DR65-0109 Single Driver for GaAs FET Switches and Attenuators SO-8 Features n n n n n n V 1.00 High Speed CMOS Technology Complementary Outputs Positive Voltage Control Low Power Dissipation Plastic SOIC Package for SMT Applications Tape and Reel Packaging Available Description M/A-COM's DR65-0109 is a Single channel driver used to translate TTL control inputs into complementary gate voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. Package outline conforms to JEDEC standard MS-012AA Guaranteed Operating Ranges Symbol Parameter1 Unit Min Typical Max VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -5.5 -5.0 -4.5 VCC-VEE Positive to Negative Supply Range V 9.0 10.0 11.0 TA Operating Ambient Temperature °C -40 +25 +85 IOH DC Output Current - HIGH mA — — -1.0 IOL DC Output Current - LOW mA — — 1.0 Trise, Tfall Maximum Input Rise or Fall Time nS — — 500 1. All voltages are relative to GND Absolute Maximum Ratings Truth Table Parameter Absolute Maximum Input VCC - .5V to + 6.0 V VIN A B VEE - 6.0 V to - .5 V 0 VEE GND VCC - VEE 12 V V IN 2 VCC + .5 V 1 GND VEE V OUT VEE - .5 V Storage Temperature -65°C to +150°C 2. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Outputs Single Driver for GaAs FET Switches and Attenuators DR65-0109 V 1.00 Pin Configuration Logic Diagram Output A VIN Output B PIN Function 1 VCC 2 VIN 3 GND 4 GND 5 GND 6 Output A 7 Output B 8 VEE AC & DC Characteristics Over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min Typ Max VIH Input HIGH Voltage Guaranteed HIGH Input Voltage V 2.0 — - VIL Input LOW Voltage Guaranteed LOW Input Voltage V - — 0.8 VOH Output HIGH Voltage IOH = -1 mA VEE = Max V - 0.1 — - VOL Output LOW Voltage IOL = 1 mA VEE = Max V — — VEE + 0.1 IIN Input Leakage Current VIN = VCC or GND VEE = Min µA -1.0 0 1.0 ICC Quiescent Supply Current VCC = Max VEE = Min VIN = VCC or GND µA — — 400 TPHL, TPLH Propagation Delay Guaranteed -40° C to + 85° C nS — — 50 TTHL, TTLH Output Transition Time Guaranteed -40° C to + 85° C nS — — 25 Delay Skew, Output A to Output B Guaranteed -40° C to + 85° C nS — — 8 See Switching Wave Forms for the definition of the switching terms. Supplies must be by-passed with .01 µF Capacitors. Ordering Information Switching Waveforms INPUT VIN TF TR LOGIC 1 90% 1.3 V 10% Part Number Package DR65-0109 Bulk Packaging DR65-0109TR Tape & Reel (1,000 pieces per 7” reel) LOGIC 0 TPLH TPHL OUTPUT A GND 90% VOUT 50% OUTPUT B 10% TTLH VEE TTHL Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2