SCHRACK General Purpose Relays Power Relay 410 83 3 mm n 1 pole 16 A, 1 NO bridging contact n Contact gap > 3 mm n Switching capacity 4000 VA n Coil power 360 mW n 4 kV / 8 mm coil-contact, insulation to VDE 0631 and 0700 n Ambient temperature up to 85°C n Quick connect terminals for load side n Materials in accordance to IEC 60335-1 Applications F0248-BB Washing machines, tumble dryers, absolute safe power supply disconnection in other domestic applications Approvals V REG.-Nr. 6198, Z E214025 Technical data of approved types on request Contact data Contact configuration 1NO Contact set single contact, bridging contact Type of interruption full disconnection Rated voltage / max. switching voltage AC 250 / 400 VAC Rated current 16 A Maximum breaking capacity AC 4000 VA Limiting making capacity, max 4 s, duty factor 10% 20 A Contact material AgNi Contact gap >3 mm Rated frequency of operation with / without load 10 / 600 min-1 Contact ratings Type Contact Load IEC 410 410 410 16 A, 250 VAC, cosϕ=1 10 A, 250 VAC, cosϕ=1 10 A, 400 VAC, cosϕ=1 61810 83 83 83 NO NO NO Ambient temp. [°C] Cycles 85°C 105°C 105°C 30x103 100x103 100x103 Coil data Rated coil voltage range DC coil Operative range to IEC 61810 Coil insulation system according UL1446 6...60 VDC 1 Class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 053 9 5.9 0.68 230+10% 360 054 6 3.9 0.45 100+10% 360 050 12 7.9 0.9 400+10% 360 046 24 15.8 1.8 1600+10% 360 043 48 31.6 3.6 6400+10% 360 042 60 39.5 4.5 10000+10% 360 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power Relay 410 83 3 mm (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 4000 Vrms 2000 Vrms W 8 / 8 mm W IIIa PTI 250 reinforced full disconnection W 3 mm 250 V 3 230 / 400 V III S0256-CA 1 NO bridging contact Other data 1x106 Mechanical endurance cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0349 Resistance to heat and fire, WG version according EN60335, par.30 Environment Ambient temperature range -20...+85°C Vibration resistance (function) NO (10...500Hz) 10 ms Shock resistance (destruction) 100 g Category of protection RTII - flux proof Processing Mounting pcb Resistance to soldering heat 270°C / 10 s Relay weight 24 g Packaging unit 1050 pcs S0256-CD Dimensions S0282-AB Product key Typical product key 041083 050 001 WG Type 41083 Power Relay 410 83 3 mm Coil Coil code: please refer to coil versions table, preferred types in bold print Version 001 1 NO contact (1 form A) Version WG Product in accordance with IEC 60335-1 (domestic appliances) Other types on request Product key 0410 83 050 001 WG 0410 83 053 001 WG 0410 83 046 001 WG Version standard PCB/quick connect Cont. material AgNi Cont.configuration 1 NO contact Coil 12 VDC 9 VDC 24 VDC Part number 8-1415536-7 8-1415536-8 8-1415536-6 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.