Fiber Optic Tool Kits GCB1000, GCB2000 and GCB3000 Fiber Optic CleanBlast® Cleaning Systems for Fiber Optic Connectors nFaster, More Effective and Less Costly than using Swabs or other Cleaning Methods nExcellent at Removing–Instead of Spreading–Debris and Oils around the Ferrule Surface nComplete Selection of Tips Available nCost per Cleaning Cycle: One Cent! nRugged Watertight Case nOptional Add-Ons for Advanced Optical Testing of MIL-PRF-29504 Termini with Quick Capture Analog Probe (6-4 pin Converter) and FiberChek Software for Quick Capture Capability on Your PC. Glenair’s CleanBlast® Systems Provide Rapid, Controlled Cleaning and Removal of Contamination from Fiber Optic End-Faces The CleanBlast® system creates a laminar flow of a highly filtered gas across the surface of the fiber. A solvent is then introduced and atomized to create a cleaning mist that leaves the fiber conrtamination free (MSDS data sheet is available), ensuring that your cable is serving at its optimal performance. Complete CleanBlast® Inspection System CleanBlast® Basic Kit GCB2000 GCB1000-U Basic Part Number Includes: • Portable CleanBlast® with LCD Monitor and Inspection Probe in Ruggedized Case Laboratory Bench Model Basic Part Number Includes: • Portable CleanBlast® • Glenair Swabs GCB3000-M Basic Part Number Includes: • Universal 2.5 mm Bulkhead Cleaning Tip • Glenair Swabs Optional Digital Mounting Monitor with Inspection Probe and 2.5 mm & 1.25 mm Patch Cord Inspection Tips • 2.5 mm and 1.25 mm Patch Cord Inspection Tips • Universal 2.5 mm Bulkhead Cleaning Tip • Glenair Swabs Optional Quick Capture Analog Probe with 6 Pin to 4 Pin Converter (Omit for None) © 2006 Glenair, Inc. Fiber check software can be downloaded from: http://www.westoverfiber.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] M-6 www.glenair.com Fiber Optic Tool Kits GCB1000, GCB2000 and GCB3000 Fiber Optic CleanBlast® Cleaning Systems for Fiber Optic Connectors GCB1000 and GCB2000 SPECIFICATIONS GCB3000 SPECIFICATIONS Power Requirements 110 VAC-220 VAC, 2 amp Power Requirements 110 VAC-220 VAC, 2 amp Dimensions 16”L x 13”W x 7”D Dimensions 8”L x 9”W x 7”D Weight 21 lb Weight 12 lb Air Source 40 psi Internal Compressor Air Source Cleaning Cycle Time 5 seconds Certification CE Approved External, compressed air or nitrogen; regulated between 60 – 250 psi Cleaning Cycle Time .8 seconds Certification CE Approved Fiber Chek Software Fiber Optic Analysis Program Fiber Chek is an integrated hardware/software package engineered with the single purpose of critically and consistently grading fiber end-faces. Works hand in hand with the Quick Capture Analog Probe for visual inspection, taking pictures and testing fibers on your PC. • Automatic debris and defect detection, including fine scratches • Measures epoxy ring for out-of-tolerance conditions • Inspection results, including image data, can be printed or archived • Utilizes industry standards or user defined threshold settings © 2006 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] M-7 www.glenair.com