AMPHENOL 10-069522-19P

Amphenol QWL Series
Cylindrical Connectors
®
12-053-4
Amphenol
TABLE OF CONTENTS
Page
Description............................................................... Page
QWL Series ......................................................... 2
QWL - accessories
10-130380 cable sealing adapter
(with clamp bars) .......................................... 43, 44
Description
Amphenol® Heavy Duty Cylindrical Connectors
QWL
the environmental connector ............................... 3
QWL - accessories
10-10133X cable sealing adapters ................ 45-48
QWL
how to order ..................................................... 4, 5
QWL - accessories
10-113637 cable sealing adapter (with woven
strain relief) ....................................................49-52
QWL
10-1070 wall mount receptacle ............................ 6
QWL - accessories
adapter, cable clamp .......................................... 53
QWL
10-1071 cable connecting plug ............................ 7
QWL - accessories
adapter, cable clamp, sealing plugs .............. 54-56
QWL
10-1072 box mount receptacle ............................ 8
QWL - accessories
protection caps ............................................. 57, 58
QWL
10-1073 jam nut receptacle (wall mount) ............. 9
QWL - accessories
flange gasket, grip banding clamp ...................... 59
QWL
10-1074 thru bulkhead receptacle ..................... 10
QWL
crimp contacts .................................................... 60
QWL
10-1076 straight plug ......................................... 11
QWL
solder contacts ................................................... 61
QWL
10-1077 flange mount plug ................................ 12
QWL
application tools (crimp type) ...............................62
QWL
10-1079 jam nut receptacle (box mount) ........... 13
QWL
thermocouple contacts
and arrangements ......................................... 63-69
QWL
insert arrangements
selection guide .............................................. 14-16
Other Heavy Duty Connectors Offered by
Amphenol .............................................................70
QWL
alternate positioning ........................................... 17
Sales Office Listing
QWL
contact insert arrangements ......................... 18-29
QWL
special contact insert arrangements ............. 30-40
For additional information concerning the
Amphenol® QWL Series Cylindrical Connector, or if
there are special application requirements, contact
your local sales office or
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave.
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5351
www.amphenol-aerospace.com
(Most Amphenol catalogs can be viewed, printed
and down-loaded from the website)
QWL - accessories
cabling information ...................................... 41, 42
Amphenol Aerospace operates Quality Systems
that are Certified to ISO-9001 and AS-9100 by third
party Registrars.
1
®
Amphenol Heavy Duty
Cylindrical Connectors
QWL Series
Amphenol® QWL Series Connectors are tailor made for compact,
heavy duty industrial use.
The outstanding performance of this
series makes it well suited for shipboard installations and ground support power distribution applications
where physical strength and dependability are key requirements.
wall mount receptacle
thru bulkhead receptacle
straight plug
cable connecting plug
The QWL Series are a versatile,
economical alternative to military
qualified designs.
Equivalent MS shell sizes and insert
arrangements offer compatibility with
all standard cable types. MIL-C-22992
environmental connector requirements (see page 1) are used as a performance criteria base for this series
to assure reliability under the most
severe conditions.
The design features of this connector series provide:
• Exceptional Service - high
strength aluminum shells with Alumilite 225* hard anodic finish and
shock resistant resilient inserts.
• Foolproof Operation - rugged
double stub coupling threads, left
hand accessory threads and simple single keyway mating.
box mount receptacle
flange mount plug
• Versatility - both MS and custom
insert patterns available for a wide
variety of multiconductor cables.
A complete line of accessories is
available for use with QWL Series
connectors, including cable sealing
and clamp adapters, protective covers, flange gaskets and banding
clamps.
jam nut receptacle
(wall mount)
jam nut receptacle
(box mount)
2
* Registered trademark of Aluminum
Company of America
QWL
the environmental connector
• HIGH CURRENT CAPACITY for power distribution network and inputs to
large equipment
• RUGGED CONSTRUCTION dictated by the working environment, high
strength aluminum shells with Alumilite 225* hard anodic finish, shock resistant resilient inserts, gaskets or “O” rings at appropriate surfaces for perfect
weather tight connections.
• SERVICEABILITY AND FOOL-PROOF OPERATION with fast coupling, easily
maintained double stub threads, left hand accessory threads and single
keyway mating.
• VERSATILITY - both MS and custom insert patterns available to accommodate a wide variety of multi conductor cables.
CONDITION
CONFIGURATION
THERMAL
SHOCK
UNMATED
MOISTURE
RESISTANCE
(Cable mounted
connectors)
MATED
DURABILITY
MATED
SALT SPRAY
(Corrosion)
UNMATED
VIBRATION
MATED
DESCRIPTION
REFERENCE
Five complete one hour temperature
MIL-STD-1344
cycles of –55°C to +125°C
method 1003
Ten complete 24 hour cycles of
MIL-STD-202
+25°C to +65°C temperature at 90%
method 106
test condition
to 98% humidity
500 complete mating/unmating cycles
MIL-C-22992
48 hour exposure to atomized 5%
MIL-STD-1344
saline solution at +35°C
method 1001
10 to 55 Hz, .06 inch total excursion
MIL-STD-1344
in 1 minute cycles for 6 hours
method 2005
55 to 2000 Hz, 10G peak amplitude
sweep
HIGH IMPACT
MATED
Nine hammer blows from 1, 3 and
MIL-STD-202
5 feet, three each in three axes
method 207
on mounting panel
FLUID
IMMERSION
UNMATED
WATER
IMMERSION
MATED
20 hours immersion in hydraulic
MIL-C-22992
fluid and lubricating oil
4 hours immersion at 1 atmosphere
MIL-C-22992
pressure differential
* Registered trademark of Aluminum
Company of America
3
QWL
how to order
QWL heavy duty cylindrical connectors are ordered by Amphenol® part number only. To
illustrate the ordering procedure, part number 10-107628-5P is shown as follows:
PART NUMBER
10 - 107 6 28-5 P
1
2 3 4
5
See code below:
1. Base Number Prefix - used to define contact type and finish.
10- Solder type contacts, silver plated (Standard)
75- Crimp type contacts, silver plated
81- Crimp type contacts, plated .0001 gold over silver
82- Crimp type contacts for MIL-C-13777 cable, silver plated
83- Crimp type contacts for MIL-C-13777 cable, plated .0001 gold over silver
85- Crimp type contacts plated .00005 gold over silver
2. Base Number - QWL Series Heavy Duty Cylindrical Connector.
3.
0
1
2
3
4
6
7
9
Shell Style designates wall mount receptacle
designates cable connecting plug
designates box mount receptacle
designates jam nut receptacle with rear accessory threads (wall mount)
designates thru bulkhead receptacle
designates straight plug
designates flange mount plug
designates jam nut receptacle (box mount)
4. Shell Size/Insert Arrangement - Amphenol® QWL connectors are available in equivalent MS shell
sizes with all current MS insert arrangements as well as a large selection of special arrangements for
power and signal circuits. Select the required insert arrangement number from those shown on pages
18-40.
5. Contact Type/Alternate Insert Rotations - P for pin, S for socket. When an alternate position of
the connector insert is required to prevent cross mating of connectors, a different letter (other than P or
S) is used. Select from the table below the Amphenol® letter which indicates both type of contact, and
insert rotation desired. Refer to page 17 for alternate insert rotations.
PIN CONTACTS
MS
AMPHENOL®
LETTERS
LETTER
P
P (normal)
PW
G
PX
I
PY
K
PZ
M
SOCKET CONTACTS
MS
AMPHENOL®
LETTERS
LETTER
S
S (normal)
SW
H
SX
J
SY
L
SZ
N
4
QWL
how to order, cont.
ACCESSORIES
Cable Sealing Adapters - these are the basic connector accessories which provide moisture proofing and cable strain
relief. Selection is made on the basis of accessory style, shell size and cable dimensions. To illustrate the ordering procedure, part number 10-101335-361 is shown as follows:
PART NUMBER
10 - 101335
1
- 361
2
See code below:
1. Accessory Base Number - refer to pages 41 through 52 for descriptions and dimensional data.10-101332 designates
short barrel length with woven strain relief grip
10-101333
designates short barrel length without strain relief
10-101334
designates short barrel length with woven strain relief grip and attaching ring for protection cap with bead
chain
10-101335
designates short barrel length with attaching ring for protection cap with bead chain
10-101380
designates short barrel length with attaching ring for protection cap with bead chain and clamp type strain
relief bars
10-113637
designates long barrel length with woven strain relief and attaching ring for protection cap with bead chain
2. Part Number – represents connector shell size and range of cable diameters accommodated by the sealing adapter.
Refer to the page listed below to determine the part number required for the accessory style being used:
Accessory Series
10-10133X
10-130380
10-113637
Page
46 - 48
44
50 - 52
Cable Clamp 10-749XX-( ) and Adapter 10-113196-XX
Connectors which require weatherproofing on open wire cables are provided with a moisture seal by this cable clamp, a
modification of the MS3057B design. A rubber grommet with holes for individual wires is used in place of the sleeve. As the
assembly is tightened, the grommet is compressed around each wire, sealing out moisture.
Order this clamp by the part number listed on page 53 to accommodate the connector being used. Suffix the part number
with the connector insert arrangement number.
To attach the cable clamp to the left hand accessory threads of QWL connectors, Adapter 10-113196-XX is needed. Finish
is non-conductive Alumilite. Order by adapter part number listed on page 53 to accommodate the connector shell size
being used. For a moisture proof seal, unused grommet holes must be filled with the appropriate size sealing plug or sealing rod selected from the table on page 53. Sealing plug or sealing rods must be ordered separately.
M85049/1 Cable Clamp and Adapter 10-113138-XX - order this clamp by the M85049( )C part number listed on page 55
to accommodate the cable type being used. To attach the cable clamp to the left hand accessory threads of QWL connectors, Adapter 10-113138-XX is needed. Order by adapter part number listed on page 55 to accommodate the connector
shell size being used. Standard finish on the clamp is olive drab, cadmium plate. Adapter finish is non-conductive Alumilite.
MS3420-( )A sleeve, to facilitate sealing on smaller diameter cables, must be ordered separately. MS3420-( )A sleeves
may be nested to accommodate smaller cable diameters.
Plug Protection Caps 10-101046-( )
designates plug cover with chain, Alumilite 225 finish
10-101531-( )
designates plug cover with chain and eyelet end, Alumilite 225 finish
Order these plug covers by the part number listed on page 57 for the appropriate connector shell size.
Receptacle Protection Caps 10-101063-( )
designates receptacle cover with chain, Alumilite 225 finish
10-101048-( )
designates receptacle cover with chain and eyelet, Alumilite 225 finish
Order these receptacle covers by the part number listed on page 57 for the appropriate connector shell size.
Flange Gasket 10-36675-( )
for operating temperature range –67° to +275°F
10-40450-( )
for operating temperature range 0° to +257°F
Order by part number listed on page 59 for appropriate connector shell size.
10-183249 Grip Banding Clamp - order this stainless steel clamp by part number listed on page 59 to accommodate
cable diameter being used.
5
QWL
10-1070XX
wall mount receptacle
K
Z
S
R
S
A
THREAD
W
M
R
T
4 HOLES
B
V
LEFT HAND
All dimensions for reference only.
A
Thread
Class 2A
B
Min
Full
Thread
K
±.015
M
+.016
–.000
R
±.005
S
±.020
T
Dia
+.004
–.003
V
Thread
Class 2A-LH
W
±.010
Z
Max
Part
Number*
Shell
Size
10-107010
10S
.6250-0.05P-0.1L-DS
.391
.704
.562
.719
1.000
.150
.500-28UNEF
.400
.450
10-107012
12S
.7500-0.1P-0.2L-DS
.391
.704
.562
.812
1.094
.150
.625-24UNEF
.400
.450
10-107013
12
.7500-0.1P-0.2L-DS
.625
.891
.750
.812
1.094
.150
.625-24UNEF
.588
.700
10-107014
14S
.8750-0.1P-0.2L-DS
.391
.704
.562
.906
1.188
.150
.750-20UNEF
.400
.450
10-107015
14
.8750-0.1P-0.2L-DS
.625
.891
.750
.906
1.188
.150
.750-20UNEF
.588
.700
10-107016
16S
1.0000-0.1P-0.2L-DS
.391
.704
.562
.969
1.281
.150
.875-20UNEF
.400
.450
10-107017
16
1.0000-0.1P-0.2L-DS
.625
.891
.750
.969
1.281
.150
.875-20UNEF
.588
.700
10-107018
18
1.1250-0.1P-0.2L-DS
.625
.906
.750
1.062
1.375
.177
1.000-20UNEF
.573
.686
10-107020
20
1.2500-0.1P-0.2L-DS
.625
.906
.750
1.156
1.500
.177
1.125-18NEF
.573
.686
10-107022
22
1.3750-0.1P-0.2L-DS
.625
.906
.750
1.250
1.625
.177
1.250-18NEF
.573
.686
10-107024
24
1.5000-0.1P-0.2L-DS
.625
.968
.812
1.375
1.750
.177
1.375-18NEF
.573
.624
10-107028
28
1.7500-0.1P-0.2L-DS
.625
.968
.812
1.562
2.000
.177
1.625-18NEF
.573
.624
10-107032
32
2.0000-0.1P-0.2L-DS
.625
1.031
.875
1.750
2.250
.209
1.875-16N
.573
.561
10-107036
36
2.2500-0.1P-0.2L-DS
.625
1.031
.875
1.938
2.500
.209
2.0625-16N
.573
.561
10-107040
40
2.5000-0.1P-0.2L-DS
.625
1.031
.875
2.188
2.750
.209
2.3125-16N
.573
.561
10-107044
44
2.7500-0.1P-0.2L-DS
.625
1.031
.875
2.375
3.000
.209
2.625-16UN
.698
.801
*For complete order number see page 4
6
QWL
10-1071XX
cable connecting plug
S
K
M
A
Thread
Z
W
S
V
LEFT HAND
All dimensions for reference only.
