General Purpose Relays Power PCB Relay RTH 105°C 16A I 1 pole 16 A, 1 CO or 1 NO contact I High-temperature version I Sensitive coil 400 mW I 5 kV / 10 mm coil-contact I Reinforced insulation I WG version: Product in accordance to IEC60335-1 I Ambient temperature 105°C at rated load I RoHS compliant (Directive 2002/95/EC) as per product date code 0413 F0220-C Applications Oven control, cooking plate control Approvals V REG.-Nr. 6106, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Limiting continuous current NO/NC contact Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% Contact material Mechanical endurance Rated frequency of operation with / without load Contact Type RTH14 RTH14 RTH14 RTHH4 RTHH4 RTHH4 1 CO or 1 NO single contact micro disconnection 16 A 1) 240/400 VAC 16 / 25 A 4000 VA 30 A AgNi 90/10 > 10 x 106 cycles 6 / 1200 min-1 ratings Load 10 A, 250 VAC, NO contact. 105°C, EN61810-1 16 A, 250 VAC, NO contact, 105°C, UL508 16 A, 250 VAC, CO contact, 105°C, EN61810-1 10 A, 250 VAC, 105°C 16/8 A, 250 VAC, 105°C 15 A, 250 VAC, 105°C, 10% DF, 7.5 min-1, UL508 Cycles 1,5x105 3x104 1x104 typ 3x105 typ 2,5x105 1x105 Coil data Rated coil voltage range DC coil Coil power Operative voltage range, % of rated coil voltage Coil insulation system according UL1446 5...60 VDC typ 400 mW 1) 90 - 110 % class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW 009 9 6.3 0.9 203+10% 399 012 12 8.4 1.2 360+10% 400 024 24 16.8 2.4 1440+10% 400 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1) Continuous thermal load > 10 A at 105°C requires reduction of coil power to 64% of rated power after 100 ms 1 Datasheet Rev. EL1 Issued 2005/12 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power PCB Relay RTH 105°C 16A (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 5000 Vrms 1000 Vrms W 10 / 10 mm W IIIa PTI 250 V 16 A, pinning 5 mm reinforced functional 250 V 3 240 V 2 400 V III S0418-CA Other data *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. RoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 For WG version: GWFI to IEC 60335-1 > 850 °C GWT to IEC 60335-1 current w 0,2 A > 650 °C current > 0,2 A > 750 °C Ambient temperature range -40...+105°C Operate- / release time typ 7 / 3 ms Bounce time NO / NC contact typ 1 / 3 ms Vibration resistance (function) NO / NC contact 20 / 5 g, 30 ... 150 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof Mounting pcb Mounting distance 0 mm Resistance to soldering heat flux-proof version 270 °C / 10 s Relay weight 14 g Packaging unit 20 / 500 pcs 1 CO contact S0163-BE 1 NO contact Dimensions S0163-BF S0272-BA Product key R T H 4 Type Version H 16 A, pinning 5 mm, 105°C Contact configuration 1 1 CO contact 3 1 NO contact H 1 NO contact “High Performance” Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Product key RTH14012 RTH34012 RTHH4012 RTH14012WG RTH34012WG RTH14024WG RTH34024WG Version 16 A, 105°C pinning 5mm flux proof 16 A, 105°C pinning 5mm flux proof IEC 60335-1 Contacts 1 CO contact 1 NO contact 1 NO high perform. 1 CO contact 1 NO contact 1 CO contact 1 NO contact Contact material AgNi 90/10 Coil 12 VDC 24 VDC Part number 8-1415006-1 9-1415006-1 8-1415047-1 1-1415538-1 1-1415536-9 9-1415535-4 2-1415536-0 2 Datasheet Rev. EL1 Issued 2005/12 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.