SN78xxx 3 Terminal 1A Positive Voltage Regulator Semiconductor Description http:// www.auk.co.kr The SN78xxx series are three-terminal positive regulators providing over 1A output current with internal current limiting, thermal shutdown and safe area protection. These regulators are useful in a wide range of applications. Although they are just fixed voltage regulators, the SN78xxx series can be used with external components to obtain adjustable voltages and Currents. TO-252-3L Application ◈ Consumer and personal electronics ◈ SMPS post-regulator / dc-to-dc modules ◈ High-efficiency linear power supplies Features and Benefits ◈ Output Current up to 1.0A TO-220F-3L ◈ Output Voltage : 5, 6, 8, 9, 10, 12, 15, 18, 24V ◈ Built in OVP, CLP circuit. ◈ Built in TSD Protection. ORDERING INFORMATION ◈ Output Transistor Safe Area Protection. ◈ Ultra High level of ESD [ Built in ESD Protection Cell ] Product Marking Package SN78xxD SN78xxD TO-252-3L SN78xxPI SN78xxPI TO-220F-3L MM : 500V / HBM 5KV Equivalent Circuit VIN ▲ Marking Detail Information 1 [ TO-220F-3L & TO-253-3L PKG Marking ] Current Source SOA Protection AUK(①) G△YWW (②) Starting Circuit SN78xxx (③) Reference Voltage ① AUK Logo ② Grade & M Code & Year & Week Code ③ Device Code Error Amp Thermal Protection VOUT 3 R1 R2 GND 2 KSD-I0O008-004 Jan. 2010 REV. 04 1 SN78xxx ◈ Pin Configuration 4 1 2 3 1 TO-252-3L 2 3 TO-220F-3L 1: VIN 1: VIN 2: GND 2: GND 3: VOUT 3: VOUT 4: GND ◈ Product Line-up Product Name VOUT Operating Temperature Package SN7805D 5.0V -40~125℃ TO-252-3L SN7806D 6.0V -40~125℃ TO-252-3L SN7808D 8.0V -40~125℃ TO-252-3L SN7809D 9.0V -40~125℃ TO-252-3L SN7810D 10V -40~125℃ TO-252-3L SN7812D 12V -40~125℃ TO-252-3L SN7815D 15V -40~125℃ TO-252-3L SN7818D 18V -40~125℃ TO-252-3L SN7824D 24V -40~125℃ TO-252-3L SN7805PI 5.0V -40~125℃ TO-220F-3L SN7806PI 6.0V -40~125℃ TO-220F-3L SN7808PI 8.0V -40~125℃ TO-220F-3L SN7809PI 9.0V -40~125℃ TO-220F-3L SN7810PI 10V -40~125℃ TO-220F-3L SN7812PI 12V -40~125℃ TO-220F-3L SN7815PI 15V -40~125℃ TO-220F-3L SN7818PI 18V -40~125℃ TO-220F-3L SN7824PI 24V -40~125℃ TO-220F-3L KSD-I0O008-004 Jan. 2010 REV. 04 2 SN78xxx ◈ Absolute Maximum Ratings ( Ta = 25℃ ) Parameter Symbol Input Voltage VIN Limits TO-220F-3L TO-252-3L Unit 40.0 ( VO=24V ) V 35.0 ( VO=5 to 18V ) Power Dissipation Pd 2.0 1.3 W Thermal Resistance Junction to Case RΘJC 5 5 °C/W Thermal Resistance Junction to Air RΘJA 65 92 °C/W Junction Temperature TJ 150 °C Operate Temperature Range Topr -40 ~ +125 °C Storage Temperature Range Tstg -55 ~ +150 °C Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max) , the junction-to-ambient thermal resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max) = (TJ(max) – TA) ÷ θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. KSD-I0O008-004 Jan. 2010 REV. 04 3 SN78xxx ◈ Electrical characteristics ( VIN=10V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7805x Characteristic Output Voltage** Symbol VO Test Condition* Typ. Max. TJ =25℃ 4.80 5.00 5.20 7.0V ≤ VIN ≤ 20.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 4.75 5.00 5.25 - 4.0 100 - 1.6 50 - 9.0 100 250mA ≤ IO ≤ 750mA - 4.0 50 TJ =25℃ - 3.2 8.0 7.0V ≤ VIN ≤ 25V - 0.3 1.3 0.03 0.5 62 73 - dB V 7.0V ≤ VIN ≤ 25.0V Line Regulation 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 8.0V ≤ VIN ≤ 12.0V Load Regulation Unit Min. mA ÌIQC 5.0mA ≤ IO ≤ 1.0A Ripple Rejection RR Dropout Voltage VDROP mA 8.0V ≤ VIN ≤ 18.0V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 42 - uV/ VO - 15 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -0.8 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 4 SN78xxx ◈ Electrical characteristics ( VIN=11V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7806x Characteristic Output Voltage** Symbol VO Test Condition* Typ. Max. TJ =25℃ 5.75 6.00 6.25 8.0V ≤ VIN ≤ 21V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 5.70 6.00 6.30 - 5.0 120 - 1.5 60 - 9.0 120 250mA ≤ IO ≤ 750mA - 3.0 60 TJ =25℃ - 5.0 8.0 8.0V ≤ VIN ≤ 25.0V - - 1.3 5.0mA ≤ IO ≤ 1.0A - - 0.5 9.0V ≤ VIN ≤ 19.0V f=120Hz 59 75 - dB V 8.0V ≤ VIN ≤ 25.0V Line Regulation 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 9.0V ≤ VIN ≤ 13.0V Load Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 45 - uV/ VO - 19 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -0.8 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 5 SN78xxx ◈ Electrical characteristics ( VIN=14V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7808x Characteristic Output Voltage** Symbol VO Test Condition* Typ. Max. TJ =25℃ 7.70 8.00 8.30 10.5V ≤ VIN ≤ 23.