K
±.015
M
+.016
–.000
S
±.020
V
Thread
Class 2A-LH
W
±.010
Z
Max
.6250-0.05P-0.1L-DS
.704
.453
.750
.500-28UNEF
.400
.450
.7500-0.1P-0.2L-DS
.704
.453
.875
.625-24UNEF
.400
.450
12
.7500-0.1P-0.2L-DS
.891
.641
.875
.625-24UNEF
.588
.701
10-107114
14S
.8750-0.1P-0.2L-DS
.704
.453
1.000
.750-20UNEF
.400
.450
10-107115
14
.8750-0.1P-0.2L-DS
.891
.641
1.000
.750-20UNEF
.588
.701
10-107116
16S
1.0000-0.1P-0.2L-DS
.704
.453
1.094
.875-20UNEF
.400
.450
10-107117
16
1.0000-0.1P-0.2L-DS
.891
.641
1.094
.875-20UNEF
.588
.701
10-107118
18
1.1250-0.1P-0.2L-DS
.906
.656
1.281
1.000-20UNEF
.573
.686
10-107120
20
1.2500-0.1P-0.2L-DS
.906
.656
1.375
1.125-18UNEF
.573
.686
10-107122
22
1.3750-0.1P-0.2L-DS
.906
.656
1.500
1.250-18UNEF
.573
.686
10-107124
24
1.5000-0.1P-0.2L-DS
.968
.719
1.625
1.375-18UNEF
.573
.624
10-107128
28
1.7500-0.1P-0.2L-DS
.968
.719
1.875
1.625-18UNEF
.573
.624
10-107132
32
2.0000-0.1P-0.2L-DS
1.031
.656
2.125
1.875-16UN
.573
.561
10-107136
36
2.2500-0.1P-0.2L-DS
1.031
.656
2.375
2.0625-16UNS
.573
.561
10-107140
40
2.5000-0.1P-0.2L-DS
1.031
.656
2.625
2.3125-16UNS
.573
.561
10-107144
44
2.7500-0.1P-0.2L-DS
1.031
.656
3.000
2.625-16UN
.698
.800
10-107148
48
3.0000-0.1P-0.2L-DS
1.031
.656
3.125
2.875-16UN
.698
.800
Part
Number*
Shell
Size
10-107110
10S
10-107112
12S
10-107113
A Thread
(plated)
Class 2A
*For complete order number see page 4
7
QWL
10-1072XX
box mount receptacle
K
S
M
R
S
Z
W
R
Y
T
4 HOLES
B
A
All dimensions for reference only.
A
Thread
(Plated)
Class 2A
B
Min
Full
Thread
K
+.026
–.010
M
+.016
–.000
R
±.005
S
±.020
T
Dia
+.004
–.003
W
+.020
–.036
Y
Dia
±.010
Z
Max
Part
Number*
Shell
Size
10-107210
10S
.6250-0.05P-0.1L-DS
.391
.703
.562
.719
1.000
.150
.281
.469
.451
10-107212
12S
.7500-0.1P-0.2L-DS
.391
.703
.562
.812
1.094
.150
.281
.594
.451
10-107213
12
.7500-0.1P-0.2L-DS
.625
.891
.750
.812
1.094
.150
.469
.594
.700
10-107214
14S
.8750-0.1P-0.2L-DS
.391
.703
.562
.906
1.188
.150
.281
.719
.451
10-107215
14
.8750-0.1P-0.2L-DS
.625
.891
.750
.906
1.188
.150
.469
.719
.700
10-107216
16S
1.0000-0.1P-0.2L-DS
.391
.703
.562
.969
1.281
.150
.281
.844
.451
10-107217
16
1.0000-0.1P-0.2L-DS
.625
.891
.750
.969
1.281
.150
.469
.844
.700
10-107218
18
1.1250-0.1P-0.2L-DS
.625
.906
.750
1.062
1.375
.177
.453
.969
.686
10-107220
20
1.2500-0.1P-0.2L-DS
.625
.906
.750
1.156
1.500
.177
.453
1.125
.686
10-107222
22
1.3750-0.1P-0.2L-DS
.625
.906
.750
1.250
1.625
.177
.453
1.250
.686
10-107224
24
1.5000-0.1P-0.2L-DS
.625
1.000
.812
1.375
1.750
.177
.359
1.375
.585
10-107228
28
1.7500-0.1P-0.2L-DS
.625
1.000
.812
1.562
2.000
.177
.359
1.594
.591
10-107232
32
2.0000-0.1P-0.2L-DS
.625
1.063
.875
1.750
2.250
.209
.296
1.844
.528
10-107236
36
2.2500-0.1P-0.2L-DS
.625
1.063
.875
1.938
2.500
.209
.296
2.031
.528
10-107240
40
2.5000-0.1P-0.2L-DS
.625
1.063
.875
2.188
2.750
.209
.296
2.281
.528
10-107244
44
2.7500-0.1P-0.2L-DS
.625
1.063
.875
2.375
3.000
.209
.546
2.562
.769
10-107248
48
3.0000-0.1P-0.2L-DS
.625
1.063
.875
2.625
3.250
.209
.546
2.812
.769
*For complete order number see page 4
8
QWL
10-1073XX
jam nut receptacle (wall mount)
S
F
M
P
N
Z
H
A
P
S
E
B
Shell
Size
10
12, 13
14, 15
16, 17
18
20
22
24
28
32
36
40
V
LEFT HAND
W
K
Dia
+.005
–.000
.880
1.005
1.130
1.255
1.380
1.505
1.630
1.880
2.130
2.380
2.630
2.880
mounting dimensions
G
±.003
.518
.562
.606
.699
.739
.783
.830
.919
1.007
1.096
1.183
1.292
U
±.005
.625
.688
.750
.875
.938
1.000
1.062
1.188
1.312
1.438
1.562
1.703
U
G
.125 ±.002
DIA. PIN
G U
K
All dimensions for reference only.
H
Panel
Thickness
Max
M
±.010
N
±.015
P
±.010
S
±.010
V
Thread
Class 2A-LH
W
Z
±.010 Max
.094
.227
.844
.469
.375
1.062
.500-28UNEF
.344
.094
.200
.906
.469
.442
1.250
.625-24UNEF
.344
.232
1.062
.094
.188
1.094
.641
.442
1.250
.625-24UNEF
.516
.483
1.000-20UNEF
1.250
.094
.200
.906
.469
.486
1.376
.750-20UNEF
.344
.232
1.000-20UNEF
1.250
.094
.188
1.094
.641
.486
1.376
.750-20UNEF
.516
.483
.385
1.125-18UNEF
1.312
.094
.200
.906
.469
.530
1.500
.875-20UNEF
.344
.232
1.0000-0.1P-0.2L-DS
.585
1.125-18UNEF
1.312
.094
.188
1.094
.641
.530
1.500
.875-20UNEF
.516
.483
18
1.1250-0.1P-0.2L-DS
.585
1.250-18UNEF
1.500
.094
.203
1.109
.704
.623
1.750
1.000-20UNEF
.516
.467
20
1.2500-0.1P-0.2L-DS
.585
1.375-18UNEF
1.562
.094
.203
1.109
.704
.663
1.875
1.125-18UNEF
.516
.467
10-107322
22
1.3750-0.1P-0.2L-DS
.585
1.500-18UNEF
1.750
.094
.203
1.109
.704
.707
2.000
1.250-18UNEF
.516
.467
10-107324
24
1.5000-0.1P-0.2L-DS
.585
1.625-18UNEF
1.875
.094
.265
1.172
.704
.751
2.125
1.375-18UNEF
.516
.404
10-107328
28
1.7500-0.1P-0.2L-DS
.585
1.875-16UNEF
2.125
.094
.265
1.172
.704
.840
2.375
1.625-18UNEF
.516
.404
10-107332
32
2.0000-0.1P-0.2L-DS
.585
2.125-16UNEF
2.375
.094
.203
1.172
.735
.928
2.625
1.875-16UN
.516
.404
10-107336
36
2.2500-0.1P-0.2L-DS
.585
2.375-16UN
2.625
.094
.203
1.172
.735
1.017
2.875
2.0625-16UN
.516
.404
10-107340
40
2.5000-0.1P-0.2L-DS
.585
2.625-16UN
2.875
.094
.203
1.172
.735
1.104
3.125
2.3125-16UN
.516
.404
10-107344
44
2.7500-0.1P-0.2L-DS
.585
2.875-16UN
3.125
.094
.265
1.234
.922
1.213
3.406
2.625-16UN
.703
.593
10-107348
48
3.0000-0.1P-0.2L-DS
.585
3.125-16UN
3.375
.094
.265
1.234
.922
1.299
3.656
2.875-16UN
.703
.593
Part
Number*
Shell
Size
10-107310
10-107312
F
Hex
±.010
Min
A Thread
Class 2A
B
±.010
E Thread
Class 2A
10S
.6250-0.5-0.1L-DS
.385
.6875-24UNEF
.875
12S
.7500-0.1P-0.2L-DS
.385
.875-20UNEF
1.062
10-107313
12
.7500-0.1P-0.2L-DS
.585
.875-20UNEF
10-107314
14S
.8750-0.1P-0.2L-DS
.385
10-107315
14
.8750-0.1P-0.2L-DS
.585
10-107316
16S
1.0000-0.1P-0.2L-DS
10-107317
16
10-107318
10-107320
*For complete order number see page 4.
9
.295
QWL
10-1074XX
thru bulkhead receptacle
L
C
M
M
S
G
R
S
R
T
4 HOLES
B
A
A
B
All dimensions for reference only.
Part
Number*
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
C
Ref
G
Max
Bulkhead
Thickness
L
±.015
M
+.000
–.010
R
±.005
S
±.020
T
Dia
+.004
–.003
10-107410
10S
.6250-0.05P-0.1L-DS
.406
.141
.266
1.563
.711
.719
1.000
.120
10-107412
12S
.7500-0.1P-0.2L-DS
.406
.141
.266
1.563
.711
.812
1.094
.120
10-107413
12
.7500-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
.812
1.094
.120
10-107414
14S
.8750-0.1P-0.2L-DS
.406
.141
.266
1.563
.711
.906
1.188
.120
10-107415
14
10-107416
16S
.8750-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
.906
1.188
.120
1.0000-0.1P-0.2L-DS
.406
.141
.266
1.563
.711
.969
1.281
.120
10-107417
16
1.0000-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
.969
1.281
.120
10-107418
18
1.1250-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.062
1.375
.120
10-107420
20
1.2500-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.156
1.500
.120
10-107422
22
1.3750-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.250
1.625
.120
10-107424
24
1.5000-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.375
1.750
.147
10-107428
28
1.7500-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.562
2.000
.147
10-107432
32
2.0000-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.750
2.250
.173
10-107436
36
2.2500-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
1.938
2.500
.173
10-107440
40
2.5000-0.1P-0.2L-DS
.625
.155
.312
2.125
.985
2.188
2.750
.173
10-107444
44
2.7500-0.1P-0.2L-DS
.625
.155
.438
2.375
1.110
2.375
3.000
.209
*For complete order number see page 4
10
QWL
10-1076XX
straight plug
Z
J
N
B
Q
D
G
A
V
LEFT
HAND
All dimensions for reference only.
D
Dia
+.010
–.000
Q
Dia
Max
V Thread
(Plated)
Class 2A-LH
Z
Max
.563
.882
.500-28UNEF
.603
.563
1.010
.625-24UNEF
.603
.719
.750
1.010
.625-24UNEF
.852
.234
.531
.563
1.137
.750-20UNEF
.603
.985
.077
.719
.750
1.137
.750-20UNEF
.852
1.109
.234
.531
.563
1.264
.875-20UNEF
.603
1.109
.141
.719
.750
1.264
.875-20UNEF
.852
.578
1.235
.266
.719
.750
1.455
1.000-20UNEF
.852
1.2500-0.1P-0.2L-DS
.578
1.359
.266
.719
.750
1.551
1.1250-18UNEF
.852
1.3750-0.1P-0.2L-DS
.578
1.485
.266
.719
.750
1.678
1.2500-18UNEF
.852
24
1.5000-0.1P-0.2L-DS
.594
1.609
.266
.719
.812
1.806
1.375-18UNEF
.852
10-107628
28
1.7500-0.1P-0.2L-DS
.594
1.859
.266
.719
.812
2.060
1.625-18UNEF
.852
10-107632
32
2.0000-0.1P-0.2L-DS
.594
2.109
.266
.719
.875
2.315
1.875-16UN
.852
10-107636
36
2.2500-0.1P-0.2L-DS
.556†
2.359
.285**
.719
.875
2.569
2.0625-16UNS
.852
10-107640
40
2.5000-0.1P-0.2L-DS
.556†
2.609
.285**
.719
.875
2.824
2.3125-16UNS
10-107644
44
2.7500-0.1P-0.2L-DS
.700††
2.922
.141***
.719
1.000
3.142
2.625-16UN
1.103
10-107648
48
3.0000-0.1P-0.2L-DS
.719
3.172
.141
.719
1.000
3.381
2.875-16UN
1.093
J
±.005
N
±.010
.053
.531
.109
.531
.859
.077
.985
.578
.406
1.0000-0.1P-0.2L-DS
.578
18
1.1250-0.1P-0.2L-DS
10-107620
20
10-107622
22
10-107624
Part
Number*
Shell
Size
A Thread
Class 2B
B
±.020
10-107610
10S
.6250-0.05P-0.1L-DS
.406
.735
10-107612
12S
.7500-0.1P-0.2L-DS
.406
.859
10-107613
12
.7500-0.1P-0.2L-DS
.578
10-107614
14S
.8750-0.1P-0.2L-DS
.406
10-107615
14
.8750-0.1P-0.2L-DS
10-107616
16S
1.0000-0.1P-0.2L-DS
10-107617
16
10-107618
G
±.030
*For complete order number see page 4
**Applicable Tolerance is ±.033
***Applicable Tolerance is +.030
–.020
†Applicable Tolerance is ±.026
††Applicable Tolerance is +.013
–.023
11
.852
QWL
10-1077XX
flange mount plug
Z
S
J
A
N
R
S
R
T
4 HOLES
C
All dimensions for reference only.
