SN78Mxxx 3 Terminal 0.5A Positive Voltage Regulator Semiconductor http:// www.auk.co.kr Description The SN78Mxxx series are three-terminal positive regulators providing 0.5A output current with internal current limiting, thermal shutdown and safe area protection. These regulators are useful in a wide range of applications. Although they are just fixed voltage regulators, the SN78Mxxx series can be used with external components to obtain adjustable voltages and Currents. TO-252-3L Application ◈ Consumer and personal electronics ◈ SMPS post-regulator / dc-to-dc modules ◈ High-efficiency linear power supplies Features and Benefits ◈ Output Current up to 0.5A TO-220F-3L ◈ Output Voltage : 5, 6, 8, 9, 10, 12, 15, 18, 24V ◈ Built in OVP, CLP circuit. ◈ Built in TSD Protection. ORDERING INFORMATION ◈ Output Transistor Safe Area Protection. ◈ Ultra High level of ESD [ Built in ESD Protection Cell ] Product Marking Package SN78MxxD SN78Mxx TO-252-3L SN78MxxPI SN78Mxx TO-220F-3L MM : 500V / HBM 5KV↑ Equivalent Circuit VIN ▲ Marking Detail Information 1 [ TO-220F-3L & TO-253-3L PKG Marking ] Current Source SOA Protection AUK(①) G△YWD (②) SN78Mxxx (③) Starting Circuit Reference Voltage ① AUK Logo Error Amp Thermal Protection ② Grade & M Code & Y/M/D Code ③ Device Code VOUT 3 R1 R2 GND 2 KSD-I0O013-000 December, 2010 REV. 00 1 SN78Mxxx ◈ Pin Configuration 4 1 2 3 1 TO-252-3L 2 3 TO-220F-3L 1: VIN 1: VIN 2: GND 2: GND 3: VOUT 3: VOUT 4: GND ◈ Product Line-up Product Name VOUT Operating Temperature Package SN78M05D 5.0V -40~125℃ TO-252-3L SN78M06D 6.0V -40~125℃ TO-252-3L SN78M08D 8.0V -40~125℃ TO-252-3L SN78M09D 9.0V -40~125℃ TO-252-3L SN78M10D 10V -40~125℃ TO-252-3L SN78M12D 12V -40~125℃ TO-252-3L SN78M15D 15V -40~125℃ TO-252-3L SN78M18D 18V -40~125℃ TO-252-3L SN78M24D 24V -40~125℃ TO-252-3L SN78M05PI 5.0V -40~125℃ TO-220F-3L SN78M06PI 6.0V -40~125℃ TO-220F-3L SN78M08PI 8.0V -40~125℃ TO-220F-3L SN78M09PI 9.0V -40~125℃ TO-220F-3L SN78M10PI 10V -40~125℃ TO-220F-3L SN78M12PI 12V -40~125℃ TO-220F-3L SN78M15PI 15V -40~125℃ TO-220F-3L SN78M18PI 18V -40~125℃ TO-220F-3L SN78M24PI 24V -40~125℃ TO-220F-3L KSD-I0O013-000 December, 2010 REV. 00 2 SN78Mxxx ◈ Absolute Maximum Ratings ( Ta = 25℃ ) Parameter Symbol Input Voltage VIN Limits TO-220F-3L TO-252-3L Unit 40.0 (for VO=24V) V 35.0 (for VO=5 to 18V) Power Dissipation Pd 2.0 1.3 W Thermal Resistance Junction to Case RΘJC 5 5 °C/W Thermal Resistance Junction to Air RΘJA 65 92 °C/W Junction Temperature TJ 150 ℃ Operate Temperature Range Topr -40 ~ +125 ℃ Storage Temperature Range Tstg -55 ~ +150 ℃ Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max) , the junction-to-ambient thermal resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max) = (TJ(max) – TA) ÷ θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. KSD-I0O013-000 December, 2010 REV. 00 3 SN78Mxxx ◈ Electrical characteristics ( VIN=10V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M05x Characteristic Output Voltage** Symbol VO Test Condition* Unit Min. Typ. TJ =25℃ 4.80 5.0 5.20 7.0V ≤ VIN ≤ 20.0V 5.0mA ≤ IO ≤ 350mA 4.75 5.0 5.25 - - 100 8.0V ≤ VIN ≤ 25.