SC9698P CD PLAY SOC(COMBINED SC9820 with CLOCK) DESCRIPTION SC9698P is a single chip of CD paly controller. This IC have CD play, DTS, TAPE, AUX, volume control, remote control, clock display and alarm functions. This IC include CD digital servo controller, signal processor, digital audio DAC output port, and headphone amplifier. It can drive LCD display directly with the least external components. FEATURES QFP-100-14x20-0.65 * CD player • Compatible with CD/CD-R/CD-RW • Support CD play/pause • Support CD previous/next track • Support CD fast forward/backward • CD single track, all tracks playing display • CD play display in random • CD play with scan • CD and tape synch record function ORDERING INFORMATION Device Package SC9698P QFP-100-14X20-0.65 APPLICATIONS * Radio function • Four frequency bands can be selectable (USA, GEN1/2, JAPAN) * Desk-top CD audio • Manual tuner • Automatic tuner • Pre-keep radio stations (FM: 10, AM/MW: 10, LW:5) * Tape function • TAPE display * AUX function • AUX function * Electron volume control • CD/radio/tape/AUX channel switch • Volume control and display • Preset POP, CLASS, ROCK three mode. • Support mute ON/OFF and display. • Support X-BASS swotcher and display. • Support ENCODER-VOLUME control. * Clock function • Clock display • Alarm clock • Snoozer • Sleep HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 1 of 17 SC9698P BLOCK DIAGRAM ABSOLUTE MAXIMUM RATINGS (Tamb=25°C) Characteristics Symbol Range Unit Supply Voltage VDD -0.5 ~ +5.5 V Input Voltage On Pins VIN -0.5 ~VDD + 0.5 V Operating Temperature Topr -20 ~ +75 °C ELECTRICAL CHARACTERISTICS (VDD=3.4~5.5V;VSS=0V;Tamb=-10~+60°C Characteristics Supply Voltage Supply Current Symbol Condition VDD IDD Min. Typ. Max. Unit 4.5 5.0 5.5 V 50 mA RFIN Input Signal VRFIN 5V(CD operating) 1 V Reference Voltage VIr 0.5VDD Common Mode DC Vcom 2.5 V Input Current Of Central Diode 1 ID1 0 9 µA Input Current Of Central Diode 2 ID2 0 9 µA Input Current Of Central Diode 3 ID3 0 9 µA Input Current Of Central Diode 4 ID4 0 9 µA Input Current Of Satellite Diode 1 IR1 0 4.5 µA Input Current Of Satellite Diode 2 IR2 0 4.5 µA PA Output Current (Low-Level) IOL(A) 10 mA PA Output Current(High-Level) IOH(A) 10 mA (To be continued) HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 2 of 17 SC9698P (Continued) Characteristics Symbol Condition Min. Typ. Max. Unit PB Output Current (Low-Level) IOL(B) 10 mA PB Output Current(High-Level) IOH(B) 10 mA PC Output Current (Low-Level) IOL(C) 10 mA PC Output Current(High-Level) IOH(C) 10 mA LDON Output Current Low-Level ILDON 0 Output Load Resistance DAC RL 5 Full-Scale DAC Output Voltage VFS 0.9 1.1 RAD Output Current IRAD 0 1 mA FOC Output Current IFOC 0 1 mA SLED Output Current ISLED 0 1 mA 0 5 MOTO Output Current IMOTO Low Level Output Voltage VOLDRIVE1 High Level Output Voltage VOHDRIVE1 RAD, FOC, SELD RAD, FOC, SELD 2 mA KΩ 1.2 10 mA 0.4 V VDD V 0 VDD0.4 V Moto Low Level Output Voltage VOLmoto 0 1.0 V Moto High Level Output Voltage VOHmoto VDD-1 VDD V RAD, FOC, SLED, MOTO Output 3-State Leakage Current DAC Total Harmonic Distortion Plus Noise DA Filter Attenuation OSC Frequency IZODRIVE RAD, FOC, SELD, -10 0 +10 µA 60 65 70 dB 0 to 19 kHz - - 0.001 dB 19 to 20 kHz 1 - 2 dB 24KHz 25 - - dB 25 to 35 KHz 40 - - dB 35 to 64 KHz 50 - - dB 64 to 68 KHz 31 - - dB 68 KHz 35 - - dB 69 to 88 KHz 40 - - dB MOTO (THD+N)/S Filter_DA Fsystem HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn 8.4672 REV:1.0 MHZ 2008.03.24 Page 3 of 17 SC9698P PIN CONFIGURATION HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 4 of 17 SC9698P PIN DESCRIPTION Pin no. Symbol I/O Descriptions 1 CROUT O 2 PA.7 I/O 3 PA.6 I/O 4 PA.5 I/O 5 PA.4 I/O MCU general purpose I/O ports, and the function is decided by 6 PA.3/ADIN3 I/O the program. 