Part
Number*
Shell
Size
10-107710
10S
10-107712
12S
10-107713
A Thread
Class 2B
C
±.005
J
±.005
N
±.020
R
±.005
.6250-0.05P-0.1L-DS
.125
.531
.438
.7500-0.1P-0.2L-DS
.156
.531
.438
12
.7500-0.1P-0.2L-DS
.156
.719
10-107714
14S
.8750-0.1P-0.2L-DS
.156
.531
10-107715
14
.8750-0.1P-0.2L-DS
.156
.719
.688
.812
1.062
4-40 NC
.852
10-107716
16S
1.0000-0.1P-0.2L-DS
.156
.531
.438
1.000
1.312
6-32 NC
.602
10-107717
16
1.0000-0.1P-0.2L-DS
.156
.719
.688
1.000
1.312
6-32 NC
.852
10-107718
18
1.1250-0.1P-0.2L-DS
.156
.719
.688
1.000
1.312
6-32 NC
.852
10-107720
20
1.2500-0.1P-0.2L-DS
.188
.719
.688
1.250
1.625
10-32 NF
.852
10-107722
22
1.3750-0.1P-0.2L-DS
.188
.719
.688
1.250
1.625
10-32 NF
.852
10-107724
24
1.5000-0.1P-0.2L-DS
.188
.719
.688
1.562
2.000
10-32 NF
.852
10-107728
28
1.7500-0.1P-0.2L-DS
.188
.719
.688
1.562
2.000
10-32 NF
.852
10-107732
32
2.0000-0.1P-0.2L-DS
.250
.719
.781
1.812
2.500
10-32 NF
.852
10-107736
36
2.2500-0.1P-0.2L-DS
.250
.719
.781
1.812
2.500
10-32 NF
.852
10-107740
40
2.5000-0.1P-0.2L-DS
.250
.719
.781
2.250
3.031
10-32 NF
.852
10-107744
44
2.7500-0.1P-0.2L-DS
.250
.719
1.000
2.375
3.031
10-32 NF
.852
10-107748
48
3.0000-0.1P-0.2L-DS
.250
.719
1.000
2.562
3.250
10-32 NF
.852
*For complete order number see page 4
12
S
±.020
T
Thread
Z
Max
.562
.781
4-40 NC
.602
.812
1.062
4-40 NC
.602
.688
.812
1.062
4-40 NC
.852
.438
.812
1.062
4-40 NC
.602
QWL
10-1079XX
jam nut receptacle (box mount)
M
S
Z
C
F
H
P
A
P
S
B
Shell
Size
10
12, 13
14, 15
16, 17
18
20
22
24
28
32
36
40
44
48
E
K Dia
+.005
–.000
.693
.880
1.005
1.130
1.255
1.380
1.505
1.630
1.880
2.130
2.380
2.630
2.880
3.130
G
±.003
.451
.518
.562
.606
.699
.739
.783
.830
.919
1.007
1.096
1.183
1.292
1.378
U
±.005
.531
.625
.688
.750
.875
.938
1.000
1.062
1.188
1.312
1.438
1.562
1.703
1.828
mounting dimensions
U
G
.125 ±.002
DIA. PIN
G U
K
All dimensions for reference only.
A Thread
Class 2A
B
C
±.010 ±.005
E Thread
Class 2A
(Plated)
F
Hex
±.016
H
Panel Thickness
M
±.010
P
±.010
S
±.010
Z
Max
Part
Number*
Shell
Size
10-107910
10S
.6250-0.05P-0.1L-DS
.385
.125
.6875-24NEF
.875
.094
.227
.844
.375
1.062
.295
10-107912
12S
.7500-0.1P-0.2L-DS
.385
.125
.875-20UNEF
1.062
.094
.200
.906
.442
1.250
.232
10-107913
12
.7500-0.1P-0.2L-DS
.585
.125
.875-20UNEF
1.062
.094
.282
1.188
.442
1.250
.389
10-107914
14S
.8750-0.1P-0.2L-DS
.385
.125
1.000-20UNEF
1.250
.094
.200
.906
.486
1.376
.232
10-107915
14
.8750-0.1P-0.2L-DS
.585
.125
1.000-20UNEF
1.250
.094
.282
1.188
.486
1.376
.389
10-107916
16S
1.0000-0.1P-0.2L-DS
.385
.125
1.125-18NEF
1.312
.094
.200
.906
.530
1.500
.232
10-107917
16
1.0000-0.1P-0.2L-DS
.585
.125
1.125-18NEF
1.312
.094
.282
1.188
.530
1.500
.389
10-107918
18
1.1250-0.1P-0.2L-DS
.585
.188
1.250-18NEF
1.500
.094
.250
1.156
.623
1.750
.420
10-107920
20
1.2500-0.1P-0.2L-DS
.585
.188
1.375-18NEF
1.562
.094
.250
1.156
.663
1.875
.420
10-107922
22
1.3750-0.1P-0.2L-DS
.585
.188
1.500-18NEF
1.750
.094
.250
1.156
.707
2.000
.420
10-107924
24
1.5000-0.1P-0.2L-DS
.585
.188
1.625-18NEF
1.875
.094
.312
1.219
.751
2.125
.357
10-107928
28
1.7500-0.1P-0.2L-DS
.585
.188
1.875-16UN
2.125
.094
.312
1.219
.840
2.375
.357
10-107932
32
2.0000-0.1P-0.2L-DS
.585
.219
2.125-16UN
2.375
.094
.282
1.250
.928
2.625
.326
10-107936
36
2.2500-0.1P-0.2L-DS
.585
.219
2.375-16UN
2.625
.094
.282
1.250
1.017
2.875
.326
10-107940
40
2.5000-0.1P-0.2L-DS
.585
.219
2.625-16UN
2.875
.094
.282
1.250
1.104
3.125
.326
10-107944
44
2.7500-0.1P-0.2L-DS
.585
.219
2.875-16UN
3.125
.094
.422
1.390
1.213
3.406
.436
10-107948
48
3.0000-0.1P-0.2L-DS
.585
.219
3.125-16UN
3.375
.094
.422
1.390
1.299
3.656
.436
*For complete order number see page 4.
13
Min
Max
QWL
insert arrangements - selection guide
Contact Size
Contact Size
16
Insert
Arrangement
Service
Rating
Total
Contacts
0
1
1
20-2
D
1
1
A
2
2
20-3
D
3
3
D
1
1
20-4
D
4
4
20-6
D
3
3
20-7
D/A
8
4
20-8
Inst.
6
Insert
Arrangement
Service
Rating
Total
Contacts
10S-2
A
12S-3
12S-4
12-5
D
1
14S-1
A
3
14S-2
Inst.
4
0
4
8
12
1
14S-4
D
1
1
20-9
D/A
8
14S-5
Inst.
5
5
20-11
Inst.
13
14S-6
Inst.
6
6
20-12
A
2
14S-7
A
3
3
20-14
A
5
4
8
12
16
3
8
2
4
1
7
13
1
1
2
3
14S-9
A
2
2
20-15
A
7
7
14S-10
Inst.
4
4
20-16
A
9
2
7
14S-12
A
3
3
20-17
A
6
5
1
14-3
A
1
20-18
A
9
3
6
16S-1
A
7
7
20-19
A
3
16S-3
B
1
1
20-20
A
4
16S-4
D
2
2
20-21
A
9
16S-5
A
3
3
20-22
A
6
3
16S-6
A
3
3
20-23
A
2
2
16S-8
A
5
5
20-24
A
4
2
16-2
E
1
20-25
Inst.
13
13
16-7
A
3
2
20-27
A
14
14
16-9
A
4
2
2
20-29
A
17
17
16-10
A
3
3
20-30
Inst.
13
13
16-11
A
2
2
20-33
A
11
11
16-12
A
1
22-1
D
2
2
16-13
A
2
22-2
D
3
3
18-1
A/Inst.
10
22-4
A
4
2
18-3
D
2
22-5
D
6
18-4
D
4
4
22-6
D
3
18-5
D
3
1
22-7
E
1
18-6
D
1
22-8
E
2
2
18-7
B
1
22-9
E
3
3
18-8
A
8
1
7
22-10
E
4
18-9
Inst.
7
2
5
22-11
B
2
18-10
A
4
4
22-12
D
5
18-11
A
5
5
22-13
D/A
5
18-12
A
6
22-14
A
19
18-13
A
4
22-15
E/A
6
5
1
18-14
A
2
22-16
A
9
3
6
1
1
1
1
1
2
10
2
2
1
1
6
1
3
1
1
3
1
3
1
8
3
2
2
2
2
4
1
1
4
2
2
3
4
1
19
18-15
A
4
4
22-17
D/A
9
18-16
C
1
1
22-18
D/A
8
8
18-17
Inst.
7
2
5
22-19
A
14
14
18-19
A
10
10
22-20
A
9
18-20
A
5
5
22-21
A
3
18-22
D
3
3
22-22
A
4
18-24
A/Inst.
10
10
22-23
D/A
8
18-29
A
5
5
22-24
D/A
6
18-30
A
5
5
22-27
D/A
9
18-31
A
5
5
22-28
A
7
14
8
9
1
2
4
8
2
1
4
8
7
QWL
insert arrangements, cont.
Contact Size
Insert
Arrangement
Service
Rating
Total
Contacts
22-33
D/A
7
22-34
D
5
3
22-36
D/A
8
8
24-2
D
7
7
24-3
D
7
2
24-5
A
16
24-6
D/A
8
8
24-7
A
16
2
0
4
8
12
Insert
Arrangement
16
Total
Contacts
0
E/D
5
2
4
8
12
16
7
32-1
2
32-2
E
5
32-3
D
9
32-4
A/D
14
5
32-5
D
2
16
32-6
A
23
32-7
Inst./A
35
7
28
32-8
A
30
6
24
32-9
D
14
2
32-10
E/B/D/A
7
2
32-12
A/D
15
14
24-9
A
2
24-10
A
7
2
7
24-11
A
9
3
6
32-13
D
23
1
3
3
32-15
D
8
2
Contact Size
Service
Rating
3
3
3
1
2
2
2
4
2
12
2
16
2
2
3
12
2
3
5
10
5
18
24-12
A
5
24-16
D/A
7
24-17
D
5
2
3
32-16
A
23
2
24-20
D
11
2
9
32-17
D
4
4
24-21
D
10
1
9
32-22
A
54
24-22
D
4
4
36-1
D
22
24-27
E
7
7
36-3
D
6
3
24-28
Inst.
24
24
36-4
D/A
3
3
28-1
D/A
9
36-5
A
4
4
28-2
D
14
36-6
A
6
2
28-3
E
3
36-7
A
47
7
28-4
E/D
9
1
46
28-5
D
5
2
14
14
28-6
D
3
28-7
D
2
28-8
E/D/A
12
2
28-9
D
12
6
28-10
D/A
7
28-11
A
22
28-12
A
28-13
A
28-15
A
3
6
2
12
3
2
6
3
2
16
54
4
18
3
4
40
2
7
36-8
A
47
1
2
36-9
A
31
3
36-10
A
48
48
2
36-11
A
48
48
10
36-12
A
48
6
36-13
E/A
17
36-14
D
16
18
36-15
D/A
35
26
26
36-16
A
47
7
26
26
36-17
A
47
7
40
35
35
36-18
A
31
2
14
14
2
2
2
2
3
4
1
2
48
2
5
5
15
6
35
1
40
28-16
A
20
20
36-20
A
34
28-17
B/D/A
15
15
36-52
A
52
28-18
C/D/A/Inst.
12
12
40-1
D
30
28-19
B/D/A
10
4
6
40-9
A
47
28-20
A
14
10
4
40-56
A
85
85
28-21
A
37
37
48-62
D
85
85
28-22
D
6
3
3
15
30
52
1
6
24
22
24
QWL
special insert arrangements
Insert
Arrange
ment
14S-A7
16-59
20-26
20-51
20-57
20-58
20-59
20-66
20-79
22-63
22-65
22-70
22-80
24-19
24-51
24-52
24-53
24-58
24-59
24-60
24-65
24-66
24-67
24-71
24-75
24-79
24-80
24-84
24-96
24-AJ
28-51
28-59
28-66
28-72
28-74
28-75
28-79
28-82
28-84
28-AY
32-25
32-31
32-48
32-52
32-53
32-56
32-57
32-58
32-60
32-62
32-64
32-68
32-73
32-75
32-76
32-79
32-82
Service
Rating
A
A
A
A
A
A
A
A
A/D
A
A/D
A
A
A
A
Hi Volt.
A
A
A
A
A
D
Inst.
A
A
A
Inst.
A
Inst.
A
A
A
A
Coax
A
A
A
D
A
A
A
A
Inst.
D
Inst./E
A
Coax
Coax
A
Coax
Inst.
A
A
Coax
A
D
A
Total
Contacts
7
4
19
3
7
10
3
6
8
12
8
13
3
12
5
1
5
13
14
7
15
7
19
7
7
5
23
19
28
25
12
17
16
3
16
16
16
6
9
9
25
31
48
8
42
30
8
4
23
23
54
16
46
9
19
5
16
Contact Size
4/0 2/0
0
4
8
12
16
7
Insert
Arrange
ment
32-AF
36-51
36-54
36-55
36-59
36-60
36-64
36-65
36-71
36-73
36-74
36-75
36-76
36-77
36-78
36-79
36-80
36-83
36-85
36-97
36-AF
40-5
40-10
40-35
40-53
40-57
40-61
40-62
40-63
40-64
40-66
40-67
40-68
40-70
40-72
40-73
40-74
40-75
40-80
40-81
40-82
40-85
40-86
40-87
40-AD
40-AG
40-AP
40-AR
40-AS
40-AT
40-AU
40-AV
44-52
44-53
48-51
48-52
48-53
48-54
48-55
48-57
48-60
Coax**
0 4 8 12
4
19
3
7*
5
5
3*
5*
1
4
8*
8
1
7
8
5
3*
12
5
1
5
3
3
7
7
7
11
7
19
4
7*
7*
7*
5
23
1
18
28
25
2
12
7
14
10
3
7*
7*
7
2
9
9
9
9
4
4
5
25
31
48
2
6
5
6*
6
37
24
2
4
2
1
2
15
16
54
12
46
2
19
4
4
8
2
4
7
1
12
* Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 18-40 for application wire size.
** Coaxial cable data can be found on insert arrangement drawings, pages 38-48. For
further information on coaxial contacts and cable see catalog 12-130.
Consult Sidney, NY for alternate rotations not covered on page 17.
16
Service
Rating
A
D
A
A
A
A
Coax
Coax
A
Coax
A
A
A
D
A
A
A
Coax
A/D
C
A
A
A
D
A
E
A
A
A
Coax
Coax
A
A
A
A
A
A
E
A
A
A
A
E
D
A
A
E
Inst.
A
A
A
D
A
A
A
A
D
A
A
A
A
Total
Contacts
55
4
39
39
53
47
4
4
53
7
44
48
47
7
14
20
20
7
35
1
48
5
29
35
60
4
59
60
61
36
4
11
21
61
11
61
6
5
11
62
62
60
4
7
8
38
2
13
40
43
14
3
104
36
56
61
37
56
78
56
56
Contact Size
4/0 2/0
0
4
2
2
8
12
8
8*
3*
7*
16
55
0
Coax**
4 8 12
31
31
50
40
4
4
3
50
7
43
48*
47
1
7
12
2
20
20*
7
35*
1
48
5
4
9
16
35
60
4
1
3
3
55
60
61*
20
13
4
1
10
61
1
61
10
21
1
1
4
10
4
1
1
62*
62
60*
4
7
4
4
38
2
3
3
3
1
10
7
25
24
15
18
1
3
104
18
42 4
56 5
10
37
6
4
10
2
10
10
2
42
68
42
42
4
4
18
QWL
alternate positioning
To avoid cross-plugging problems in applications requiring the use of more than one connector of the same
size and arrangement, alternate rotations are available
as indicated in the accompanying charts.
The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are:
Degrees
B
A
B
A
A
B
A
B
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees
in respect to the normal shell key.