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 7.60 8.00 8.40 - 5.0 160 - 2.0 80 - 10.0 160 250mA ≤ IO ≤ 750mA - 5.0 80 TJ =25℃ - 5.0 8.0 10.5V ≤ VIN ≤ 25.0V - 0.5 1.0 5.0mA ≤ IO ≤ 1.0A - 0.05 0.5 56 73 - dB V 10.5V ≤ VIN ≤ 25.0V Line Regulation 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 11.5V ≤ VIN ≤ 17.0V Load Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 11.5V ≤ VIN ≤ 21.5V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 52 - uV/ VO - 17 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V, Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -0.8 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 6 SN78xxx ◈ Electrical characteristics ( VIN=15V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7809x Characteristic Output Voltage** Symbol VO Test Condition* Typ. Max. TJ =25℃ 8.65 9.00 9.35 11.5V ≤ VIN ≤ 24.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 8.60 9.00 9.40 - 6.0 180 - 2.0 90 - 12.0 180 250mA ≤ IO ≤ 750mA - 4.0 90 TJ =25℃ - 5.0 8.0 11.5V ≤ VIN ≤ 26.0V - - 1.3 5.0mA ≤ IO ≤ 1.0A - - 0.5 56 71 - dB V 11.5V ≤ VIN ≤ 25.0V Line Regulation 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 12.0V ≤ VIN ≤ 17.0V Load Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 12.0V ≤ VIN ≤ 22.0V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 58 - uV/ VO - 17 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -1.0 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 7 SN78xxx ◈ Electrical characteristics ( VIN=16V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7810x Characteristic Output Voltage** Symbol VO Test Condition* Typ. TJ =25℃ 9.60 10.00 10.40 12.5V ≤ VIN ≤ 25.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 9.50 10.00 10.50 - 10.0 200 - 3.0 100 - 12.0 200 250mA ≤ IO ≤ 750mA - 4.0 100 TJ =25℃ - 5.1 8.0 12.5V ≤ VIN ≤ 29V - - 1.0 5.0mA ≤ IO ≤ 1.0A - - 0.5 56 71 - dB 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 13.0V ≤ VIN ≤ 18.0V Load Regulation Max. V 12.5V ≤ VIN ≤ 25.0V Line Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 13.0V ≤ VIN ≤ 23.0V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 58 - uV/ VO - 17 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V, Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -1.0 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 8 SN78xxx ◈ Electrical characteristics ( VIN=19V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7812x Characteristic Output Voltage** Symbol VO Test Condition* Typ. TJ =25℃ 11.50 12.00 12.50 14.5V ≤ VIN ≤ 27.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 11.40 12.00 12.60 - 10.0 240 - 3.0 120 - 11.0 240 250mA ≤ IO ≤ 750mA - 5.0 120 TJ =25℃ - 5.1 8.0 14.5V ≤ VIN ≤ 30.0V - 0.5 1.0 5.0mA ≤ IO ≤ 1.0A - 0.1 0.5 55 71 - dB 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 16.0V ≤ VIN ≤ 22.0V Load Regulation Max. V 14.5V ≤ VIN ≤ 30.0V Line Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 15.0V ≤ VIN ≤ 25.0V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 76 - uV/ VO - 15 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -1.0 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 9 SN78xxx ◈ Electrical characteristics ( VIN=23V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7815x Characteristic Output Voltage** Symbol VO Test Condition* Typ. TJ =25℃ 14.40 15.00 15.60 17.5V ≤ VIN ≤ 30.