7 PA.2/ADIN2 I/O 8 PA.1/ADIN1 I/O 9 PA.0/ADIN0 I/O 10 PB.0/INT0 I/O 11 PB.1/INT1 I/O 12 PB.2/BUZZ I/O 13 PB.3 I/O MCU general purpose I/O ports, and the function is decided by 14 PB.4 I/O the program. 15 PB.5 I/O 16 PB.6 I/O 17 PB.7 I/O 18 PC.0 I/O 19 PC.1 I/O 20 PC.2 I/O 21 PC.3 I/O MCU general purpose I/O ports, and the function is decided by 22 PC.4 I/O the program. 23 PC.5 I/O 24 PC.6 I/O 25 PC.7 I/O 26 MVSS - MCU Ground pin. 27 MVDD - MCU power supply pin. 28 MRST I MCU reset pin. 29 MTEST I MCU test pin. 8.4672MHz crystal output pin. 30 MXI I MCU clock input pin. 31 MXO O MCU clock output pin. 32 COM0 O LCD COM0 port. 33 COM1 O LCD COM1 port. 34 COM2 O LCD COM2 port. 35 COM3 O LCD COM3 port. 36 SEG0 O LCD SEG0 port. 37 SEG1 O LCD SEG1 port. 38 SEG2 O LCD SEG2 port. 39 SEG3 O LCD SEG3 port. (To be continued) HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 5 of 17 SC9698P (Continued) Pin no. Symbol I/O Descriptions 40 SEG4 O LCD SEG4 port. 41 SEG5 O LCD SEG5 port. 42 SEG6 O LCD SEG6 port. 43 SEG7 O LCD SEG7 port. 44 SEG8 O LCD SEG8 port. 45 SEG9 O LCD SEG9 port. 46 SEG10 O LCD SEG10 port. 47 SEG11 O LCD SEG11 port. 48 SEG12 O LCD SEG12 port. 49 SEG13 O LCD SEG13 port. 50 SEG14 O LCD SEG14 port. 51 SEG15 O LCD SEG15 port. 52 SEG16 O LCD SEG16 port. 53 SEG17 O LCD SEG17 port. 54 SEG18 O LCD SEG18 port. 55 VSSP -- Grand 56 VPP - OTP program voltage 57 Vddo - DAC power supply. 58 Vsso - DAC ground. 59 VREF O 60 VOR O DAC right channel audio output pin. 61 FILTCR O DAC right channel filter capacitor. 62 FILTCL O DAC left channel filter capacitor. 63 VOL O DAC left channel audio output pin. 64 Sysclk I DAC system clock input pin. 65 RAD O Tracking drive output pin. 66 FOC O Focus drive output pin. 67 SLED O Sled motor driver output pin. 68 MOTO O Spindle motor driver output pin. 69 SDATAIN I DAC data input pin. 70 SCLKIN I DAC bit clock input pin. Internal reference voltage output pin, the typical voltage is 0.5VDD. 71 WCLKIN I DAC word clock input pin. 72 SDATAOUT O CD data output pin. 73 SCLKOUT O CD bit clock output pin. 74 WCLKOUT O CD word clock output pin. 75 VDD - CD power supply. 76 GND - CD ground, I/O port ground. 77 V2/SLED_SW 78 LDON I O Sled motor position monitor signal input, with pull-up resistor. Laser on signal output pin, with pull-up resistor. (To be continued) HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 6 of 17 SC9698P (Continued) Pin no. Symbol I/O Descriptions 79 CL16 O 16.9344M clock output pin. 80 Vssa1 - Servo module ADC analog ground. 81 NC - Not connect 82 NC - Not connect 83 Vdda1 - Servo module ADC analog power. 84 B I Central diode current signal input 1 85 A I Central diode current signal input 2 86 C I Central diode current signal input 3 87 D I Central diode current signal input 4 88 F I Satellite diode current signal input 1 89 E I Satellite diode current signal input 2 90 VCOM I DC voltage input pin. 91 VRH O ADC reference voltage output. 92 ISLICE O Data slice feed back current output. 93 HFIN I CD pick up signal input pin. 94 HFREF I CD pick up signal reference voltage. 95 IREF I Reference current output pin. 96 Vssa2 - Ground of HF and PLL 97 Vdda2 - Power of HF and PLL 98 NC - Not connect 99 NC - Not connect 100 CRIN I 8.4672MHz crystal input pin. HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 7 of 17 SC9698P FUNCTION DESCRIPTION 1. LCD True table: COM1(Pin 97) COM2(Pin 98) COM3(Pin 99) COM4(Pin 100) SEG1 1 MUTE .. SYNC REC REMA IN SEG2 2 AUX CLASSIC ROCK POP SEG3 3 TAPE LW TIMER SNOOZE SEG4 4 1f 1e 1d 1c SEG5 5 STEREO AM PM 5 SEG6 6 3f 3e 3d 3c SEG7 7 RANDOM 3a 3g 3b SEG8 8 4f 4e 4d 4c SEG9 9 : 4a 4g 4b SEG10 10 5f 5e 5d 5c SEG11 11 . 