Position W
Position X
Position Y
Position Z
View looking into front face of pin insert or rear of socket insert.
Degrees
X
Y
Z
80
110
250
280
16-7
20-22
22-29
24-17
28-16
18-5
22-6
22-33
24-20
28-17
32-22
18-9
22-12
22-34
24-21
28-19
32-AF
W
X
Y
Z
10SL-4
63
–
–
–
20-18
12S-3
70
145
215
290
20-19
90
180
14S-2
–
120
240
–
20-21
35
110
32-13
18-13
22-14
24-1
24-28
28-20
36-1
18-14
22-15
24-3
28-1
28-21
36-7
20-7
22-16
24-4
28-4
32-1
36-8
20-8
22-17
24-5
28-8
32-3
36-13
20-9
22-18
24-6
28-9
32-4
40-AR
20-12
22-19
24-7
28-10
32-6
40-AS
20-14
22-21
24-12
28-11
32-9
40-AT
20-16
22-24
24-14
28-14
32-10
40-AU
20-20
22-25
24-16
28-15
32-12
Degrees
Insert
Arrangement
Insert
Arrangement
W
Insert
Arrangement
Degrees
W
X
Y
Z
W
X
35
110
250
325
28-7
Y
Z
35
110
250
325
270
–
28-12
90
180
270
–
250
325
28-18
70
145
215
290
290
14S-5
–
110
–
–
20-23
35
110
250
325
28-22
70
145
215
14S-7
90
180
270
–
20-24
35
110
250
325
28-AY
45
110
250
–
14S-9
70
145
215
290
20-27
35
110
250
325
32-2
70
145
215
290
16-9
35
110
250
325
20-29
80
–
–
280
32-5
35
110
250
325
16-10
90
180
270
–
22-1
35
110
250
325
32-7
80
125
235
280
16-11
35
110
250
325
22-2
70
145
215
290
32-8
80
125
235
280
16-13
35
110
250
325
22-4
35
110
250
325
32-15
35
110
250
280
16S-1
80
–
–
280
22-5
35
110
250
325
32-17
45
110
250
–
16S-4
35
110
250
325
22-8
35
110
250
325
32-25
60
120
–
–
16S-5
70
145
215
290
22-9
70
145
215
290
32-48
80
–
–
–
16S-6
90
180
270
–
22-10
35
110
250
325
32-64
80
100
110
250
–
16S-8
–
170
265
–
22-11
35
110
250
325
32-68
30
–
–
18-1
70
145
215
290
22-13
35
110
250
325
32-82
30
–
–
–
18-3
35
110
250
325
22-20
35
110
250
325
36-3
70
145
215
290
18-4
35
110
250
325
22-22
–
110
250
–
36-4
70
145
215
290
18-8
70
–
–
290
22-23
35
–
250
–
36-5
–
120
240
–
18-10
–
120
240
–
22-27
80
–
250
280
36-6
35
110
250
325
18-11
–
170
265
–
22-28
80
–
–
280
36-9
80
125
235
280
18-12
80
–
–
280
22-63
20
–
–
–
36-10
80
125
235
280
18-15
–
120
240
–
24-2
80
–
–
280
36-14
90
180
270
–
18-20
90
180
270
–
24-9
35
110
250
325
36-15
60
125
245
305
18-22
70
145
215
290
24-10
80
–
–
280
36-AF
65
–
–
–
18-29
90
180
270
–
24-11
35
110
250
325
40-1
65
130
235
300
20-3
70
145
215
290
24-22
45
110
250
–
40-5
33
–
–
270
20-4
45
110
250
–
24-27
80
–
–
280
40-9
65
125
225
310
20-5
35
110
250
325
28-2
35
110
250
325
40-10
65
125
225
310
20-6
70
145
215
290
28-3
70
145
215
290
40-35
70
130
230
290
20-15
80
–
–
280
28-5
35
110
250
325
40-AD
45
–
–
–
20-17
90
180
270
–
28-6
70
145
215
290
40-AG
37
74
285
322
40-AP
35
110
250
325
40-AV
90
180
270
–
17
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
D
A
C
B
A
C
B
Insert Arrangement
10S-2
12S-3
12S-4
12-5
14S-1
14S-2
Service Rating
A
A
A
D
A
Inst.
Number of Contacts
1
2
1
1
3
4
Contact Size
16
16
16
12
16
16
A
E
B
B
E
B
100˚
A
F
A
A
C
D
C
D
C
D
A
C
B
B
100° Rotation
of 14S-2
Insert Arrangement
14S-4
14S-5
14S-6
14S-7
14S-9
14S-10
Service Rating
D
Inst.
Inst.
A
A
Inst.
Number of Contacts
1
5
6
3
2
4
Contact Size
16
16
16
16
16
16
100˚
F
E
B
A
A
G
A
C
B
D
B
A
C
C
B
100° Rotation
of 14S-7
Insert Arrangement
14S-12
14-3
16S-1
16S-3
16S-4
16S-5
Service Rating
A
A
A
B
D
A
Number of Contacts
3
1
7
1
2
3
Contact Size
16
8
16
16
16
16
E
C
A
A
B
A
A
D
D
C
B
Insert Arrangement
B
B
C
C
16S-6
16S-8
16-2
16-7
Service Rating
A
A
E
A
Number of Contacts
3
5
1
1
2
2
Contact Size
16
16
12
8
16
12 16
CONTACT LEGEND
16
18
16-9
A
12
8
4
2
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
C
H
A
A
B
A
G
A
B
I
B
J
F
B
C
B
Insert Arrangement
E
A
D
16-10
16-11
16-12
16-13
18-1
18-3
Service Rating
A
A
A
A
B, C, F, G = A; Bal. = Inst.
D
Number of Contacts
3
2
1
2*
10
2
Contact Size
12
12
4
12
16
12
G
D
F
A
A
C
Insert Arrangement
Service Rating
F
A
C
E
H
E
B
C
B
B
D
C
D
B
G
A
18-4
18-5
18-6
18-7
18-8
18-9
D
D
D
B
A
Inst.
Number of Contacts
4
2
1
1
1
1
7
2
5
Contact Size
16
12
16
4
8
12
16
12
16
E
D
A
F
D
D
E
A
A
C
C
B
C
D
B
Service Rating
D
B
B
A
18-10
18-11
18-12
18-13
18-14
18-15
A
A
A
A
A
A
Number of Contacts
4
5
6
1
3
1
1
4**
Contact Size
12
12
16
8
12
4
16
12
B
G
100˚
A
F
C
E
B
B
D
E
F
C
G
A
H
D
A
H
J
B
I
E
C
A
B
250˚
J
F
C
E
D
K
100° Rotation
of 18-9
Service Rating
A
G
G
Insert Arrangement
D
250° Rotation
of 18-1
18-16
18-17
18-19
18-20
18-22
18-24
C
Inst.
A
A
D
B, C, F, G = A; Bal. = Inst.
Number of Contacts
1
2
5
10
5
3
10
Contact Size
12
12
16
16
16
16
16
CONTACT LEGEND
* A = Iron; B = Constantan
** A, C = Iron; B, D = Constantan
B
C
B
C
Insert Arrangement
A
A
19
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
E
110˚
A
A
A
B
C
D
E
B
E
C
D
A
B
C
C
A
C
B
B
D
260˚
D
110° Rotation
of 18-20
260° Rotation
of 18-20
18-29
18-30
18-31
20-2
20-3
20-4
Service Rating
A
A
A
D
D
D
Number of Contacts
5
5
5
1
3
4
Contact Size
16
16
16
0
12
12
Insert Arrangement
A
A
C
G
E
B
A
B
F
H
G
L
B
H
F
F
C
Insert Arrangement
F
A
D
E
E
G
N
D
A
C
C
C
B
E
B
M
D
H
A
D
K
B
J
20-6
20-7
20-8
20-9
20-11
Service Rating
D
A, B, H, G = D; C, D, E, F = A
Inst.
H = D; Bal. = A
Inst.
Number of Contacts
3
8
2
4
1
7
13
1
1
Contact Size
16
16
8
16
12
16
16
4
16
E
F
A
E
G
F
E
A
B
D
H
H
D
A
B
D
C
C
A
Insert Arrangement
G
C
B
A
A
F
F
D
C
A
E
G
I
20-12
B
I
E
C
C
D
B
B
20-14
20-15
20-16
20-17
20-18
20-19
A
A
A
A
A
A
Service Rating
Number of Contacts
2
3
7
2
7
5
1
3
6
3
Contact Size
8
12
12
12
16
12
16
12
16
8
CONTACT LEGEND
20
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
D
A
F
H
I
C
G
C
F
L
B
C
F
M
E
A
D
B
D
D
E
B
100˚
A
A
B
B
C
N
B
G
H
A
D
C
E
K
J
100° Rotation
of 20-11
Insert Arrangement
20-20
Service Rating
20-21
A
20-22
20-23
A
A
A
20-24
20-25
A
Inst.
Number of Contacts
1
3
1
8
3
3
2
2
2
13
Contact Size
4
12
12
16
8
16
8
8
16
16
J
A
A
I
M
B
L
K
H
N
G
L
C
K
B
L
C
N
T
P
S
R
B
D
M
F
J
E
250˚
F
H
G
N
E
D
F
D
E
H
A
B
M
J
K
A
A
K
C
M
C
L
H
B
A
D
J
F
G
C
B
E
250° Rotation
of 20-11
Insert Arrangement
20-27
20-29
20-30
20-33
22-1
22-2
Service Rating
A
A
Inst.
A
D
D
Number of Contacts
14
17
13
11
2
3
Contact Size
16
16
16
16
8
8
A
F
A
E
D
B
B
A
B
C
Insert Arrangement
A
B
D
C
C
22-4
22-5
22-6
22-7
22-8
A
D
D
E
E
Service Rating
Number of Contacts
2
2
2
4
2
1
1
2
Contact Size
8
12
12
16
8
16
0
12
CONTACT LEGEND
21
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
D
A
E
B
C
B
A
E
C
B
C
B
B
D
Insert Arrangement
D
A
C
22-9
22-10
22-11
Service Rating
E
E
B
Number of Contacts
3
4
2
2
3
4
1
Contact Size
12
16
16
8
16
12
16
M
L
K
J
U
T
V
B
P
A
A
A
N
F
F
B
G
R
G
C
Service Rating
E = D; A, B, C, D = A
G
E
C
F
C
H
E
D
D
C
D
E
22-14
22-15
22-16
22-17
22-18
A
D = E; A, B, C, E, F = A
A
A = D; Bal. = A
A, B, F, G, H = D; C, D, E = A
Number of Contacts
19
5
1
3
6
1
8
8
Contact Size
16
12
16
12
16
12
16
16
A
B
K
J
L
M
P
H
Insert Arrangement
Service Rating
C
F
G
H
A
F
J
B
G
A
C
E
D
A
F
A
H
B
E
D
N
G
B
J
F
C
D
A
B
G
E
F
Insert Arrangement
D
H
B
D
E
22-13
A
H
J
S
H
22-12
B
E
D
C
B
C
C
D
22-19
22-20
22-21
22-22
22-23
A
A
A
A
H = D; Bal. = A
Number of Contacts
14
9
1
2
4
8
Contact Size
16
16
0
16
8
12
CONTACT LEGEND
22
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
H
F
D
A
E
C
G
F
C
C
G
E
Service Rating
B
E
D
D
Insert Arrangement
A
B
H
B
C
D
G
A
F
J
G
E
F
B
B
E
C
F
D
22-24
22-27
22-28
22-33
22-36
C, D, E = D; A, B, F = A
J = D; Bal. = A
H = D; Bal. = A*
A
A, B, C, D = D; E, F, G = A
Number of Contacts
2
4
1
8
7
7
8
Contact Size
12
16
8
16
12
16
12
A
F
C
B
F
A
E
A
A
E
B
B
F
J
K
M
A
G
F
E
G
L
E
B
C
D
G
G
B
H
H
N
E
D
C
D
D
P
C
C
R
D
S
Insert Arrangement
22-34
24-2
24-3
24-5
24-6
D
D
D
A
A, G, H = D; Bal. = A
Service Rating
Number of Contacts
3
2
7
2
5
16
8
Contact Size
12
16
12
12
16
16
12
A
L
K
P
A
B
F
C
M
B
N
J
A
E
B
C
A
G
A
B
D
E
F
E
D
D
I
O
H
Insert Arrangement
E
G
D
C
G
C
F
H
24-7
24-9
24-10
24-11
A
A
A
A
Service Rating
B
I
24-12
A
Number of Contacts
2
14
2
7
3
6
2
3
Contact Size
12
16
4
8
8
12
4
12
CONTACT LEGEND
* A, C, E, G = Iron
B, D, F, H = Constantan
23
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
D
F
B
E
A
J
C
G
E
H
K
B
H
C
L
G
C
A
B
B
G
J
F
D
E
Service Rating
C
B
E
D
Insert Arrangement
A
D
F
A
D
C
K
24-16
24-17
24-20
24-21
24-22
A, B, F, G = D; C, D, E, = A
D
D
D
D
Number of Contacts
1
3
3
2
3
2
9
1
9
4
Contact Size
8
12 16
12
16
12
16
8
16
8
A
H
A
A
F
E
B
K
L
R
G
E
B
F
C
G
N
M
S
T
A
J
L
A
B
J
P
G
Q
J
C
P
H
M
C
V
U
C
N
G
D
W
X
Y
D
C
B
Z
F
Insert Arrangement
K
B
D
H
F
D
E
E
24-27
24-28
28-1
28-2
28-3
Service Rating
E
Inst.
A, J, E = D; Bal. = A
D
E
Number of Contacts
7
24
3
6
2
12
3
Contact Size
16
16
8
12
12
16
8
S
A
C
P
G
A
B
E
D
A
E
Service Rating
A
F
D
Insert Arrangement
B
B
C
C
B
28-4
28-5
28-6
28-7
G, P, S = E; Bal. = D
D
D
D
Number of Contacts
2
7
2
1
2
3
2
Contact Size
12
16
4
12 16
4
4
CONTACT LEGEND
24
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
H
J
A
H
M
K
G
J
F
A
G
B
E
K
M
F
L
L
B
C
V
R
W
S
K
L
E
D
D
D
28-8
28-9
28-10
D
G = D; Bal. = A
A
10
6
6
2
2
3
4
18
Contact Size
12
16
12
16
4
8
12
12
16
A
M
100˚
S
a
b
N
C
U
d
V
X
K
b
H
C
U
d
Y
F
V
W
X
K
J
H
P
D
A
B
C D
E
F G
J
K
L
M
R
X
Z
G
A
T
L
S
C
H
R
Q
G
F
N
P
D
k
m
l
B
M
U
V
h
f
j
H
K
W
g
e
d
F
J
c
b
a
N
V
U
T
S
Y
E
L
G
J
B
T
Z
M
E
L
W
A
S
a
D
Y
R
P
B
T
Z
C
28-11
2
N
B
H
I
Number of Contacts
R
A
G
D
T
C
L, M = E; B = D; Bal. = A
P
E
F
M
C
Service Rating
P
X
E
Insert Arrangement
J
N
U
G
B
F
A
E
100° Rotation
of 28-12
Insert Arrangement
28-12
28-13
28-15
Service Rating
A
A
A
A
Number of Contacts
26
26
35
20
Contact Size
16
16
16
16
C
B
H
D
J
E
L
A G
R
A
L
K
A
B
K
F
C
M
K
C
E
D
J
M
E
H
N
Service Rating
B
L
M
P
Insert Arrangement
28-16
G
J
F
G
H
28-17
28-18
28-19
R = B; M, N, P = D; A to L = A
M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst.
