2KBP Series Vishay High Power Products Single Phase Rectifier Bridge, 2 A FEATURES • Suitable for printed circuit board mounting RoHS COMPLIANT • Compact construction • High surge current capability • RoHS compliant D-44 DESCRIPTION A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment. PRODUCT SUMMARY IO 2A VRRM 50 to 1000 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS 2.0 A IO 50 Hz 60 60 Hz 63 50 Hz 18 60 Hz 16 A IFSM I2 t A2 s VRRM 50 to 1000 V TJ - 40 to 150 °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE (V) VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE (V) VRMS, MAXIMUM RECOMMENDED RMS SUPPLY VOLTAGE (V) 2KBP005 50 50 20 2KBP02 200 200 80 2KBP04 400 400 125 2KBP06 600 600 250 2KBP08 800 800 380 2KBP10 1000 1000 500 PART NUMBER Document Number: 93562 Revision: 17-Jun-08 For technical questions, contact: [email protected] www.vishay.com 1 2KBP Series Single Phase Rectifier Bridge, 2 A Vishay High Power Products FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current IO TEST CONDITIONS TA = 50 °C, resistive or inductive load 2.0 TA = 50 °C, capacitive load 1.8 t = 10 ms, 20 ms Maximum peak one cycle, non-repetitive surge current IFSM t = 8.3 ms, 16.7 ms t = 10 ms Maximum I2t capability for fusing t = 8.3 ms I2t t = 10 ms t = 8.3 ms UNITS A Following any rated load condition and with rated VRRM reapplied 60 A 63 18 100 % VRRM reapplied Initial TJ = TJ maximum No voltage reapplied 16 A2 s 26 23 I2√t t = 0.1 to 10 ms, no voltage reapplied 255 A2√s Maximum peak forward voltage per diode VFM IFM = 1 A, TJ = 25 °C 1.0 V Typical peak reverse leakage current per diode TJ = 25 °C, 100 % VRRM 10 µA IRM TJ = 150 °C, 100 % VRRM 1.0 mA 40 to 1000 Hz Maximum I2√t VALUES capability for fusing Operating frequency range f THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating junction and storage temperature range SYMBOL VALUES UNITS TJ, TStg - 40 to 150 °C 4 g 0.14 oz. Approximate weight Maximum Peak Output Current (A) Average Output Current (A) 2.2 2.0 Resistive, inductive load 1.8 1.6 1.4 1.2 Capacitive load 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 70 60 50 From any rated load condition 40 30 20 10 0 10-2 10-1 1 Maximum Allowable Ambient Temperature (°C) Pulse Train Duration (s) Fig. 1 - Ambient Temperature Ratings Fig. 2 - Non-Repetitive Surge Ratings www.vishay.com 2 For technical questions, contact: [email protected] 10 Document Number: 93562 Revision: 17-Jun-08 2KBP Series Single Phase Rectifier Bridge, 2 A Vishay High Power Products CIRCUIT CONFIGURATION IO + ~ ~ LINKS TO RELATED DOCUMENTS Dimensions Document Number: 93562 Revision: 17-Jun-08 http://www.vishay.com/doc?95329 For technical questions, contact: [email protected] www.vishay.com 3 Outline Dimensions Vishay Semiconductors D-44 DIMENSIONS in millimeters (inches) 22 (0.87) 15 (0.59) + 3.8 (0.15) ~ 17.5 (0.69) 3.8 (0.15) ~ 3.8 (0.15) 6.8 (0.27) Ø 0.75 (0.030) Document Number: 95329 Revision: 04-Jul-08 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000