5a 5g 5b SEG12 12 6f 6e 6d 6c SEG13 13 MEMORY 6a 6g 6b SEG14 14 TUNER FM KHz MHz SEG15 15 CD MW REPEAT SLEEP SEG16 16 INTRO 1a 1g 1b SEG17 17 2f 2e 2d 2c SEG18 18 X-BASS 2a 2g 2b 2. JUMPER A/D Value Pickup Mechanism Clock & Timer 0.00~0.63V SONY KSS-213C Enable 0.63~1.25V SONY KSS-213C Disable 1.25~1.88V THOMSON TCP-11TK Enable 1.88~2.50V THOMSON TCP-11TK Disable 2.50~3.12V SANYO DA11 Enable 3.12~3.75V SANYO DA11 Disable 3.75~4.38V SAMSUNG V75 Disable 4.38~5.00V SAMSUNG V75 Enable HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 8 of 17 SC9698P 3. KEYBOARD 1. Fran panel keyboard form: KeyAD1(P3-1:26pin) KeyAD2(P3-2:27pin) KeyAD3(P3-3:28pin) POWER PLAY/PAUSE MUTE (0.00V) VOL-UP STOP/BAND INTRO (0.63V) VOL-DOWN UP/FF RANDOM (1.25V) DOWN/REW MEMORY/CLOCK ADJ (1.88V) REPEAT/M-UP SLEEP/TIMER (2.50V) CD OP/CL SNOOZE (3.13V) TUNER DISPLAY Preset EQ (3.75V) TAPE AUX X-BASS (4.38V) FUNCTIN4(CD, TUNER,TAPE, AUX) FUNCTION4 (CD, TUNER, TAPE) 2. Remote controller keyboard form: T0 T1 T2 T3 K0 PLAY/PAUSE STOP/BAND UP/FF DOWN/REW K1 REPEAT/M-UP INTRO RANDOM MEMORY/CLOCK ADDJ K2 SNOOZE TIMER SLEEP DISPLAY K3 POWER Presset EQ X-BASS OVER K4 1 2 3 4 K5 5 6 7 8 K6 9 0 VOL-UP VOL-DOWN FUNCTION4(CD, FUNCTION4(CD,TUN FUNCTION4(CD, TUNER, TAPE, AUX) ER,TAPE) TUNER) K7 MUTE 4. RADIO MODE 1. Receive band: AREA CODE AREA0,1 GEN2 00 JAPAN 01 GEN1 10 USA BAND 11 FREQUENCY RANCE[Hz] STEP[Hz] 87.50-108.00M 50K MW 522-1620K 9K 9K +450K 100K,1CH 25K -10.7M FM 76.0-90.0M,TV1-3 50K/3.125K IF FM +10.7M/1.3375M AM 522-1629K 9K 9K +450K FM 87.50-108.00M 50K 50K/3.15K +10.7M/1.3375M MW 522-1620K 9K 9K LW 144-281K 1K 1K FM 87.5-108.0M 100K 50K/3.125K +10.7M/1.3375M AM 520-1710K 10K 10K +450K HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn FREQ REF[Hz] +450K REV:1.0 2008.03.24 Page 9 of 17 SC9698P 2. PLL SC9257 pin descriptions Pin no. Pin name I/O 3 PERIOD I 4 CLOCK I 5 DATA I/O SIO(data line) 6 OT1 O FM band out Open=FM, L=other 7 OT2 O MW band out Open=MW, L=other 8 OT3 O LW band out Open=LW, L=other 9 OT4 O Non connection 10 I/O5 I Normal or 1/8 IF input select *1 11 I/O6 I 16 I/O9/IFIN2 I 17 I/O8/IFIN1 I 18 I/O7/SCIN I Descriptions Note PLL Chip select SIO clock Area select 0=normal IF 1=1/8 IF A0, 1=00: GEN2, 01:JAPAN, 10:GEN1, 11:USA FM IF 1/16 FM osc select it is disable when area is JAPAN *1 1=1/16 FM osc 3. Radio key functions 1 TUNER Press this key enter radio mode. 2 BAND This key used to switch frequency bands: FM→AM→LW(selectable)→FM 3) REW press the key, manual search the radio station press the key continuance, auto search the radio station until find the stations. 4 FF press the key, manual search the radio station press the key continuance, auto search the radio station until find the stations. 5 MEMORY UP Take out the memory status: 6) MEMORY First press the MEMORY key, then press the number directly or select the station by the MEMORY UP key, it is keep in when press the MEMORY key again. 