MEDER BE05-2A31-P

Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
8805231100
Item:
BE05-2A31-P
Coil Data at 20 °C
Conditions
Min
Typ
Max
Unit
Conditions
Min
Typ
Max
Unit
Coil resistance
Coil voltage
Rated power
Pull-In voltage
Drop-Out voltage
Contact data 31
Contact-form
Contact-material
Switching suitability
Contact rating
Switching voltage
Switching current
Carry current
Contact resistance static
Insulation resistance
Breakdown voltage
Operate time incl. bounce
Release Time
Capacity
Special Product Data
Insulation resistance Coil/Contact
Dielectric Strength Coil/Contact
Housing material
Sealing compound
Connection pins
Environmental data
Shock
Vibration
Operating temperature
A
Hg
bounce free
independent on position
up to 500V max. 50W, with 1000V max. 5W
DC or Peak AC
DC or Peak AC
DC or Peak AC
!"
Start Value
# $ % ! %
RH <45 %, 100 V test voltage
according to IEC 255-5
measured with 40% overdrive
measured with no coil excitation
@ 10 kHz across open switch
'
'(
&
'
'
)*
Conditions
Min
RH <45%, 200 VDC test voltage
according to IEC 255-5
Typ
Max
'(
Unit
&
+
Polycarbonat
Polyurethan
Copper alloy tin plated
Conditions
Min
Typ
1/2 sine wave duration 11ms
from 10 - 2000 Hz
Max
Unit
,
,
-
.
Modifications in the sense of technical progress are reserved
Designed at:
Last Change at:
05.10.09
Designed by:
Last Change by:
MPOTUZAK
Approval at:
Approval at:
05.10.09
Approval by:
Approval by:
DSTASTNY
Version:
01
Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
8805231100
Item:
BE05-2A31-P
Environmental data
Storage temperature
Soldering temperature
Washability
Conditions
Min
Typ
.
wave sodering max. 5 sec.
Max
Unit
-
fully sealed
Modifications in the sense of technical progress are reserved
Designed at:
Last Change at:
05.10.09
Designed by:
Last Change by:
MPOTUZAK
Approval at:
Approval at:
05.10.09
Approval by:
Approval by:
DSTASTNY
Version:
01