VISHAY 2KBB20

2KBB Series
Vishay High Power Products
Single Phase Rectifier Bridge, 1.9 A
FEATURES
• Suitable for printed circuit board mounting
RoHS
• Leads on standard 2.54 mm (0.1") grid
COMPLIANT
• Compact construction
• High surge current capability
• Polarized package
• Equivalent to standard DIN parts
2KBB
• RoHS compliant
DESCRIPTION
PRODUCT SUMMARY
IO
1.9 A
VRRM
100 to 1000 V
A 1.9 A single phase diode bridge rectifier assembly
consisting of four silicon diodes in a plastic encapsulation,
intended for general applications in industrial and consumer
equipment.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
VALUES
UNITS
1.9
A
IO
IFSM
I2 t
50 Hz
50
60 Hz
52
50 Hz
17.7
60 Hz
16.1
A
A2 s
VRRM
100 to 1000
V
TJ
- 40 to 150
°C
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS AND APPLICATION DATA
CROSS REFERENCE
IRM
VRRM, VRSM
TYPICAL PEAK REVERSE
MAXIMUM PEAK
CURRENT PER DIODE
REVERSE VOLTAGE
AT RATED VRRM
TJ = 15 °C
(µA)
(V)
TJ = 25 °C
TJ = 150 °C
APPLICATION DATA (SEE FIGURE 3)
CMAX
RMIN
VRMS MAXIMUM
RECOMMENDED
MAXIMUM
MINIMUM
AC SUPPLY
LOAD
SOURCE
VOLTAGE
CAPACITANCE RESISTANCE
(V)
(µF)
(Ω)
PART
NUMBER
DIN CODE
2KBB05
B20C1500
50
10
500
20
7000
0.3
2KBB10
B40C1500
100
10
500
40
5000
0.5
2KBB20
B80C1500
200
10
500
80
3300
0.8
2KBB40
B125C1500
400
10
500
125
1600
1.5
2KBB60
B250C1500
600
10
500
250
1200
2.5
2KBB80
B380C1500
800
10
500
380
800
3.0
2KBB100
B500C1500
1000
10
500
500
600
5.0
Note
• For PIN configuration - ~ ~ + add “R” to end of part number, e.g. 2KBB05R (see also dimensions for details - link at the end of datasheet)
Document Number: 93561
Revision: 17-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
1
2KBB Series
Single Phase
Rectifier Bridge, 1.9 A
Vishay High Power Products
FORWARD CONDUCTION
PARAMETER
SYMBOL
Maximum DC output current
IO
Maximum peak one cycle,
non-repetitive surge current
IFSM
TEST CONDITIONS
1.9
TC = 45 °C, capacitive load
1.5
Following any rated load
condition, and with rated
VRRM applied following surge
t = 6 ms
t = 5 ms
t = 10 ms
I2t
t = 8.3 ms
for fusing,
Maximum
initial TJ = TJ maximum
I2 t
I2√t
I2√t (1)
Maximum
capability for fusing
Maximum peak forward voltage per diode
Operating frequency range
VFM
VALUES
TC = 45 °C, resistive and inductive load
Rated VRRM applied following
surge, initial TJ = 150 °C
UNITS
A
50
A
52
12.5
11.3
A2 s
t = 10 ms
17.7
t = 8.3 ms
16.1
t = 0.1 to 10 ms, VRRM following surge = 0
177
A2√s
IO = 1.9 A (3.0 Apk)
1.1
V
40 to 2000
Hz
f
Note
(1) I2t for time t = I2√t • √t
x
x
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
Operating junction and storage temperature range
SYMBOL
VALUES
UNITS
TJ, TStg
- 40 to 150
°C
4
g
0.14
oz.
Approximate weight
1.8
Maximum Peak Output Current (A)
Average Output Current (A)
2.0
Resistive, inductive load
1.6
1.4
1.2
1.0
Capacitive load
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
120
140
160
60
50
40
30
20
10
0
10-2
10-1
1
10
Maximum Allowable Ambient Temperature (°C)
Equal Amplitude Pulse Train Duration (s)
Fig. 1 - Average (DC) Output Current vs.
Maximum Allowable Ambient Temperature
Fig. 2 - Maximum Non-Repetitive Surge Current vs.
Pulse Train Duration (f = 50 Hz)
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 93561
Revision: 17-Jun-08
2KBB Series
Single Phase
Rectifier Bridge, 1.9 A
10
600
CL = 200 µF
CL = 400 µF
Average Output Current (A)
RMS Supply Voltage (V)
Vishay High Power Products
500
CL = 600 µF
400
CL = 800 µF
300
CL = 1600 µF
CL = 1200 µF
200
CL = 3300 µF
CL = 5000 µF
100
CL = 7000 µF
5
Resistive, inductive load
2
Capacitive load
1
0.5
0
0
1
2
3
4
5
6
10-1
1
10
102
103
Minimum Required Value of Source Resistance (Ω)
Switch-On Surge Duration (s)
Fig. 3 - Minimum Required Source Resistance vs.
RMS Supply Voltage and Load Capacitance
Fig. 4 - Maximum Switch-On Surge Current vs.
Surge Duration
CIRCUIT CONFIGURATION
AC
(+)
AC
(-)
LINKS TO RELATED DOCUMENTS
Dimensions
Document Number: 93561
Revision: 17-Jun-08
http://www.vishay.com/doc?95328
For technical questions, contact: [email protected]
www.vishay.com
3
Outline Dimensions
Vishay Semiconductors
2KBB
DIMENSIONS in millimeters (inches)
15.50 (0.610)
14.50 (0.570)
-
~
+
7.00 (0.276)
6.00 (0.236)
~
18.00 (0.709)
17.00 (0.669)
20.00 (0.787)
(TYP.)
Ø 5.10 (0.201)
Ø 4.30 (0.169)
Ø 0.9 (0.035)
(TYP.)
Ø 0.7 (0.028)
Note
• For PIN configuration - ~ ~ + add “R” to end of part number
Document Number: 95328
Revision: 04-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000