H, M = B; A, B = D; Bal. = A
Number of Contacts
15
12
4
6
Contact Size
16
16
12
16
CONTACT LEGEND
25
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
J
B
N
E
K
S
C
n
F
Insert Arrangement
k
j
F
R
E
r
B
Z
B
f
m
E
p
E
A
J
X
e
d
h
C
P
W
V
c
b
g
H
N
U
a
D
M
L
T
L
M
G
D
G
F
K
P
H
A
C
A
B
D
D
C
s
28-20
28-21
28-22
32-1
A
A
D
A = E; B, C, D, E = D
Service Rating
Number of Contacts
10
4
37
3
3
2
3
Contact Size
12
16
16
4
16
0
12
B
F
A
A
C
E
D
E
G
F
A
K
A
L
B
C
B
O
H
G
D
J
M
D
H
C
E
N
B
J
Insert Arrangement
32-2
32-3
32-4
32-5
E
D
F, J, K, N = A; Bal. = D
D
Service Rating
Number of Contacts
3
2
1
2
2
4
2
12
2
Contact Size
4
16
0
4
12 16
12
16
0
A
B
G
H
C
E
K
P
L
M
X
d
N
R
h
e
S
T
V
X
S
L
Z
T
M
a
g
A
G
B
a
D
e
P
W
R
S
D
H
E
F
I
J
G
K
L
L
M
N
O
32-6
32-7
32-8
A
A, B, h, j = Inst.; Bal. = A
A
Service Rating
C
C
G
X
B
B
F
K
b
I
b
A
A
E
J
V
d
D
I
O
Z
C
N
V
Insert Arrangement
U
c
H
U
H
N
Y
K
Y
f
k
U
T
E
R
F
j
O
W
J
c
F
J
I
M
P
W
D
32-9
D
Number of Contacts
2
3
2
16
7
28
6
24
2
12
Contact Size
4
8
12 16
12
16
12
16
4
16
CONTACT LEGEND
26
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
F
A
M
C
E
N
B
A
G
B
E
D
H
F
G
J
X
L
K
A
B
P
R
B
C
Y
W
K
S
C
D
D
E
Z
V
J
D
C
L
M
T
N
E
F
U
H
O
Insert Arrangement
Service Rating
H
F
P
G
G
32-10
32-12
32-13
A, F = E; G = B; B, E = D; C, D = A
C, D, E, F, G = A; Bal. = D
D
32-15
D
Number of Contacts
2
2
3
5
10
5
18
2
6
Contact Size
4
8 16
12
16
12
16
0
12
A
100˚
E
G
H
P
L
M
J
A
N
S
m
T
V
AB
C
X
k
q
x
w
F
G
H
J
K
L
M
N
r
v
y
z
I
f
j
u
t
B
E
C
W
e
p
n
B
a
Z
d
h
g
D
R
V
U
Y
c
s
U
P
O
X
b
A
J
M
L
T
S
N
O
H
K
F
R
E
G
F
D
W
B
D
C
D
I
K
A
B
C
O
AC
P
R
S
U
V
W
T
AA
AD
AE
AG
AF
100° Rotation
of 32-6
Insert Arrangement
32-16
32-17
32-22
A
D
A
Service Rating
36-1
D
Number of Contacts
2
3
2
16
4
54
4
18
Contact Size
4
8
12 16
4
16
12
16
A
A
A
A
F
F
D
E
B
B
B
E
C
C
B
C
D
C
Insert Arrangement
D
36-3
36-4
36-5
36-6
D
A = D; B, C = A
A
A
Service Rating
Number of Contacts
3
3
3
4
2
4
Contact Size
0
12
0
0
0
4
CONTACT LEGEND
27
16
12
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
D
C
H
O
I
K
L
P
U
Y
Z
h
d
j
B
J
G
N
M
R
W
f
g
n
u
Y
T
m
w
U
n
s
f
H
b
F
R
L
X
G
y
z
T
N
z
Insert Arrangement
36-7
36-8
A
A
Service Rating
36-9
A
Number of Contacts
7
40
1
46
1
2
14 14
Contact Size
12
16
12
16
4
8
12 16
A
C
H
O
V
J
P
W
d
E
R
g
h
p
n
y
Insert Arrangement
V
k
r
w
v
O
c
b
j
q
u
U
a
C
H
N
T
Z
f
t
M
S
Y
100˚
G
L
Q
e
A
F
K
X
m
B
D
J
P
W
d
s
K
m
R
Y
z
S
g
u
M
r
w
H
U
V
c
P
W
Q
S
n
p
z
y
36-12
36-11
A
A
Number of Contacts
48
48
48
Contact Size
16
16
16
S
A
K
P
A
C
K
c
P
U
d
Q
I
S
B
T
L
R
A
R
B
k
B
Q
H
Q
G
F
N
H
L
m
E
N
D
M
D
E
Insert Arrangement
Service Rating
X
Z
L
Y
J
36-13
36-14
36-15
N, P, Q = E; Bal. = A
D
M = D; Bal. = A
Number of Contacts
2
15
5
5
6
35
Contact Size
12
16
8
12 16
16
CONTACT LEGEND
28
16
12
F
G
H
K
F
E
W
g
a
M
G
D
f
b
h
C
C
V
e
j
J
s
x
110° Rotation
of 36-10
A
M
r
w
100° Rotation
of 36-10
J
c
k
z
36-10
N
U
b
j
q
v
Service Rating
P
a
h
u
N
T
Z
g
110˚
G
M
R
f
t
x
F
L
Y
e
m
s
E
K
X
d
k
B
D
J
O
b
j
q
y
N
a
h
v
C
T
Z
p
n
t
G
L
Q
f
A
F
E
X
e
x
B
D
B
C
K
W
c
w
x
A
P
r
t
D
E
J
V
Y
e
e
j
I
O
d
a
p
u
v
y
V
h
k
a
R
Z
d
c
g
s
x
P
X
p
v
r
L
M
U
Z
H
K
M
O
b
f
m
k
t
F
J
W
c
b
C
E
D
I
S
X
a
e
N
T
S
V
S
A
E
G
F
8
4
0
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
C
100˚
H
R
N
d
Z
h
j
c
b
f
k
Y
r
Z
d
h
j
n
u
Y
R
G
y
x
T
N
z
100° Rotation
of 36-7
110° Rotation
of 36-7
100° Rotation
of 36-9
36-16
36-17
36-18
A
A
Service Rating
F
L
X
c
A
Number of Contacts
7
40
7
40
1
2
14 14
Contact Size
12
16
12
16
4
8
12 16
A
C
H
E
J
A B
B
D
F
K
G
L
M
E
L
N
C D
H
F
M
A
K
J
N
P
R
X
S
Y
T
V
b
a
Z
h
e
d
U
j
T
W
a
c
f
U
V
R
c
b
j
g
k
f
v
M
J
i
N
r
T
O
U
V
Y
AC
a
c
d
40-1
D
Number of Contacts
2
2
30
52
6
24
Contact Size
8
12 16
16
12
16
1
C
G
F
H
D
E
I
J
E
U
b
N
V
P
O
Q
X
W
K
R
Y
L
N
S
T
P
j
e
f
l
m
p
q
Z
g
h
i
j
K
L
AR
AZ
BJ
AS
BA
w
AT
BB
BK
BL
BS
BD
BM
BT
BE
BN
BU
r
AA
AL
AW
AV
AU
BC
z
AK
BP
s
29
AB
AM
AX
BF
20
g
q
y
AJ
13
21
30
14
39
22
Service Rating
15
31
40
23
32
41
AY
BH
48
49
58
BR
50
59
16
10
17
11
18
33
25
34
43
26
19
35
44
27
36
45
28
37
46
38
47
67
51
60
68
52
61
69
53
62
70
54
63
71
55
64
72
56
65
73
57
66
74
BV
75
u
76
77
78
83
79
84
40-9
40-56
A
A
D
1
22 24
85
85
Contact Size
8
12 16
16
16
CONTACT LEGEND
80
81
85
48-62
Number of Contacts
29
4
9
24
42
82
Insert Arrangement
3
8
AN
s
t
2
7
W
f
p
x
AH
AF
V
d
n
6
M
U
c
b
m
v
AE
T
a
k
u
AD
AP
n
r
5
D
J
S
Z
i
t
a
o
k
H
R
Y
h
AC
d
c
C
12
X
M
B
F
X
b
e
A
A
S
AF
36-52
B
R
W
Z
A
A
L
P
36-20
Service Rating
G
K
x
w
AB
I
AH
AE
Insert Arrangement
h
q
AD
F
Z
Y
p
AA
z
C
E
S
g
n
u
t
y
m
X
d
m
s
k
W
B
D
H
P
B
C
K
W
b
s
y
H
f
m
p
v
w
z
Insert Arrangement
g
k
r
s
x
f
t
A
P
e
c
b
a
D
E
J
d
X
I
O
V
T
W
e
a
S
R
V
M
U
Z
N
M
U
p m
v
w
P
g
t
u
O
J
I
L
100˚
110˚
G
H
K
X
a
e
n
T
S
W
V
U
E
F
J
S
B
D
C
M
L
P
Y
E
G
I
K
O
A
D
F
16
12
8
4
0
Special
contact arrangements
Requirements for more complex circuits prompted
Amphenol to provide inserts not covered by the MS drawings. Illustrated here and on the following pages are
insert layouts which have from one contact (high tension)
to the 104 contact insert in shell size 44.
Many of these special inserts are also available in alternate keyway arrangements. Please contact Amphenol,
Sidney, NY for additional information on special circuit
application requirements.
front face of pin insert or rear face of socket insert illustrated
M
J
A
L
A
B
A
G
F
C
E
B
C
H
D
P
T
S
K
H
E
G
A
E
D
D
B
D
E
C
C
B
B
F
Insert Arrangement
A
L
R
G
F
A
C
B
C
V
J
D
N
U
K
F
14S-A7
16-59
20-26
20-51
20-57
Service Rating
A
A
A
A
A
Number of Contacts
7
4
19
3*
7*
5
5
Contact Size
16
12
16
8
12 for #14 or 16 wire
12
16
A
E
G
A
C
D
C
P
F
C
F
E
D
H
M
C
N
E
J
B
L
E
M
K
B
B
D
N
D
A
K
H
H
A
B
E
Insert Arrangement
J
A
F
L
F
A
G
C
H
F
C
B
B
A
20-58
D
20-59
20-66
20-79
22-63
22-65
Service Rating
A
A
H = D; Bal. = A
A
H = D; Bal. = A
Number of Contacts
3*
1
5
7*
1*
4
8
8*
8
5
8 for #10 or 12 wire
16
12 for #10 wire
16
12 for #16 wire
12
16
12 for #14 or 16 wire
12
16
Contact Size
L
B
E
C
K
A
D
E
B
D
H
F
J
N
A
K
F
B
D
L
M
E
D
J
Insert Arrangement
H
P
B
M
C
A
A
N
A
22-70
A
C
E
C
C
B
22-80
24-19
24-51
24-52
24-53
Service Rating
A
A
A
Hi-Volt
A
Number of Contacts
3*
12
5*
1
5*
3
3
8 for #10 or 12 wire
16
B, E for AN #10 or 12 wire
A, C, D for AN #8 wire
12
8
8
12 16
Contact Size
CONTACT LEGEND
* Solderless
30
16
24-58
A
12
8
4
7
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
P
L
J
N
K
R
M
H
F
L
A
F
G
E
B
J
B
R
D
C
P
C
J
A
C
M
K
E
L
24-60
24-65
24-66
24-67
A
A
A
D
Inst.
Number of Contacts
7
7
7*
11
4
7
19
Contact Size
12
16
8 for #10 or 12 wire
12
16
12
12
A
F
A
G
E
F
B
E
E
E
B
F
K
B
L
D
D
R
J
N
T
P
S
G
Q
P
B
N
T
U
J
A
C
W X
M
K
Z
L
24-71
24-75
24-79
24-80
24-84
A
A
A
Inst.
A
Service Rating
C
V
H
U
V
C
Insert Arrangement
M
S
R
C
H
90˚
E
C D
G
A
D
D
B
F
A
G
B
N
U
24-59
Service Rating
C
V
T
D
F
P
S
G
C
D
D
Insert Arrangement
G
E
R
H
H
E
B
N
S
D
F
A
F
M
B
90˚
E
A
K
A
Number of Contacts
2*
5*
5
2
5
23
1
Contact Size
8
8 for #10 or 12 wire
8
8 for #16 wire
8
16
12 12 (Coax) RG-188/U
or RG-174/U
16
15
14
12
21
9
4
E
K
C
G
F
M
L
D
N
P
B
P
K
Q
N
M
L
A
H
J
H
R
A
L
N
S
T
B
U
C
D
T
26
8
5
19
20
10
3
25 18
B
A
2
17
28
22 27
11
J
1
24
23
13
18
6
7
R
S
W
X
Y
a
M
V
U
Z
F
C
E
E
D
H
F
J
K
Insert Arrangement
24-96
24-AJ
28-51
28-59
Service Rating
Inst.
