Quad Driver for GaAs FET Switches and Attenuators DR65-0001 V 6.00 Features n n n n n n SO-16 High Speed CMOS Technology Complementary Outputs Positive Voltage Control Low Power Dissipation Plastic SOIC Package for SMT Applications Tape and Reel Packaging Available Description M/A-COM's DR65-0001 is a Quad channel driver used to translate TTL control inputs into gate voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. Logic Diagram Ax Cx Bx Package outline conforms to JEDEC standard MS-012AC Guaranteed Operating Ranges Symbol Parameter1 Unit Min Typical Max VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -5.5 -5.0 -4.5 TA Operating Ambient Temperature °C -40 +25 +85 IOH DC Output Current - HIGH mA — — -1.0 IOL DC Output Current - LOW mA — — 1.0 Trise, Tfall Maximum Input Rise or Fall Time nS — — 500 1. All voltages are relative to GND. Quad Driver for GaAs FET Switches and Attenuators DR65-0001 V 6.00 Absolute Maximum Ratings Pin Configuration Parameter Absolute Maximum PIN Function VCC - .5V to + 6.0 V 1 VEE - 6.0 V to - .5 V 2 12 V 3 VCC - VEE V IN 2 VCC + .5 V PIN Function A3 9 C2 B3 10 C1 A4 11 GND 4 B4 12 GND 5 VEE 13 A1 V OUT VEE - .5 V 6 VCC 14 B1 Storage Temperature -65°C to +150°C 7 C4 15 A2 Operating Temperature -40°C to +85°C 8 C3 16 B2 2. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. AC & DC Characteristics Over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min Typ VIH Input HIGH Voltage Guaranteed HIGH Input Voltage V 2.0 — Max - VIL Input LOW Voltage Guaranteed LOW Input Voltage V - — 0.8 VOH Output HIGH Voltage IOH = -1 mA VEE = Max V - 0.1 — - VOL Output LOW Voltage IOL = 1 mA VEE = Max V — — VEE + 0.1 IIN Input Current VIN = VCC or GND VEE = Min µA -10 0 10 ICC Quiescent Supply Current VCC = Max VEE = Min VIN = VCC or GND µA — — 400 ∆ICC Additional Supply Current, per TTL Input pin VCC = Max VIN = VCC - 2.1V mA — — 1.0 TPHL, TPLH Propagation Delay Guaranteed -40° C to + 85° C nS — — 50 TTHL, TTLH Output Transition Time Guaranteed -40° C to + 85° C nS — — 25 Delay Skew, Output A to Output B Guaranteed -40° C to + 85° C nS — — 8 Truth Table Switching Waveforms Input INPUT C VIN TF Outputs TR LOGIC 1 90% 1.3 V 10% CX AX BX 0 VEE GND 1 GND VEE LOGIC 0 TPLH TPHL OUTPUT A GND 90% Ordering Information VOUT 50% OUTPUT B 10% TTLH VEE TTHL Part Number Package DR65-0001 Bulk Packaging DR65-0001TR Tape & Reel (1K Reel) Notes: See Switching Wave Forms for the definition of the switching terms. Supplies must be by-passed with .01 µF Capacitors. Unused inputs must be tied to Ground Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2