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 100 5.0mA ≤ IO ≤ 200mA - - 50 TJ =25℃ - 4.0 6.0 8.0V ≤ VIN ≤ 25V, IO=200mA - - 0.8 V 7.0V ≤ VIN ≤ 25.0V, IO=200mA Line Regulation Load Regulation Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△VI) mV TJ =25℃ ÌVO(△IL) IQC Max. ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 8.0V ≤ VIN ≤ 18.0V, IO=300 ㎃ f=120Hz - 0.5 62 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 40 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -0.5 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 4 SN78Mxxx ◈ Electrical characteristics ( VIN=11V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M06x Characteristic Symbol Test Condition* TJ =25℃ Output Voltage** VO Load Regulation Quiescent Current Quiescent Current Change 5.75 6.0 Max. 6.25 5.70 6.0 6.3 - - 100 mV TJ =25℃ ÌVO(△VI) 9.0V ≤ VIN ≤ 25.0V - - 50 5.0mA ≤ IO ≤ 500mA - - 120 5mA ≤ IO ≤ 500mA - - 60 TJ =25℃ - 4.0 6.0 9.0V ≤ VIN ≤ 25.0V, IO=200mA - - 0.8 5.0mA ≤ IO ≤ 350mA - - 0.5 59 - - dB mV TJ =25℃ ÌVO(△IL) IQC Typ. V 8.0V ≤ VIN ≤ 21.0V 5.0mA ≤ IO ≤ 350mA 8.0V ≤ VIN ≤ 25.0V Line Regulation Unit Min. ∆IQC Ripple Rejection RR Dropout Voltage VDROP mA mA 9.0V ≤ VIN ≤ 19.0V f=120Hz IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 45 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -0.5 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 5 SN78Mxxx ◈ Electrical characteristics ( VIN=14V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M08x Characteristic Output Voltage** Symbol VO Test Condition* Unit Min. Typ. TJ =25℃ 7.7 8.0 8.3 10.5V ≤ VIN ≤ 23.0V 5.0mA ≤ IO ≤ 350mA 7.6 8.0 8.4 - - 100 V 10.5V ≤ VIN ≤ 25.0V, IO=200mA Line Regulation Load Regulation Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△VI) 11.0V ≤ VIN ≤ 25.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 160 5.0mA ≤ IO ≤ 200mA - - 80 TJ =25℃ - 4.0 6.0 10.5V ≤ VIN ≤ 25.0V, IO=200mA - - 0.8 mV TJ =25℃ ÌVO(△IL) IQC Max. ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 11.5V ≤ VIN ≤ 21.5V, IO=300mA f=120Hz - - 0.5 56 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 52 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -0.5 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 6 SN78Mxxx ◈ Electrical characteristics ( VIN=15V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M09x Characteristic Output Voltage** Symbol VO Test Condition* Unit Min. Typ. TJ =25℃ 8.65 9.0 9.35 11.5V ≤ VIN ≤ 24.0V 5.0mA ≤ IO ≤ 350mA 8.55 9.0 9.45 - - 100 V 11.5V ≤ VIN ≤ 25.0V, IO=200mA Line Regulation Load Regulation Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△VI) 12.0V ≤ VIN ≤ 25.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 180 5.0mA ≤ IO ≤ 200mA - - 90 TJ =25℃ - 4.0 6.0 11.5V ≤ VIN ≤ 25.0V - - 0.8 mV TJ =25℃ ÌVO(△IL) IQC Max. ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 12.5V ≤ VIN ≤ 23.0V, IO=300mA f=120Hz - - 0.5 56 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 58 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 250 - mA - -0.5 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 7 SN78Mxxx ◈ Electrical characteristics ( VIN=17V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M10x Characteristic Output Voltage** Symbol VO Test Condition* Unit Min. Typ. Max. TJ =25℃ 