915.00 MHz SAW Filter • Designed to Rx Selectivity in 915.00 MHz • Low-Loss, Coupled-Resonator Quartz Design • Simple External Impedance Matching • Ultra Miniature Ceramic DCC6 SMD Package • Complies with Directive 2002/95/EC (RoHS Compliant) SF5033 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit 0 dBm +12 V RF Power Dissipation P DC Voltage Between Any Two Pins VDC AC Voltage Between Any Two Pins VPP 10 V Operating Temperature Range TA -10 ~ +60 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics Parameter Sym Minimum Typical Maximum Unit fC NS 915.00 NS MHz IL - 3.5 4.5 dB 3dB Bandwidth BW3 28.0 28.5 30.0 MHz 20dB Bandwidth BW20 - - 43 MHz 40dB Bandwidth BW40 - - 80 MHz ∆α - 1.0 1.5 dB αrel 45 50 - dB Nominal Frequency (at 25°C) (Center frequency between 3dB point) Insertion Loss 904.00 … 926.00 MHz Amplitude Ripple (p-p) 904.00 … 926.00 MHz Absolute Attenuation (relative to IL) fC - 400.0MHz … fC - 40.80MHz fC + 50.00MHz … fC + 400.0MHz 47 50 - dB |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impendance (nominal) - - 50 - Ω Frequency Aging Absolute Value during the First Year NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. The specifications of this device are based on the test circuit Phone: +86 (10) 5128 1211 Fax: +86 (10) 5820 3915 © September 2006 by Vanlong Technology Co., Ltd. shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Email: [email protected] Web: http://www.vanlong.com SF5033 915.00 MHz SAW Filter Package Dimensions (DCC6) Electrical Connections Terminals 2 5 1,3,4,6 Connection Input Output Ground Package Dimensions Dimensions A B C D Marking Nom (mm) 1.90 0.64 1.00 1.27 Dimensions E F G Nom (mm) 3.80 3.80 1.20 Test Circuit 1. F5033 - Part Code F5033 YWW 2. Date Code: Y : Last digit of year From 50Ω source To 50Ω load WW : Week No. Typical Frequency Response Phone: +86 (10) 5128 1211 Fax: +86 (10) 5820 3915 © September 2006 by Vanlong Technology Co., Ltd. Email: [email protected] Web: http://www.vanlong.com SF5033