S79xxD Semiconductor Fixed Voltage Regulator Descriptions This series of fixed-negative-voltage monolithic integrated-circuit voltage regulators is designed to complement series S7800 in a wide range of applications. These applications include on-card regulator for elimination of noise and distribution problems associated with single point regulations. Each of these regulators can deliver up to 1.0 amperes of output current. The internal current Limiting and thermal shutdown features of these regulators make them essentially immune to overload. In addition to use as fixed-voltage regulators, these device can be used with external components to obtain adjustable output voltages and also as the power pass element in precision regulators. Features • Output Current UP to 1.0A • Internal Thermal Overload Protection • Internal Short-Circuit Current Limiting • No External Components • Output Transistor Safe-Area Compensations Ordering Information Type NO. S79xxD Marking S79□□D Package Code D-PAK □□:Voltage Code (05:-5V, 08:-8V, 09:-9V, 12:-12V,15:-15V) Outline Dimensions unit : mm PIN Connections 1. GND 2. Input 3. Output KSI-2027-001 1 S79xxD Absolute Maximum Ratings Ta=25°C Characteristic Symbol Ratings Unit Operating Input voltage VIN -35 V Power Dissipation (TC=25℃) PD 12 W Power Dissipation (without Heatsink) PD 1.3 W Operating Junction Temperature TJ 30 ~ 125 °C TSTG -55 ~ 150 °C Storage Temperature Electrical Characteristics ( ❈ VIN = -10V, IOUT = 500mA, Tj = 0°C ~ 125°C, Characteristic Symbol Output Voltage VOUT Unless otherwise noted) ÌVOUT Typ. Max. -4.8 -5.0 -5.2 -4.75 -5.0 -5.25 - 12.5 50 - 4 15 - 15 100 - 5 50 - 1.5 2.0 VIN = -7.0V ~ -25V - 0.15 0.5 IOUT = 5mA ~ 1A - 0.08 0.5 - 125 - uVrms 54 60 - dB - 2.0 - V - -0.4 - mV/°C - 2.1 - A Tj =25℃ IOUT=5mA ~ 1A VIN=-7.0V ~ -20V, PD≤ 15W VIN=-8.0V ~ -12V IOUT=5mA ~ 1.0A Load Regulation ÌVOUT Quiescent Current IOUT=250mA ~ 750mA ÌIB Tj =25℃ Tj =25℃ Tj =25℃ IB Quiescent Current Change Output Noise Voltage VN f=10Hz ~ 100KHz Ripple Rejection Ratio RR f=120Hz, VIN =-8.0V ~ -18V Dropout Voltage VD IOUT=1A Temperature coefficient output Voltage Drift Peak Output Current of TCVO Unit Min. VIN=-7.0V ~ -25V Line Regulation S7905D Test Condition Tj =25℃ Tj =25℃ IOUT=5mA Tj =25℃ IPK V mV mV mA mA ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2027-001 2 S79xxD Electrical Characteristics (TJ = 0 to 125℃, Vin= -14V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Output Voltage VOUT ÌVOUT Typ. Max. -7.7 -8.0 -8.3 -7.6 -8.0 -8.4 - 12.5 160 - 4 80 - 15 160 - 5 80 - 1.5 2.0 VIN = -10.5V ~ -25V - 0.15 1.0 IOUT = 5mA ~ 1A - 0.08 0.5 - 200 - uVrms 54 60 - dB Tj =25℃ IOUT=5mA ~ 1A VIN=-10.5V ~ -23V, PD≤ 15W VIN=-11.0V ~ -17V IOUT=5mA ~ 1.0A Load Regulation ÌVOUT Quiescent Current IOUT=250mA ~ 750mA ÌIB Tj =25℃ Tj =25℃ Tj =25℃ IB Quiescent Current Change Unit Min. VIN=-10.5V ~ -25V Line Regulation S7908D Test Condition V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz Ripple Rejection Ratio RR f=120Hz, VIN =-11.5V ~ -21.5V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -0.6 - mV/°C