A
A
A
Number of Contacts
28
25
12
7
10
Contact Size
16
16
12
12
16
CONTACT LEGEND
* Solderless
31
16
12
8
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
R
P
N
M
T
A
D
S
B
A
N
B
R
M
T
K
P
M
T
K
E
J
B
R
P
L
C
D
A
N
B
R
L
C
E
C
D
K
E
J
D
A
F
T
C
S
J
B
H
H
K
Insert Arrangement
P
L
M
L
A
N
C
S
H
F
S
E
H
F
F
J
28-66
28-72
28-74
28-75
28-79
A
–
A
A
A
Service Rating
Number of Contacts
2
14
3
9*
4*
3*
9*
7*
7
9
Contact Size
8
12
4 (Coax) RG-59A/U
or RG-62A/U
16
8
8 for #10 wire
(S, T, R)
16
8 for #10 wire
8
16
1
13
1
H
2
3
G
F
4
B
A
A
D
B
C
I
5
11
E
F
23
10
5
8
6
7
28-82
28-84
28-AY
32-25
D
A
A
A
Service Rating
Number of Contacts
2
4
9
4
5
25
Contact Size
8
12
8
4
16
12
A
C D
1
16
2
15
3
17
18
14
26
27
25
13
24
23
11
10
19
31
20
29
21
22
8
6
7
9
Y
5
28
30
12
R
4
B
E
L
K
J
S
h
T
j
i
q
b
s
J
C
g
Y
X
W
D
F
E
v
AA
R
F
H
b
j
k
q
T
d
m
i
h
S
c
r
U
f
n
g
V
p s
A
CC
a
Z
H
p
n
z
BB
B
X
P
L
K
f
u
t
y
x
d
m
k
r
w
c
A
P
W
N
M
90˚
H
N
V
U
a
Z
F
M
4
18
20
9
6
Insert Arrangement
15
16
17
22
21
J
D
3
14
24
25
19
H
G
E
2
12
C
B
v
u
t
E
D
C
w
G
90° CW Rotation
of 32-15
Insert Arrangement
Service Rating
32-31
32-48
32-52
32-53
A
Inst.
D
t, u = E; Bal. = Inst.
Number of Contacts
31
48
6
2
5
Contact Size
16
16
12
0
12 16
CONTACT LEGEND
* Solderless
32
16
12
8
37
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
M
T
D
U
c
I
E
F
W
K
R
F
B
32-57
32-58
**
–
Number of Contacts
24
6
6
2
Contact Size
16
12 for #10 wire
12
0 (Coax) RG-71/U
A
G
F
F
H
L
P
M
D
G
N
R
O
X
O
S
c
g
T
W
U
j
p
AD
2
16
Contact Size
4
8
12 16
21
20
19
18
17
16
33
15
32
14
44
Insert Arrangement
M
J
N
AC
P
R
Q
AG
32-68
A
4
8 (Coax) RG-124/U
16
16
4 (Coax) RG-58C/U
1
2
38
46
42
24
26
27
41
28
29
10
1
8
4
4
9
5
25
39
40
11
2
3
D
A
3
45
12
L
12
23
43
30
r
K
54
37
31
E
H
1
35
13
G
2
22
36
34
F
AE
Inst.
1
D
C
v
y
32-64
2
q
AA
**
Number of Contacts
B
f
k
u
x
32-62
Service Rating
W
a
e
AF
Insert Arrangement
A
R
V
t
z
X
8 (Coax) RG-124/U
Z
w
AB
16
J
d
n
s
V
4 (Coax) RG-161/U
or RG-179/U
E
Y
h
m
U
8
P
T
S
b
A
15
M
L
N
32-60
4
H
K
J
I
K
C
D
L
B
A
B
C
E
C
M
A
K
W
D
32-56
Service Rating
V
X
N
G
Insert Arrangement
U
Y
E
B
H
J
T
a
L
S
Z
A
C
C
G
b
X
D
A
S
P
D
H
F
C
B
P
a
e
A
J
V
d
B
E
O
Z
R
A
H
N
Y
8
6
5
9
7
10
11
12
E
6
7
6
2
7
13
8
9
14
15
3
5
17
4
18
16
C
19
B
32-73
32-75
32-76
Service Rating
A
8, 9 = D
A
Number of Contacts
46
2
7
19
4
1
Contact Size
16
12
8 (Coax) RG-180B/U
12
4
8
CONTACT LEGEND
** Consult Amphenol, Sidney, NY for service rating of power contacts.
33
32-79
D
16
12
8
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
D
F
H
K
N
C
X
G
H
K
L
c
n
m
q
AB
y
D
AA
C
q
L
R
32-AF
36-51
A
D
P
M
N
36-54
A
Number of Contacts
4
12
55
2
2
8
31
Contact Size
4
16
16
0
4
8
16
b
a
A
C
X
q
M
N
W
X
c
H
f
p
g
T
L
V
d
Insert Arrangement
Service Rating
P
N
S
T
Z
a
b
n
p
v
i
q
w
j
r
x
s
z
y
AA
AE
AC
k
Y
t
AB
h
L
P
U
g
m
k
p
v
r
B
c
f
t
u
D
X
b
e
d
j
T
S
W
a
n
AF
N
M
R
V
Z
AH
AD
M
J
I
K
A
E
G
H
O
h
B
D
F
U
R
Y
g
L
R
P
f
m
u
J
K
h
S
A
C
K
J
F
n
i
C D
H
F
E
d
t
r
j
D
m
s
k
W
U
E
c
Y
V
A B
B
s
w
x
y
AJ
C
z
36-55
36-59
36-60
36-64
A
A
**
–
Number of Contacts
31
8
50
3
40
7
Contact Size
16
8 for #6 wire
16
12 for #10 wire
16
12 for #10 wire
A B
E
D
B
M
N
V
W
X
c
d
m
u
P
n
g
p
w
y
48
T
U
Z
a
b
i
r
x
j
s
z
AA
F
50
B
55
58
63
67
E
80
61
65
69
73
77
86
AF
75
79
82
83
85
AH
AD
66
70
74
78
81
87
91
88
D
89
90
AJ
Insert Arrangement
64
72
76
57
60
68
71
C
G
52
54
56
59
62
k
t
AB
49
51
53
84
AE
AC
C
A
S
h
q
0 (Coax) RG-11/U,
RG-12/U or RG-13/U
K
J
R
Y
f
v
H
F
L
4
C D
A
J
K
h
B
A
Z
f
p
S
AG
H
g
T
AE
32-82
Service Rating
F
n
i
U
AC
AH
AD
AF
Insert Arrangement
j
v
x
z
R
Q
V
r
u
t
w
P
f
E
d
t
r
k
p
s
J
N
W
e
j
h
D
m
s
k
W
a
d
g
M
R
Z
C
X
V
Y
b
F
P
U
T
E
M
O
S
D
B
c
Y
J
L
A
Z
E
G
b
a
A
B
C
A
36-65
36-71
36-73
Service Rating
–
A
–
Number of Contacts
4
3
50
7
43
1
0 (Coax) RG-59/U, RG-62/U
or RG-71/U
12
16
4 (Coax) RG-62B/U
16
8 (Coax) RG-187/U
Contact Size
CONTACT LEGEND
** Consult Amphenol, Sidney, NY for service rating of power contacts.
34
36-74
A
16
12
8
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
1
31
29
28
27
33
30
26
3
34
36
48
5
6
6
7
38
40
4
9
39
9
8
10
13
47
24
46
23
22
42
45
21
43
13
44
15
20
18
31
14
19
32
33
35
13
G
7
39
4
44
45
17
47
D
6
5
36-75
36-76
36-77
Service Rating
A
A
D
Number of Contacts
48
47
7
2
12
16 for #14 wire
16
4
16
8
Contact Size
1
36-78
A
1
3
4
5
2
3
4
Q
5
F
B
7
8
11
12
13
9
10
6
7
8
14
15
11
12
13
9
10
14
15
A
U
V
W
G
M
h
g
Z
Y
a
16
17
18
19
16
17
18
19
Insert Arrangement
20
K
E
F
X
L
D
20
D
f
m
j
b
C
C
e
k
N
E
B
T
d
c
P
6
S
R
A
2
3
12
C
42
46
Insert Arrangement
E
34
43
19
14
26
30
38
41
2
11
8
21
25
29
37
40
1
9
17
20
24
B
12
16
28
36
F
11
15
23
27
16
8
10
18
11
12
10
A
5
7
14
22
25
2
3
4
37
35
41
1
2
32
G
J
H
36-79
36-80
36-83
36-85
Service Rating
A
A
–
M = D; Bal. = A
Number of Contacts
20
20
7
35
Contact Size
12
12 for #10 wire
4 (Coax) RG-58/U
16 for #12 wire
A
d
z
y
w
g
N
X
M
W
L
c
Z
b
a
U
C
J
s
h
S
D
T
E
G
H
N
j
m
C
n
r
q
B
k
F
V
K
t
Insert Arrangement
R
Y
u
B
P
O
v
f
A
Q
x
e
G
p
36-97
36-AF
40-5
Service Rating
C
A
A
Number of Contacts
1
48
5
4/0
16
0
Contact Size
CONTACT LEGEND
35
16
12
8
4
0
4/0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
16
C
F
G
27
P
Q
M
33
26
12
R
S
T
V
X
W
c
Y
24
a
58
50
8
14
40-35
A
D
40-53
A
Number of Contacts
4
9 16
35
60
Contact Size
4
8 16
12
16
1
1
3
8
9
10
1
2
4
5
11
6
24
7
12
23
13
14
22
15
21
16
17
25
33
18
26
34
42
4
2
50
19
27
35
43
51
20
28
36
44
21
29
37
45
52
22
30
38
46
23
31
39
47
24
48
50
48
35
15
12
A
Number of Contacts
4
1
3
55
60
Contact Size
0
8
12 16
16
21
41
54
40
20
38
28
17
58
16
48
10
12
V
k
b
K
9
33
13
m
8
34
14
c
32
35
15
C
U
D
q
7
31
49
T
j
n
d
L
30
S
i
p
6
47
50
1
B
R
g
f
29
57
36
M
5
46
51
37
A
h
45
59
18
Insert Arrangement
44
61
52
4
56
60
39
A
N
3
27
43
40-62
P
2
26
55
53
19
1
25
11
13
58
40-61
24
X
a
2
E
Z Y
3
F
J
11
4
W
H
40-63
40-64
40-66
Service Rating
A
–
–
Number of Contacts
61
Contact Size
16 for #14 wire
9
10
33
E
42
8
31
32
34
40-57
23
7
30
47
49
Service Rating
22
29
57
58
14
Insert Arrangement
6
45
46
36
16
5
28
56
59
37
59
55
51
18
56
44
60
38
49
4
27
52
17
57
54
39
3
26
43
53
19
41
55
41
20
2
25
42
40
32
40
54
53
3
9
10
11
12
40-10
Service Rating
32
34
13
8
31
33
35
7
30
48
49
36
15
9
46
47
59
37
16
7
22
23
17
b
Z
Insert Arrangement
10
38
51
6
6
60
57
18
21
5
29
52
5
31
11
U
4
28
45
55
56
19
20
32
25
O
53
3
27
44
39
30
35
2
26
43
54
40
20
4
19
L
I
3
29
34
1
25
42
41
21
13
N
22
2
18
14
H
K
24
23
17
28
E
D
J
1
15
A
B
3
20
12 16
13
4
8 (Coax) RG-124/U
CONTACT LEGEND
36
0 (Coax) RG-63B/U
16
12
8
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
N
B
1
P
M
B
W
E
D
F
H
11
C
X
V
K
19
D
S
12
20
28
J
36
J
E
T
U
13
21
29
37
45
22
38
F
M
Insert Arrangement
23
39
41
55
59
40-68
A
A
A
10
21
61
Contact Size
16
4 (Coax) RG-59/U
8
16
A
44
52
57
61
22
42
21
41
54
40
20
C
D
E
J
18
44
28
29
30
57
47
36
16
9
33
34
14
13
3
8
32
35
M
4
48
49
15
L
7
31
58
50
5
6
46
59
37
2
5
45
56
51
17
K
43
6
4
27
61
52
1
3
26
60
39
38
H
2
25
55
53
19
1
24
23
B
10
11
12
40-72
40-73
A
A
Service Rating
43
51
40-70
1
Insert Arrangement
42
27
35
G
Number of Contacts
F
18
26
34
50
56
60
17
25
33
49
40-67
Service Rating
24
40
54
10
16
32
48
58
9
15
31
47
5
8
14
30
46
4
7
53
H
L
K
3
6
R
L
C
2
40-74
A
Number of Contacts
1
10
61
1
1
4
Contact Size
16
4 (Coax) RG-9B/U
16
12
4 (Coax) RG-62/U
0 (Coax) RG-9B/U
or RG-214/U
1
A
1
B
5
6
2
3
7
8
4
9
10
11
5
12
4
20
2
C
E
D
F
H
21
29
37
J
13
22
30
38
46
14
23
31
39
47
24
40
17
25
33
41
49
55
59
16
32
48
54
3
15
26
34
42
50
56
60
18
35
43
51
57
61
19
27
28
36
44
52
45
53
58
62
L
K
M
Insert Arrangement
40-75
40-80
40-81
E
A
A
Service Rating
Number of Contacts
1
4
1
10
62
Contact Size
12
0
16
4
16 for #14 wire
CONTACT LEGEND
37
16
12
8
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
1
5
12
20
6
13
21
2
3
7
14
22
4
8
9
15
23
16
24
17
25
24
23
10
22
11
18
26
27
41
21
19
28
1
53
1
44
28
45
39
29
30
31
32
33
34
35
36
38
39
40
41
42
43
44
47
48
54
49
55
50
56
51
57
52
57
38
51
17
50
60
61
62
14
Insert Arrangement
32
34
13
4
2
9
10
4
3
11
12
3
40-82
40-85
40-86
40-87
Service Rating
A
A
–
D
Number of Contacts
62
60
4
7
Contact Size
16
16 for #14 wire
0(Coax) RG-115A/U
4
20
38
A
37
B
H
9
22
C
7
35
A
2
6
C
M
10
18
G
B
N
21
8
19
36
2
8
31
33
35
15
48
49
36
16
59
58
37
7
30
47
59
53
58
7
46
45
18
46
5
6
60
52
37
5
29
56
19
1
4
27
55
6
3
26
43
54
40
20
2
25
42
D
B
23
3
1
34
A
L
24
11
E
17
5
E
33
D
F
4
16
32
14
29
G
28
40-AD
40-AG
40-AP
A
A
E
Service Rating
F
J
27
30
H
K
26
13
31
Insert Arrangement
25
12
15
40-AR
Inst.