9.6 10.0 10.4 12.5V ≤ VIN ≤ 25.0V 5.0mA ≤ IO ≤ 350mA 9.5 10.0 10.5 - - 100 V 12.5V ≤ VIN ≤ 25.0V, IO=200mA Line Regulation 13.0V ≤ VIN ≤ 25.0V, IO=200mA 5.0mA ≤ IO ≤ 500mA Load Regulation Quiescent Current Quiescent Current Change - - 50 - - 200 mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 5mA ≤ IO ≤ 200mA - - 100 TJ =25℃ - 4.1 6.0 12.5V ≤ VIN ≤ 25V, IO=200mA - - 0.8 5.0mA ≤ IO ≤ 350mA - - 0.5 55 - - dB ∆IQC Ripple Rejection RR Dropout Voltage VDROP mA mA 13.0V ≤ VIN ≤ 23.0V, IO=300mA f=120Hz IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 65 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -0.5 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 8 SN78Mxxx ◈ Electrical characteristics ( VIN=19V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M12x Characteristic Output Voltage** Symbol VO Test Condition* Unit Min. Typ. Max. TJ =25℃ 11.5 12.0 12.5 14.5V ≤ VIN ≤ 27.0V 5.0mA ≤ IO ≤ 350mA 11.4 12.0 12.6 - - 100 V 14.5V ≤ VIN ≤ 30.0V, IO=200mA Line Regulation Load Regulation Quiescent Current Quiescent Current Change 16.0V ≤ VIN ≤ 30.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 240 5.0mA ≤ IO ≤ 200mA - - 120 TJ =25℃ - 4.1 6.0 14.5V ≤ VIN ≤ 30.0V, IO=200mA - - 0.8 mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 15.0V ≤ VIN ≤ 25.0V, IO=300mA f=120Hz - - 0.5 55 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 75 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -0.5 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 9 SN78Mxxx ◈ Electrical characteristics ( VIN=23V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M15x Characteristic Output Voltage** Symbol VO Test Condition* Unit Min. Typ. Max. TJ =25℃ 14.4 15.0 15.6 17.5V ≤ VIN ≤ 30.0V 5.0mA ≤ IO ≤ 350mA 14.25 15.0 15.75 - - 100 V 17.5V ≤ VIN ≤ 30.0V, IO=200mA Line Regulation Load Regulation Quiescent Current Quiescent Current Change 20.0V ≤ VIN ≤ 30.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 300 5.0mA ≤ IO ≤ 200mA - - 150 TJ =25℃ - 4.1 6.0 17.5V ≤ VIN ≤ 30.0V, IO=200mA - - 0.8 mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 18.5V ≤ VIN ≤ 28.5V, IO=300mA f=120Hz - - 0.5 54 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 100 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -1.0 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 10 SN78Mxxx ◈ Electrical characteristics ( VIN=26V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M18x Characteristic Symbol Test Condition* Unit TJ =25℃ Output Voltage** VO Load Regulation Quiescent Current Quiescent Current Change Max. 17.3 18.0 18.7 17.1 18.0 18.9 - - 100 mV TJ =25℃ ÌVO(△VI) 24.0V ≤ VIN ≤ 33.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 360 5.0mA ≤ IO ≤ 200mA - - 180 TJ =25℃ - 4.2 6.0 21.0V ≤ VIN ≤ 33.0V, IO=200mA - - 0.8 mV TJ =25℃ ÌVO(△IL) IQC Typ. V 20.5V ≤ VIN ≤ 33.0V 5.0mA ≤ IO ≤ 350mA 21.0V ≤ VIN ≤ 33.0V, IO=200mA Line Regulation Min. ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 22.0V ≤ VIN ≤ 32.0V, IO=300mA f=120Hz - - 0.5 53 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 100 - uV/ VO Short Circuit Current ISC VI =35V TA =25℃ - 300 - mA - -1.1 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 11 SN78Mxxx ◈ Electrical characteristics ( VIN=33V, CIN = 0.33uF, COUT = 0.1uF, IOUT = 350mA, TJ=0℃~125℃ ; unless otherwise specified ) SN78M24x Characteristic Symbol Test Condition* Unit TJ =25℃ Output Voltage** VO Load Regulation Quiescent Current Quiescent Current Change Max. 23.0 24.0 25.0 22.8 24.0 25.25 - - 100 mV TJ =25℃ ÌVO(△VI) 28.0V ≤ VIN ≤ 38.0V, IO=200mA - - 50 5.0mA ≤ IO ≤ 500mA - - 480 5.0mA ≤ IO ≤ 200mA - - 240 TJ =25℃ - 4.2 6.0 27.0V ≤ VIN ≤ 38.0V, IO=200mA - - 0.8 mV TJ =25℃ ÌVO(△IL) IQC Typ. V 27.0V ≤ VIN ≤ 38.0V 5.0mA ≤ IO ≤ 350mA 27.0V ≤ VIN ≤ 38.0V, IO=200mA Line Regulation Min. ∆IQC mA 5.0mA ≤ IO ≤ 350mA Ripple Rejection RR Dropout Voltage VDROP mA 28.0V ≤ VIN ≤ 38.0V, IO=300mA f=120Hz - - 0.5 50 - - dB IO=500mA TJ =25℃ - 2.0 - V Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz TA =25℃ - 170 - uV/ VO Short Circuit Current ISC VI =35V, TA =25℃ - 300 - mA - -1.2 - mV/℃ Temperature coefficient of Output voltage △VO/ △Temp IO=5.0mA * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O013-000 December, 2010 REV. 00 12 SN78Mxxx Typical Application Fixed Output Regulator SN78Mxxx VIN + CIN CO RL VOUT – 1) CIN should be required if regulators are located far from power supply filter 2) CO improves output stability and transient response Load Regulation SN78Mxxx VIN + VOUT RL CIN VC VC STC4350F 0V – Constant Current Regulator SN78Mxxx VIN VOUT CIN R1 CO IQ IO IO= V1 R1 RL + IQ KSD-I0O013-000 December, 2010 REV. 00 V1 13 SN78Mxxx Adjustable Output Regulator SN78Mxxx + – VIN CIN SN321 + VR VOUT CO – High Current Voltage Regulator Q1 STA723D RIN VIN SN78Mxxx + IIN IO CIN VOUT CO – IO= IIN + βQ1(IIN–VBEQ1 / RIN) KSD-I0O013-000 December, 2010 REV. 00 14 SN78Mxxx Fig.2 Output Peak Current vs. Input to Output Differential Fig.1 Quiescent Current vs. Junction Temperature 4.0 1.2 3.5 Output peak Current [A] Quiescent Current [mA] VIN=10V VOUT=5V IOUT=5mA 3.0 2.5 2.0 1.5 1.0 0.8 0.6 0.4 0.2 1.0 0.0 -40 0 25 50 75 100 0 125 10 Fig.3 Output Voltage vs. Junction Temperature 20 25 30 35 Fig.4 Dropout Voltage vs. Input Voltage 2.8 5.4 VIN=10V 2.6 5.2 VOUT=5V 2.4 5.1 IOUT=5mA Dropout Voltage [V] 5.3 5.0 4.9 4.8 4.7 SN78Mxxx 2.2 2.0 IO=500mA 1.8 1.6 IO=250mA 1.4 1.2 4.6 1.0 -40 4.5 -40 0 25 50 75 100 125 150 0 Fig.5 Line Transient Response Output Voltage Deviation [mV] Input Voltage SN78M05 10V Output Voltage Deviation 10 0.0 -10 CIN=0.33uF, COUT=0.1uF Iout=100mA, Ta=25℃ 20 40 60 80 75 100 125 150 100 120 140 Load Current 0.5A SN78M05 0A Output Voltage Deviation 100 0 -100 CIN=0.33uF, COUT=0.1uF VIN=10V, Ta=25℃ 0 20 40 60 80 100 120 140 Time [us] Time [us] KSD-I0O013-000 December, 2010 REV. 00 50 Fig.6 Load Transient Response 15V 0 25 Junction Temperature [℃] Junction Temperature [℃] Output Voltage Deviation [mV] 15 Input to Output Differential [V] Junction Temperature [℃] Output Voltage [V] 5 15 SN78Mxxx (Unit : mm) Θ ◈ TO-252-3L Outline Dimension Θ Θ Θ ※ Recommend PCB solder land [Unit: mm] 2.50 7.00 7.00 1.50 4.60 KSD-I0O013-000 December, 2010 REV. 00 16 SN78Mxxx ◈ TO-220F-3L Outline Dimension (Unit : mm) KSD-I0O013-000 December, 2010 REV. 00 17 SN78Mxxx The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-I0O013-000 December, 2010 REV. 00 18