Tj =25℃ - 2.1 - A Temperature coefficient output Voltage Drift Peak Output Current of TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2027-001 3 S79xxD Electrical Characteristics (TJ = 0 to 125℃, Vin= -15V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Output Voltage VOUT ÌVOUT Typ. Max. -8.70 -9.0 -9.30 -8.60 -9.0 -9.40 - 10 180 - 5 90 - 12 180 - 4 90 - 3 6 VIN = -11.5V ~ -25V - 0.1 1.0 IOUT = 5mA ~ 1A - 0.08 0.5 - 175 - uVrms 54 60 - dB Tj =25℃ IOUT=5mA ~ 1A VIN=-11.5V ~ -23V, PD≤ 15W VIN=-110V ~ -17V IOUT=5mA ~ 1.0A Load Regulation ÌVOUT Quiescent Current IOUT=250mA ~ 750mA ÌIB Tj =25℃ Tj =25℃ Tj =25℃ IB Quiescent Current Change Unit Min. VIN=-10.5V ~ -25V Line Regulation S7909D Test Condition V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz Ripple Rejection Ratio RR f=120Hz, VIN =-9.0V ~ -19V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -0.4 - mV/°C Tj =25℃ - 2.1 - A Temperature coefficient output Voltage Drift Peak Output Current of TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2027-001 4 S79xxD Electrical Characteristics (TJ = 0 to 125℃, Vin= -19V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Output Voltage VOUT ÌVOUT Typ. Max. -11.5 -12.0 -12.5 -11.4 -12.0 -12.6 - 5 80 - 3 30 - 15 200 - 5 75 - 2.0 3.0 VIN = -14.5V ~ -30V - 0.04 0.5 IOUT = 5mA ~ 1A - 0.08 0.5 - 300 - uVrms 54 60 - dB Tj =25℃ IOUT=5mA ~ 1A VIN=-14.5V ~ -27V, PD≤ 15W VIN=-16.0V ~ -22V IOUT=5mA ~ 1.0A Load Regulation ÌVOUT Quiescent Current IOUT=250mA ~ 750mA ÌIB Tj =25℃ Tj =25℃ Tj =25℃ IB Quiescent Current Change Unit Min. VIN=-14.5V ~ -30V Line Regulation S7912D Test Condition V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz, Ripple Rejection Ratio RR f=120Hz, VIN =-15V ~ -25V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -0.8 - mV/°C Tj =25℃ - 2.1 - A Temperature coefficient output Voltage Drift Peak Output Current of TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2027-001 5 S79xxD Electrical Characteristics (TJ = 0 to 125℃, Vin= -23V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Output Voltage VOUT ÌVOUT Typ. Max. -14.4 -15.0 -15.6 -14.25 -15.0 -15.75 - 5 100 - 3 50 - 15 200 - 5 75 - 2.0 3.0 VIN = -17.5V ~ -30V - 0.04 0.5 IOUT = 5mA ~ 1A - 0.08 0.5 - 375 - uVrms 54 60 - dB Tj =25℃ IOUT=5mA ~ 1A VIN=-17.5V ~ -30V, PD≤ 15W VIN=-20V ~ -26V IOUT=5mA ~ 1.0A Load Regulation ÌVOUT Quiescent Current IOUT=250mA ~ 750mA ÌIB Tj =25℃ Tj =25℃ Tj =25℃ IB Quiescent Current Change Unit Min. VIN=-17.5V ~ -30V Line Regulation S7915D Test Condition V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz, Ripple Rejection Ratio RR f=120Hz, VIN =-18.5V ~ -28.5V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -1.0 - mV/°C Tj =25℃ - 2.1 - A Temperature coefficient output Voltage Drift Peak Output Current of TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ■Test circuit . KSI-2027-001 6 S79xxD Electrical Characteristic Curves Fig. 1 VOUT - VIN Fig. 2 Dropout - Voltage Fig. 3 IB - Tj Fig. 4 VOUT - Tj Fig. 5 ISC - VIN KSI-2027-001 7 S79xxD These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KSI-2027-001 8