Number of Contacts
4
4
38
2
7
3
3
Contact Size
8
0
12
4/0
12
4
0
31
18
28
35
9
7
27
15
11
3
14
40
34
6
12
25
24
38
39
1
26
17
37
16
5
4
23
13
E
2
25
10
2
1
16
36
8
19
29
17
33
34
32
30
18
P
26
27
28
29
30
31
32
33
35
36
37
38
40
41
42
43
F
A
B
3
19
N
A
4
D
39
20
5
C
20
M
12
24 15
22
13 21
14
Insert Arrangement
22
H
6
21
11
23
C
7
10
9
L
J
K
8
40-AS
40-AT
40-AU
A
A
A
Service Rating
B
G
40-AV
D
Number of Contacts
15
25
24 18
1
3
10
1
3
Contact Size
16
12
12 16
8
4
8
16
2/0
CONTACT LEGEND
38
16
12
8
4
0
2/0
4/0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
30
A
C
L
D
B
E
M
F
N
P
J
R
R
K
S
T
g
f
r
W
AP
Y
h
s
AC
X
t
AD
AR
i
AE
a
j
u
AS
Z
B
k
v
AF
AT
m
w
AU
AJ
n
AV
z
AK
AW
27
AZ
V
BC
BN
BD
BP
BY
BE
BR
BZ
CH
BF
BS
CA
CJ
BH
BT
CB
CK
BJ
BU
CC
CL
CR
BK
BV
CD
CM
BL
BW
CE
CN
23
k
X
c
BX
F
44-52
44-53
A
A
Service Rating
7
8
C
B
36
37
9
11
38
42
13
40
14
16
18 43
10
12
39
44
J
Insert Arrangement
A
45
19
H
K
D
46
21
20
Z
a
L
CS
E
Y
b
CF
CP
47
22
BM
M
35
48
BA
q
49
24
D
j
m
6
25
W
n
d
BB
i
p
f
N
5
34
31
26
C
4
32
52
50
U
g
AB
AN
AM
AY
h
q
AA
AL
AX
P
d
p
y
x
AH
c
33
51
U
b
3
28
T
V
2
1
29
A
S
H
41
17
15
48-51
A
Number of Contacts
104
18
18
42
10
4
Contact Size
16
16
8 (Coax) RG-124/U
16
8
0 (Coax) RG-41/U
31
1
32
2
3
A
30
44
29
A
43
34
5
28
42
51
26
C
D
E
F
G
H
J
6
52
27
B
4
33
45
53
56
7
35
46
K
L
M
N
P
R
8
25
S
B
D
T
U
V
W
X
Z
9
24
23
22
55
50
41
E
48
21
g
j
k
m
n
p
r
s
15
48-52
Service Rating
h
16
17
Insert Arrangement
f
14
C
18
e
d
12
13
19
c
b
10
11
37
38
39
20
47
36
49
40
a
54
48-53
A
D
Number of Contacts
56
5
37
Contact Size
16
0 (Coax) RG-41/U
12
CONTACT LEGEND
39
16
12
8
4
0
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
30
2
1
29
35
28
27
4
33
51
50
32
34
31
26
6
25
49
7
8
24
23
47
22
D
A
C
B
36
46
21
20
11
38
42
45
19
9
18 43
Insert Arrangement
72
67
28
68
55
27
26
25
65
48
51
23
22
49
20
21
16
48-55
A
42 10
4
68
2
2
6
Contact Size
16
0 (Coax) RG-59/U
16 12
8
4
2
1
30
27
4
33
26
27
48
23
47
D
A
C
B
7
8
23
37
42
9
11
10
12
39
13
40
44
47
22
21
20
Insert Arrangement
C
B
7
8
36
37
42
45
19
9
11
13
14
16
18 43
15
41
17
15
48-60
A
A
Number of Contacts
42 10
4
42 10
4
Contact Size
16
0
16
0 (Coax) RG-214/U
8
10
12
39
40
44
48-57
Service Rating
A
38
41
17
D
46
14
16
18 43
35
48
38
45
49
24
36
46
19
6
25
35
5
34
31
26
6
49
24
4
32
52
50
34
31
33
51
5
32
52
50
21
20
3
28
51
22
2
1
29
3
28
25
15
17
18
19
12
13
14
47
52
Number of Contacts
30
46
64
50
53
24
A
29
11
45
63
66
54
48-54
8
10
76
71
15
Service Rating
8
9
41
17
7
44
70
69
14
16
43
75
74
73
6
42
56
13
40
44
10
5
61
62
30
12
39
4
41
78
29
37
39
77
57
31
35
48
58
3
40
1
60
59
33
5
32
52
34
2
38
37
36
3
CONTACT LEGEND
40
8
16
12
8
4
0
QWL – accessories
cabling information
The Amphenol® QWL series of electrical connectors has
been designed with the problems of multi-conductor
cable users in mind. Two of these problems, namely
water proofing and strain relief, are solved by the radial
inward compression of an internal neoprene gland in the
various cable accessories shown on the following pages.
For additional strain relief beyond that provided by the
gland, both cable grips and bar clamps are available.
Since the glands close down from .094” to .145”
(depending on shell size), the optimum condition for
cable users is to select a gland with an I.D. only slightly
larger than the maximum O.D. of the cable. The inside
diameter of the accessory housing determines the maximum diameter of the cable as shown in the tabulation
below. Smaller sizes than those shown in each shell size
can be accommodated by smaller compression glands.
Different cable manufacturers use different constructions
and cable lays in manufacturing multi-conductor cable.
The specific cabling manufacturing specification should
be known by the customer in detail in order to properly
figure each QWL application. This knowledge can save
many individual wire crossovers in any given run of cable.
Crossovers add materially to the cable diameter without a
cable accessory. In those cases where diameter buildup
is impossible to avoid, special cable accessories with
longer barrels are available.
How to order information is covered in detail on pages 4
and 5. In selecting the base number below, care should
be used, as some of the cable accessories are provided
with protection cap attachment rings, while others are
provided with the Kellems strain relief grip as shown. If a
type or cable accommodation size is not found herein
that fulfills your application, please contact Amphenol,
Sidney, NY.
All dimensions for reference only.
Approx. Work Length (Internal)
Minimum Housing
Inner Diameter
Maximum Cable
Outer Diameter
.250
.359
.359
.375
.484
.484
.750-20
.401
.609
.609
16
.875-20
.500
.734
.734
18
1.000-20
1.120
.859
.859
20
1.125-18
1.370
.984
.984
22
1.250-18
1.370
1.109
1.109
24
1.375-18
1.370
1.234
1.234
28
1.625-18
1.370
5.000
1.427
1.427
32
1.875-16
1.370
6.000
1.708
1.708
36
2.062-16
1.370
5.000
1.895
1.895
40
2.312-16
1.370
6.000
2.130
2.130
44
2.625-16
48
2.875-16
Shell
Size
QWL Connector
Accessory Thd.
10
.500-28
12
.625-24
14
Short
2.218
Long
6.000
41
2.375
2.375
2.630
2.630
QWL – cable accessories
10-101332
Short barrel with grip
10-101335
Short barrel with attachment ring
10-101333
Short barrel without grip
10-130380
Short barrel length with attachment
ring & strain relief bars
10-101334
Short barrel with grip & attachment ring
10-113637
Long barrel with attachment ring and grip
42
QWL – accessories
10-130380
cable sealing adapter (with clamp bars)
H
B
F
E
D
LEFT HAND
A
J
G
C
A
SECTION A-A
Type I Straight
C
H
B
F
E
D
LEFT HAND
J
G
Type II Step Down
H
B
F
E
D
LEFT HAND
A
J
G
A
C
SECTION A-A
Type III Step Up
43
QWL – accessories
10-130380
cable sealing adapter (with clamp bars)
All dimensions are for reference only.
Part
Number*
Used
With
Shell
Size
Cable Range
D Thread
Class 2B-LH
E
Free
Max
F
+.010
–.020
G
Dia.
+.010
–.020
Max.
Dia.
H
Max.
J
Max.
10-130380-141
14S
.812
.750-20UNEF
1.125
1.782
.938
3.229
1.062
10-130380-142
I
.938
.750-20UNEF
1.125
2.126
.938
3.573
1.125
III
.875
.938
.750-20UNEF
1.125
2.126
.938
3.573
1.125
III
1.000
1.062
.875-20UNEF
1.250
2.282
1.062
3.854
1.375
III
3.854
1.375
III
3.834
1.125
I
1.688
III
4.677
1.562
III
4.104
1.125
II
4.776
1.688
III
1.188
4.607
1.812
III
1.188
4.365
1.375
I
2.933
1.312
4.677
1.562
I
1.250
2.631
1.312
4.365
1.375
II
1.125-18UNEF
1.250
2.996
1.312
4.740
1.688
III
1.125-18UNEF
1.250
2.933
1.312
4.677
1.562
I
1.250
1.125-18UNEF
1.250
3.062
1.312
4.807
1.812
III
1.062
1.125
1.125-18UNEF
1.250
2.933
1.312
4.677
1.562
I
1.312
1.250
1.125-18UNEF
1.250
3.063
1.312
4.807
1.812
III
.696
1.062
1.250
1.250-18UNEF
1.250
2.933
1.438
4.677
1.562
II
.626
1.062
1.250
1.250-18UNEF
1.250
2.933
1.438
4.677
1.562
II
1.130
1.005
1.780
1.375
1.250-18UNEF
1.500
3.266
1.438
5.250
2.469
III
22
.680
.567
1.312
1.375
1.250-18UNEF
1.250
3.059
1.438
4.803
1.812
III
24
.900
.787
1.312
1.375
1.375-18UNEF
1.250
3.059
1.562
4.803
1.812
I
10-130380-243
24
1.180
1.055
1.780
1.812
1.375-18UNEF
1.500
3.204
1.562
5.198
2.469
III
10-130380-244
24
.680
.567
1.312
1.375
1.375-18UNEF
1.250
3.059
1.562
4.803
1.812
I
10-130380-245
24
.630
.517
1.312
1.375
1.375-18UNEF
1.250
3.059
1.562
4.803
1.812
I
10-130380-246
24
1.000
.875
1.546
1.625
1.375-18UNEF
1.500
3.121
1.562
5.115
2.125
III
10-130380-247
24
.805
.692
1.312
1.375
1.375-18UNEF
1.250
3.059
1.562
4.803
1.812
I
10-130380-281
28
1.310
1.185
1.780
1.875
1.625-18UNEF
1.500
3.184
1.812
5.178
2.469
III
10-130380-282
28
.970
.857
1.312
1.625
1.625-18UNEF
1.250
3.059
1.812
4.803
1.812
II
10-130380-283
28
.880
.755
1.546
1.625
1.625-18UNEF
1.500
3.121
1.812
5.115
2.125
I
10-130380-284
28
1.427
1.320
2.000
1.875
1.625-18UNEF
1.500
3.184
1.812
5.178
2.625
III
10-130380-321
32
.970
.875
1.312
1.875
1.875-16UN
1.250
3.059
2.062
4.803
1.812
II
10-130380-322
32
1.230
1.105
1.780
1.875
1.875-16UN
1.500
3.184
2.062
5.178
2.469
I
10-130380-323
32
1.328
1.240
1.780
1.875
1.875-16UN
1.500
3.184
2.062
5.178
2.469
I
10-130380-324
32
.750
.637
1.312
1.875
1.875-16UN
1.250
3.059
2.062
4.803
1.812
II
10-130380-325
32
1.055
.958
1.546
1.875
1.875-16UN
1.500
3.121
2.062
5.115
2.125
II
10-130380-326
32
1.375
1.250
2.000
2.062
1.875-16UN
1.500
3.246
2.062
5.240
2.625
III
10-130380-361
36
1.310
1.185
1.780
2.062
2.0625-16UN
1.500
3.184
2.312
5.178
2.469
II
10-130380-362
36
1.900
1.775
2.438
2.312
2.0625-16UN
1.625
3.500
2.312
5.619
3.171
III
10-130380-363
36
1.530
1.406
2.000
2.062
2.0625-16UN
1.500
3.246
2.312
5.240
2.625
I
10-130380-364
36
1.445
1.320
2.000
2.062
2.0625-16UN
1.500
3.246
2.312
5.240
2.625
I
10-130380-365
36
.805
.692
1.312
2.062
2.0625-16UN
1.250
3.059
2.312
4.803
1.812
II
10-130380-366
36
.603
.511
1.000
2.000
2.0625-16UN
1.250
2.875
2.312
4.619
1.375
II
10-130380-367
36
1.000
.875
1.546
2.062
2.0625-16UN
1.500
3.121
2.312
5.115
2.125
II
10-130380-401
40
1.730
1.605
2.438
2.500
2.3125-16UN
1.625
3.469
2.562
5.588
3.171
III
10-130380-402
40
1.310
1.185
1.780
2.312
2.3125-16UN
1.500
3.184
2.562
5.178
2.469
II
10-130380-403
40
1.180
1.055
1.780
2.312
2.3125-16UN
1.500
3.184
2.562
5.178
2.469
II
10-130380-404
40
1.109
.984
1.546
2.312
2.3125-16UN
1.500
3.121
2.562
5.115
2.125
II
10-130380-441
44
1.900
1.775
2.438
2.750
2.625-16UN
1.625
4.281
2.875
6.588
3.171
II
Min.
Dia.
B
+.000
–.010
C
+.010
–.000
.460
.366
.750
14S
.438
.344
.875
10-130380-143
14S
.375
.306
10-130380-161
16S
.530
.436
10-130380-162
16S
.605
.511
1.000
1.062
.875-20UNEF
1.250
2.282
1.062
10-130380-171
16
.500
.406
.875
.938
.875-20UNEF
1.125
2.215
1.062
10-130380-181
18
.828
.715
1.188
1.250
1.000-20UNEF
1.250
3.032
1.188
4.776
10-130380-182
18
.699
.605
1.062
1.125
1.000-20UNEF
1.250
2.933
1.188
10-130380-183
18
.500
.406
.875
1.094
1.000-20UNEF
1.125
2.485
1.188
10-130380-184
18
.562
.449
1.188
1.250
1.000-20UNEF
1.250
3.032
1.188
10-130380-185
18
.750
.637
1.312
1.000
1.000-20UNEF
1.250
3.063
10-130380-186
18
.530
.436
1.000
1.062
1.000-20UNEF
1.250
2.621
10-130380-201
20
.625
.531
1.062
1.125
1.125-18UNEF
1.250
10-130380-202
20
.605
.511
1.000
1.125
1.125-18UNEF
10-130380-203
20
.628
.715
1.188
1.125
10-130380-204
20
.720
.626
1.062
1.125
10-130380-205
20
.900
.787
1.312
10-130380-206
20
.625
.531
10-130380-207
20
.750
.637
10-130380-221
22
.790
10-130380-222
22
.720
10-130380-223
22
10-130380-224
10-130380-242
*For complete order number see pages 4 and 5.
44
Type
QWL – accessories
10-10133X
cable sealing adapter
H
E
B
F
K*
OPTIONAL
D
LEFT HAND
A
G
C
A
SECTION A-A
Type I Straight
H
C
B
K*
OPTIONAL
E
F
D
LEFT HAND
G
Type II Step Down
H
B
K*
OPTIONAL
E
F
D
LEFT HAND
A
G
A
*Wire grip dimensions (K) apply to 10-101332 and 10-101334 assemblies only.
45
C
SECTION A-A
Type III Step Up
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
Used
With
Shell
Size
Max.
