
50 VDC/
30 VAC*
63 VDC/
40 VAC*
W
H
H
L PCM** W
H
1000pF
1500 "
2200 "
3300 "
4700 "
6800 "
2.5
2.5
2.5
2.5
2.5
2.5
5.5
5.5
5.5
5.5
5.5
5.5
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
7
7
7
7
7
7
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
0.01µF
0.015 "
0.022 "
0.033 "
0.047 "
0.068 "
2.5
2.5
2.5
2.5
2.5
2.5
5.5
5.5
5.5
5.5
5.5
5.5
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
7
7
7
7
7
7.5
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
0.1 µF
0.15 "
0.22 "
0.33 "
0.47 "
0.68 "
2.5
3
3
3.8
4.6
4.6
5.5
7.5
7.5
8.5
9
9
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
3 7.5 4.6
2.5
1.0 µF 5.5 10 4.6
1.5 " 5.5 10 4.6
2.5
2.5
Capacitance
L PCM** W
3
3
3.8
4.6
4.6
7.5
7.5
8.5
9
9
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
5.5 10 4.6
2.5
100 VDC/
63 VAC*
L PCM** W .H. L PCM**
2.5
2.5
2.5
2.5
2.5
2.5
7
7
7
7
7
7
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
* AC voltage: f = 50 Hz;
1.4 x Urms + UDC <= Ur
**PCM = Printed circuit module
= lead spacing.
Dims. in mm
d = 0.4
Ø
Rights reserved to amend design data
without prior notification.