CB Series Banding Adapter for Shielding and Overmolding Black zinc plated aluminum alloy adapter fits all CB plugs and receptacles with M14 x 1 threads. Attach adapter to connector and fill with potting compound for wire protection and waterproofing. Attach shield and cable strength members to adapter with Glenair tool 600-061 using 3mm stainless steel BAND-IT® straps. Maximum weight 7 grams. Description Part Number CBBSBI-T Banding Adapter 30.2 MAX 11.9 1.5 13.9 MAX 18.3 MAX 15.6 MAX 1.5 BAND-IT® Shield Termination System Fast, cost-effective shield termination. Attach cable shields to Series 80 connectors or backshells with BAND-IT® stainless steel straps. The BAND-IT® system offers fast termination and the flexibility to handle a wide range of parts with just one band size. Approved for aerospace and defense, these straps have successfully passed rigorous shock, vibration and environmental testing. 1 1 2 Micro Band Installation Tool. Use with 3.05 mm wide bands. 172 mm length, 0.6 Kg. Figure Description 1 Micro Band Installation Tool Figure Length in. 2 8.125 206.38 2 Micro Band, 3.05 mm wide. Available flat or pre-coiled. Stainless steel. Part Number 600-061 Part Number Flat Pre-Coiled 600-057 600-057-1 Accommodates Maximum Diameter 22.3 Contact Glenair or visit our website (glenair.com) to view our complete line of BAND-IT® products, including pneumatic tools for high volume production and calibration kits. 206.4 ± 0.8 3.05 REF 4.95 REF © 2007 Glenair, Inc. TAIL LENGTH INDICATOR MARK All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 21 E-Mail: sales@glenair.com Connectors CB Series “PogoPin” Connectors CB Series Connectors CB Series “PogoPin” Connectors Heat Shrinkable Boots Protect Your Cable Harness with semi-rigid heat-shrinkable boots. These easy-to-use boots provide excellent electrical, mechanical and environmental protection. Made from flame-retardant elastomeric material, these adhesive-lined boots are resistant to high temperature and chemicals. Heating the boot causes the boot to shrink onto the connector and cable . An adhesive lining bonds the boot to the connector and cable and fills small gaps for a complete seal. Choose straight cable exit or right angle exit. Style 1 1 Style 2 Straight boot, adhesive-lined. Fits all CB Series PogoPin connectors. SPECIFICATIONS Standard Material Fluid resistant crosslinked elastomer per VG95343 Part 6 Low Toxicity Material Fluid resistant crosslinked elastomer per NAVSEA 5617649 Adhesive Polyamide hot melt Min. Shrink Temperature Installation Temperature Temperature Range Solvent Resistance +135°C Figure 1 2 Configuration Straight Right Angle Right angle boot for 90° cable exit. Fits all CB Series PogoPin Connectors. 2 Fluid Resistant Elastomer 809S060-3 809A060-3 Low-Smoke Zero Halogen 809S060-3H 809A060-3H Straight Boot Dimensions 38.1 REF ø23.5 MIN 1.5 REF ø10.4 MAX ø 5.6 MAX +175°C. BEFORE HEAT SHRINKING -55°C to +105°C Saline – Excellent Hydraulic Fluid – Very Good Lubricating Oil – Very Good Aviation Fuel – Very Good Gasoline – Very Good Diesel – Fair De-Icing Fluid – Excellent Flammability Self-extinguishing Dielectric Strength 480 V/mil © 2007 Glenair, Inc. AFTER HEAT SHRINKING Right Angle Boot Dimensions ø20.3 REF 1.5 REF ø 5.6 MAX ø23.5 MIN ø22.9 REF BEFORE HEAT SHRINKING AFTER HEAT SHRINKING ø10.4 MAX All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 22 Rev. 05-APR-2007 E-Mail: sales@glenair.com PG Thread Adapter CB Series PG thread adapters fit all CB Series connectors with M14 x 1 accessory threads. These