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 14.25 15.00 15.75 - 11.0 300 - 3.0 150 - 12.0 300 250mA ≤ IO ≤ 750mA - 4.0 150 TJ =25℃ - 5.2 8.0 17.5V ≤ VIN ≤ 30.0V - - 1.0 5.0mA ≤ IO ≤ 1.0A - - 0.5 54 70 - dB 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 20.0V ≤ VIN ≤ 26.0V Load Regulation Max. V 17.5V ≤ VIN ≤ 30.0V Line Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 18.5V ≤ VIN ≤ 28.5V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 90 - uV/ VO - 19 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -1.0 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 10 SN78xxx ◈ Electrical characteristics ( VIN=27V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7818x Characteristic Output Voltage** Symbol VO Test Condition* Typ. TJ =25℃ 17.30 18.00 18.70 21.0V ≤ VIN ≤ 33.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 17.10 18.00 18.90 - 15.0 360 - 5.0 180 - 15.0 360 250mA ≤ IO ≤ 750mA - 5.0 180 TJ =25℃ - 5.2 8.0 21.0V ≤ VIN ≤ 33.0V - - 1.0 5.0mA ≤ IO ≤ 1.0A - - 0.5 53 69 - dB 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 24.0V ≤ VIN ≤ 30.0V Load Regulation Max. V 21.0V ≤ VIN ≤ 33.0V Line Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 22.0V ≤ VIN ≤ 32.0V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 110 - uV/ VO - 22 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -1.0 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 11 SN78xxx ◈ Electrical characteristics ( VIN=33V, CIN = 0.33uF, COUT = 0.1 uF, IOUT = 500mA, TJ=0℃~125℃ ; unless otherwise specified ) SN7824x Characteristic Output Voltage** Symbol VO Test Condition* Typ. TJ =25℃ 23.00 24.00 25.00 27.0V ≤ VIN ≤ 38.0V 5.0mA ≤ IO ≤ 1.0A, PD ≤ 15W 22.80 24.00 25.25 - 17.0 480 - 6.0 240 - 15.0 480 250mA ≤ IO ≤ 750mA - 5.0 240 TJ =25℃ - 5.2 8.0 27.0V ≤ VIN ≤ 38.0V - 0.5 1.0 5.0mA ≤ IO ≤ 1.0A - 0.1 0.5 50 67 - dB 5.0mA ≤ IO ≤ 1.5A Quiescent Current Quiescent Current Change mV TJ =25℃ ÌVO(△IL) IQC mV TJ =25℃ ÌVO(△VI) 30.0V ≤ VIN ≤ 36.0V Load Regulation Max. V 27.0V ≤ VIN ≤ 38.0V Line Regulation Unit Min. mA ÌIQC Ripple Rejection RR Dropout Voltage VDROP mA 28.0V ≤ VIN ≤ 38.0V f=120Hz IO=1.0A TJ =25℃ - 2.0 - V TA =25℃ - 60 - uV/ VO - 28 - mΩ - 250 - mA Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz Output Resistance rO f=1.0kHz Short Circuit Current ISC VI =35V Peak Output Current IPK TJ =25℃ - 2.2 - A △VO/ △Temp IO=5.0mA - -1.5 - mV/°C Temperature coefficient of Output voltage TA =25℃ * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O008-004 Jan. 2010 REV. 04 12 SN78xxx Typical Application Fixed Output Regulator SN78xxx VIN + CIN CO RL VOUT – 1) CIN should be required if regulators are located far from power supply filter 2) CO improves output stability and transient response Load Regulation SN78xxx VIN + VOUT RL CIN VC VC STC4350F 0V – Constant Current Regulator SN78xxx VIN VOUT CIN R1 CO IQ IO IO= V1 R1 RL + IQ KSD-I0O008-004 Jan. 2010 REV. 04 V1 13 SN78xxx Adjustable Output Regulator SN78xxx + – VIN CIN SN321 + VR VOUT CO – High Current Voltage Regulator Q1 STA723D RIN VIN SN78xxx + IIN IO CIN VOUT CO – IO= IIN + βQ1(IIN–VBEQ1 / RIN) KSD-I0O008-004 Jan. 2010 REV. 04 14 SN78xxx Fig.2 Output Peak Current vs. Input to Output Differential Fig.1 Quiescent Current vs. Junction Temperature Fig.3 Output Voltage vs. Junction Temperature Fig.6 Load Transient Response 0.5 INPUT VOLTAGE 15.0 Load Current [A] Output Voltage Deviation [mV] Fig.5 Line Transient Response Fig.4 Dropout Voltage vs. Junction Temperature 10.0 10 OUTPUT VOLTAGE DEVIATION 0 -10 Cin=0.33uF, Cout=0.1uF OUTPUT VOLTAGE DEVIATION 0 -0.5 LOAD CURRENT 1.0 0 Cin=0.33uF, Cout=0.1uF Iout=5mA, TA=25℃ 0 0.4 0.8 1.2 1.6 Vo=5V, TA=25℃ 2.0 0 80 120 160 200 Time [µS] Time [mS] KSD-I0O008-004 Jan. 2010 REV. 04 40 15 SN78xxx (Unit : mm) Θ ◈ TO-252-3L Outline Dimension Θ Θ Θ ※ Recommend PCB solder land [Unit: mm] 2.50 7.00 7.00 1.50 4.60 KSD-I0O008-004 Jan. 2010 REV. 04 16 SN78xxx ◈ TO-220F-3L Outline Dimension (Unit : mm) KSD-I0O008-004 Jan. 2010 REV. 04 17 SN78xxx The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-I0O008-004 Jan. 2010 REV. 04 18