4. Radio display 1) FM BAND HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 10 of 17 SC9698P 2) AM BAND 3) Display the memory status 4) Display saving status 5. Tape mode 1. tape functions 1) TAPE Press the key enter TAPE mode. 2. Display 6. CD mode 1. CD key functions 1) CD press this key enter CD mode. 2) PLAY/PAUSE Play/pause key. HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 11 of 17 SC9698P 3) STOP Stop key. 4) RANDOM Play with random (in the RANDOM station, press REW key invalible) 5) REW Press the key: jump to the previous track. Reach the previous track, if the current track is the last one, then reach the first track. Press the key continuance: fast backward Fast backward until release the key, if it is reach the first track, then play the tracks normally. 6) FF Press the key: reach the next track Reach the next track , if the current track is the last one, then reach the first track. Press the key continuance: fast forward Fast forward until the key released, if it is reach the last one, then paly tracks normally. 7) REPEAT 8) PROGRAM Press this key enter program station (in the STOP station) Press the REW/FF key select tracks, the program number increased when memory one track, the maximum tracks is 20. After program, the system begin playing tracks. It will quit program status if on operation at 8 seconds, but the tracks also remained. If press the STOP key in program status, clear all program tracks, and quit the program status. 9) INTRO This key used to switch the scan and play functions. 2. CD display 1) STOP status, display total tracks number and total time 2) PLAY status display HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 12 of 17 SC9698P 3) PAUSE status display 4 REW/FF status display 5) RANDOM status display 6) REPAEAT ALL display (the REPEAT symbol blinking at REPEAT ONE status) 7) Program status display HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 13 of 17 SC9698P 8) Programmable status display 7. Volume mode 1. Volume key description 1) VOLUME+/Volume increment or minishreduce. 2) MUTE Mute ON/OFF control. 3) EQ Switch the pre-set mode 2. volume display 1) VOLUME 8. other function 1. Descriptions 1) CLOCK Press the DISPLAY key until reach the time mode, press the key MEMORY continuance, it enter time setting station, then press the UP/DOWN key adjust the time. 2) SLEEP Press the SLEEP key, it enter sleep station, press the key again, set the sleep time (90~10 minutes). When setting the sleep time, the SLEEP symbol blink in the LCD , and after timer turn on, the SLEEP symbol displayed in the LCD, press the SLEEP key again cancel the timer. 3) TIMER Start by the setting time(alarm). Adjust the time. 4) STAND BY/ON Standby /ON switch HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 14 of 17 SC9698P 2. Display 1) Standby status 2) TAPE 3) TIMER HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 15 of 17 SC9698P TYPICAL APPLICATION CIRCUIT IF To MCU SC9257 FMIN AMIN FM AM LW AREA SELECT ST/MO FM IF SELECT AM IF SELECT HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 16 of 17 SC9698P PACKAGE OUTLINE 12.35 16.3±0.4 17.9±0.4 Unit: mm 14.0±0.2 QFP-100-14x20-0.65 HANDLING MOS DEVICES: Electrostatic charges can exist in many things. All of our MOS devices are internally protected against electrostatic discharge but they can be damaged if the following precautions are not taken: • Persons at a work bench should be earthed via a wrist strap. • Equipment cases should be earthed. • All tools used during assembly, including soldering tools and solder baths, must be earthed. • MOS devices should be packed for dispatch in antistatic/conductive containers. Note: Silan reserves the right to make changes without notice in this specification for the improvement of the design and performance. Silan will supply the best possible product for customers. HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2008.03.24 Page 17 of 17