adapters accept all standard PG 7 liquid tight cordgrips. Style 2 Style 1 1 PG Adapter PG Adapter with Flexible Cordgrip PG 7 adapter fits all CB Series connectors with M14 x 1 accessory thread. Aluminum alloy with black zinc plating. Maximum weight 6 grams. Figure Configuration 1 2 Adapter Only Adapter and Cordgrip 2 PG 7 adapter with liquid tight flexible cordgrip. Adapter fits all CB Series connectors with M14 x 1 accessory thread. Aluminum alloy with black zinc plating. Cordgrip is 6/6 nylon with thermoplastic elastomeric sealing gland. Fits cable diameter 3.5mm to 7mm Supplied with nitrile O-ring for adaper-to-cordgrip seal. Maximum weight 15 grams. Part Number CBBSPG7-T CBBSPG7CD-T 26.0 MAX 18.3 MAX PG 7 FEM THD M14. x 1 FEM THD 86.4 MAX Adapter Flexible PG Ad t with ith Fl ibl Cordgrip, with CB Plug and Jacketed Cable 18.3 MAX 19.1 MAX M14. x 1 FEM THD Jam Nut Tightening Tool Nickel-plated steel tightening tool fits jam nut receptacles. Fits 3/8 inch drive torque wrench. 18.5mm diameter, 25.4 mm length, 23 grams. Part Number 600-146-04 Recommended installation torque: 6-7 N-m. © 2007 Glenair, Inc. All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 23 Rev. 05-APR-2007 E-Mail: sales@glenair.com Connectors CB Series “PogoPin” Connectors CB Series Connectors CB Series “PogoPin” Connectors Shielded Backshell with Flexible Rubber Bushing Black zinc plated aluminum alloy backshell fits CB Series connectors with M14 x 1 threads. Black nitrile bushing provides flexible cable strain relief and cable sealing. Cut tapered bushing to fit varying cable diameters. Supplied unassembled with two O-rings and aluminum alloy ground ring. Maximum weight 15 grams. Part Number CBBS-E1 Ø6 Ø7 Ø5 Ø 18.0 43 MAX. 90 MAX. O-RING Connector shown for reference only. WASHER GROUND RING RUBBER BUSHING FRONT ADAPTER REAR ADAPTER Dummy Receptacle for CB Series Plugs Attach dummy receptacle to panel or chassis with M4 screw (not supplied). Aluminum alloy, black zinc plated. Resilient gasket holds plug in place. Maximum weight 7 grams. 15.7 MAX. Part Number CBCAP-Z6 +0.2 4.2 -0 23.0 MAX. GASKET © 2007 Glenair, Inc. All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 24 E-Mail: sales@glenair.com CB Series Rubber Protective Cover for CB Series Receptacles Black nitrile rubber cover fits all CB Series receptacles including shrouded versions. Tight friction fit prevents water ingress to unmated connector. Supplied with nylon rope, ring terminal and ferrule. Terminal and ferrule are supplied unassembled. Attach to panel with ring terminal, or attach to cable with crimp ferrule. Use standard crimp tools for installation. Maximum weight 5 grams. Part Number VG96934Z4 14.5±0.5 6±0.5 +0 Ø 3 - 0.5 11.5 +0,1 O 10.5 0 O 13 O 15.6 O 19.5±0,5 CRIMP FERRULE FOR CABLE ATTACHMENT (SUPPLIED LOOSE) RING TERMINAL FOR PANEL ATTACHMENT (SUPPLIED LOOSE) 3.5 MIN 23.0 MIN Protective Cover for CB Series Plugs Watertight aluminum alloy cover protects CB Series plugs from damage when unmated. Black zinc plated. O-ring holds cover in place. Supplied with nylon rope, with ring terminal or loop. Attach with ring terminal, or attach to cable with loop. Maximum weight 7 grams. Figure Configuration 1 2 25 mm Loop Ring Terminal Part Number CBA10Z6 CBA10Z3 23.0 MAX. 1 + 10 100 - 0 LOOP FOR CABLE ATTACHMENT 15.7 MAX. +5 80 - 0 2 © 2007 Glenair, Inc. Ø 25 +0 Ø 3 - 0.5 RING TERMINAL FOR PANEL ATTACHMENT All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 25 E-Mail: sales@glenair.com Connectors CB Series “PogoPin” Connectors