Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3112271220 Item: NP12-2A66-1500-220 NP12-2A71-1500-220 Coil Data at 20 °C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 66 Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage ( < 20 AT ) Operate time incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Dielectric Strength Coil/Contact Housing material Sealing compound Connection pins Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability A not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !"# $ % Start Value & ' #$# ' RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( ) Conditions Min Typ ! ! *+ Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit ( , Metal Voltatex CE 12 FW-UL Copper alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz / / wave sodering max. 5 sec. ) Unit . . . fully sealed Modifications in the sense of technical progress are reserved Designed at: Last Change at: 21.09.09 Designed by: Last Change by: MPOTUZAK Approval at: Approval at: 19.10.09 Approval by: Approval by: DSTASTNY Version: 02