Dia.
Min.
Dia.
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
Max.
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx.
10-10133X-121
12S
.281
.219
.750
.812
.6250-24NEF
.500
1.938
.812
2.750
2.844
III
10-10133X-122
12S
.500
.406
1.062
1.000
.6250-24NEF
.562
2.875
.812
3.750
4.688
III
10-10133X-123
12S
.405
.316
1.000
.812
.6250-24NEF
.562
2.548
.812
3.422
3.688
III
10-10133X-141
14S
.337
.281
.750
.812
.7500-20UNEF
.500
1.782
.938
2.594
3.344
I
10-10133X-142
14S
.222
.160
.625
.812
.7500-20UNEF
.562
1.782
.938
2.532
2.406
II
10-10133X-143
14S
.281
.219
.750
.812
.7500-20UNEF
.500
1.782
.938
2.594
2.844
I
10-10133X-144
14S
.530
.441
1.000
.812
.7500-20UNEF
.562
2.719
.938
3.594
4.688
III
Part
Number*
Cable Range
Type
10-10133X-145
14S
.463
.406
.875
.938
.7500-20UNEF
.500
2.126
.938
2.938
4.344
III
10-10133X-146
14S
.405
.316
1.000
.812
.7500-20UNEF
.562
2.719
.938
3.594
3.688
III
10-10133X-151
14
.405
.316
1.000
.812
.7500-20UNEF
.562
2.719
.938
3.765
3.688
III
10-10133X-161
16S
.463
.406
.875
.938
.8750-20UNEF
.500
1.844
1.062
2.656
4.344
I
10-10133X-162
16S
.589
.511
1.000
1.062
.8750-20UNEF
.562
2.282
1.062
3.156
5.188
III
10-10133X-163
16S
.625
.580
1.062
1.125
.8750-20UNEF
.562
2.933
1.062
3.807
6.188
III
10-10133X-164
16S
.405
.316
1.000
1.062
.8750-20UNEF
.562
2.282
1.062
3.156
3.688
III
10-10133X-165
16S
.530
.441
1.000
1.062
.8750-20UNEF
.562
2.282
1.062
3.156
4.688
III
10-10133X-166
16S
.699
.605
1.062
1.125
.8750-20UNEF
.562
2.933
1.062
3.807
6.188
III
10-10133X-167
16S
.281
.219
.750
.938
.8750-20UNEF
.500
1.844
1.062
2.656
2.844
II
10-10133X-171
16
.589
.511
1.000
1.062
.8750-20UNEF
.562
2.621
1.062
3.667
5.188
III
10-10133X-172
16
.438
.400
.875
.938
.8750-20UNEF
.500
2.215
1.062
3.199
4.344
I
10-10133X-173
16
.625
.580
1.062
1.125
.8750-20UNEF
.562
2.933
1.062
3.979
6.188
III
10-10133X-174
16
.530
.441
1.000
1.062
.8750-20UNEF
.562
2.621
1.062
3.667
4.688
III
10-10133X-175
16
.405
.316
1.000
1.062
.8750-20UNEF
.562
2.621
1.062
3.667
3.688
III
10-10133X-181
18
.589
.511
1.000
1.062
1.0000-20UNEF
.562
2.621
1.188
3.667
5.188
I
10-10133X-182
18
.625
.580
1.062
1.125
1.0000-20UNEF
.562
2.933
1.188
3.979
6.188
III
10-10133X-183
18
.530
.441
1.000
1.062
1.0000-20UNEF
.562
2.621
1.188
3.667
4.688
I
10-10133X-184
18
.699
.605
1.062
1.125
1.0000-20UNEF
.562
2.933
1.188
3.979
6.188
III
10-10133X-185
18
.405
.316
1.000
1.062
1.0000-20UNEF
.562
2.621
1.188
3.667
3.688
I
10-10133X-186
18
.455
.361
1.062
1.125
1.0000-20UNEF
.562
2.933
1.188
3.979
4.188
III
10-10133X-187
18
.750
.637
1.250
1.000
1.0000-20UNEF
.562
3.063
1.188
4.109
6.688
III
10-10133X-188
18
.172
.078
.750
.938
1.0000-20UNEF
.500
2.407
1.188
3.391
2.844
II
10-10133X-190
18
.805
.692
1.250
1.000
1.0000-20UNEF
.562
3.063
1.188
4.109
6.688
III
10-10133X-201
20
.625
.580
1.062
1.125
1.1250-18NEF
.562
2.933
1.312
3.979
6.188
I
10-10133X-202
20
.699
.605
1.062
1.125
1.1250-18NEF
.562
2.933
1.312
3.979
6.188
I
10-10133X-203
20
.500
.406
1.062
1.125
1.1250-18NEF
.562
2.933
1.312
3.979
4.688
I
10-10133X-204
20
.337
.281
.750
1.125
1.1250-18NEF
.500
2.438
1.312
3.422
3.344
II
10-10133X-205
20
.828
.715
1.125
1.250
1.1250-18NEF
.547
2.996
1.312
4.042
6.688
III
10-10133X-206
20
.375
.312
.875
1.125
1.1250-18NEF
.500
2.469
1.312
3.453
3.844
II
10-10133X-207
20
.281
.219
.750
1.125
1.1250-18NEF
.500
2.438
1.312
3.422
2.844
II
10-10133X-208
20
.455
.361
1.062
1.125
1.1250-18NEF
.562
2.933
1.312
3.979
4.188
I
10-10133X-209
20
.589
.511
1.000
1.125
1.1250-18NEF
.562
2.621
1.312
3.667
5.188
II
10-10133X-210
20
.530
.441
1.000
1.125
1.1250-18NEF
.562
2.621
1.312
3.667
4.688
II
10-10133X-211
20
.900
.791
1.250
1.250
1.1250-18NEF
.562
3.063
1.312
4.109
7.188
III
*For complete order number see pages 4 and 5.
46
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
Part
Number*
Used
With
Shell
Size
Max.
Dia.
Cable Range
Min.
Dia.
B
+.000
–.010
C
+.000
–.010
D Thread
Class 2B-LH
E
Free
±.010
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx.
10-10133X-221
22
.699
.605
1.062
1.250
1.2500-18NEF
.562
2.933
1.438
3.979
6.188
II
10-10133X-222
22
.750
.637
1.250
1.375
1.2500-18NEF
.562
3.059
1.438
4.105
6.688
III
10-10133X-223
22
.445
.367
1.062
1.250
1.2500-18NEF
.562
2.933
1.438
3.979
4.188
II
10-10133X-224
22
1.000
.875
1.500
1.375
1.2500-18NEF
.562
3.121
1.438
4.167
7.188
III
10-10133X-225
22
.828
.715
1.125
1.250
1.2500-18NEF
.594
2.996
1.438
4.072
6.688
I
10-10133X-226
22
.900
.791
1.250
1.375
1.2500-18NEF
.562
3.059
1.438
4.105
7.188
III
10-10133X-227
22
.562
.453
1.125
1.250
1.2500-18NEF
.594
2.996
1.438
4.074
5.188
I
10-10133X-228
22
1.101
.984
1.500
1.375
1.2500-18NEF
.562
3.121
1.438
4.167
7.688
III
10-10133X-229
22
.589
.511
1.000
1.250
1.2500-18NEF
.562
2.750
1.438
3.796
5.188
II
10-10133X-231
22
1.055
.958
1.500
1.375
1.2500-18NEF
.562
3.121
1.438
4.167
7.688
III
10-10133X-241
24
1.000
.875
1.500
1.625
1.3750-18NEF
.562
3.121
1.562
4.167
7.188
III
10-10133X-242
24
.562
.453
1.125
1.406
1.3750-18NEF
.562
2.996
1.562
4.042
5.188
II
10-10133X-243
24
.750
.637
1.250
1.375
1.3750-18NEF
.562
3.059
1.562
4.105
6.688
I
10-10133X-244
24
.900
.791
1.250
1.375
1.3750-18NEF
.562
3.059
1.562
4.105
7.188
I
10-10133X-245
24
1.101
.984
1.500
1.625
1.3750-18NEF
.562
3.121
1.562
4.167
7.688
III
10-10133X-246
24
.405
.316
1.000
1.375
1.3750-18NEF
.562
2.750
1.562
3.796
3.688
II
10-10133X-247
24
.828
.715
1.125
1.406
1.3750-18NEF
.562
2.996
1.562
4.042
6.688
II
10-10133X-248
24
.805
.692
1.250
1.375
1.3750-18NEF
.562
3.059
1.562
4.105
6.688
I
10-10133X-249
24
1.130
1.005
1.750
1.812
1.3750-18NEF
.562
3.204
1.562
4.250
7.188
III
10-10133X-281
28
1.055
.958
1.500
1.625
1.6250-18NEF
.562
3.121
1.812
4.167
7.688
I
10-10133X-282
28
.900
.791
1.250
1.625
1.6250-18NEF
.562
3.059
1.812
4.105
7.188
II
10-10133X-283
28
1.000
.875
1.500
1.625
1.6250-18NEF
.562
3.121
1.812
4.167
7.188
I
10-10133X-284
28
.630
.535
1.250
1.625
1.6250-18NEF
.562
3.059
1.812
4.105
5.688
II
10-10133X-285
28
.750
.637
1.250
1.625
1.6250-18NEF
.562
3.059
1.812
4.105
6.688
II
10-10133X-286
28
1.180
1.099
1.750
1.875
1.6250-18NEF
.562
3.184
1.812
4.230
8.188
III
10-10133X-287
28
1.101
.984
1.500
1.625
1.6250-18NEF
.562
3.121
1.812
4.167
7.688
I
10-10133X-288
28
1.310
1.200
1.750
1.875
1.6250-18NEF
.562
3.184
1.812
4.230
8.688
III
10-10133X-289
28
1.230
1.105
1.750
1.875
1.6250-18NEF
.562
3.184
1.812
4.230
8.188
III
10-10133X-290
28
.880
.755
1.500
1.625
1.6250-18NEF
.562
3.121
1.812
4.167
6.688
I
10-10133X-291
28
.957
.857
1.250
1.625
1.6250-18NEF
.547
3.059
1.812
4.090
7.188
II
10-10133X-292
28
.828
.715
1.125
1.625
1.6250-18NEF
.562
2.954
1.812
4.000
6.688
II
10-10133X-293
28
1.375
1.250
2.000
1.875
1.6250-18NEF
.562
3.184
1.812
4.230
9.688
III
10-10133X-294
28
1.445
1.320
2.000
1.875
1.6250-18NEF
.562
3.184
1.812
4.230
9.688
III
10-10133X-295
28
.805
.692
1.250
1.625
1.6250-18NEF
.562
3.059
1.812
4.105
6.688
II
10-10133X-321
32
.880
.755
1.500
1.875
1.8750-16N
.562
3.121
2.062
4.167
6.688
II
10-10133X-322
32
1.101
.984
1.500
1.875
1.8750-16N
.562
3.121
2.062
4.167
7.688
II
10-10133X-323
32
.750
.637
1.250
1.875
1.8750-16N
.562
3.059
2.062
4.105
6.688
II
10-10133X-324
32
1.445
1.320
2.000
2.062
1.8750-16N
.672
3.246
2.062
4.292
9.688
III
10-10133X-325
32
1.180
1.099
1.750
1.875
1.8750-16N
.562
3.184
2.062
4.230
8.188
I
10-10133X-326
32
.375
.312
.875
1.875
1.8750-16N
.500
2.766
2.062
3.750
3.844
II
10-10133X-327
32
.957
.857
1.250
1.875
1.8750-16N
.562
3.059
2.062
4.105
7.188
II
10-10133X-328
32
1.230
1.105
1.750
1.875
1.8750-16N
.562
3.184
2.062
4.230
8.188
I
10-10133X-329
32
1.530
1.406
2.000
2.062
1.8750-16N
.562
3.246
2.062
4.292
10.688
III
10-10133X-330
32
1.000
.875
1.500
1.875
1.8750-16N
.562
3.121
2.062
4.167
7.188
II
10-10133X-331
32
1.375
1.250
2.000
2.062
1.8750-16N
.562
3.246
2.062
4.292
9.688
III
10-10133X-332
32
1.750
1.875
1.8750-16N
.562
3.184
2.062
4.230
8.688
I
32
(Oval)
1.500
1.875
1.8750-16N
.562
3.121
2.062
4.167
6.688
II
10-10133X-334
32
1.310
.580 x
.825
.500 x
.705
1.200
10-10133X-333
(Oval)
1.500
1.875
1.8750-16N
.562
3.121
2.062
4.167
6.688
II
*For complete order number see pages 4 and 5.
47
Type
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
Part
Number*
Used
With
Shell
Size
Max.
Dia.
Cable Range
Min.
Dia.
B
+.000
–.010
C
+.000
–.010
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx.
Type
10-10133X-335
32
.530
.441
1.000
1.625
1.8750-16N
.562
2.875
2.062
3.921
4.688
II
10-10133X-336
32
.680
.567
1.250
1.875
1.8750-16N
.562
3.059
2.062
4.105
6.688
II
10-10133X-337
32
.463
.406
.875
1.875
1.8750-16N
.500
2.766
2.062
3.750
4.344
II
10-10133X-361
36
1.055
.958
1.500
2.062
2.0625-16N
.562
3.121
2.312
4.167
7.688
II
10-10133X-362
36
1.445
1.320
2.000
2.062
2.0625-16N
.562
3.246
2.312
4.292
9.688
I
10-10133X-363
36
1.530
1.406
2.000
2.062
2.0625-16N
.562
3.246
2.312
4.292
10.688
I
10-10133X-364
36
1.230
1.105
1.750
2.062
2.0625-16N
.562
3.184
2.312
4.230
8.188
II
10-10133X-365
36
.750
.637
1.250
2.062
2.0625-16N
.562
3.059
2.312
4.105
6.688
II
10-10133X-366
36
.880
.755
1.500
2.062
2.0625-16N
.562
3.121
2.312
4.167
6.688
II
10-10133X-367
36
1.656
1.531
2.250
2.312
2.0625-16N
.562
3.308
2.312
4.354
12.688
III
10-10133X-368
36
1.101
.984
1.500
2.062
2.0625-16N
.562
3.121
2.312
4.167
7.688
II
10-10133X-369
36
.957
.857
1.250
2.062
2.0625-16N
.672
3.059
2.312
4.090
7.188
II
10-10133X-370
36
1.900
1.775
2.438
2.312
2.0625-16N
.500
3.500
2.312
4.656
13.688
III
10-10133X-371
36
.375
.312
.875
2.062
2.0625-16N
.500
2.813
2.312
3.797
3.844
II
10-10133X-372
36
1.825
1.700
2.438
2.312
2.0625-16N
.672
3.500
2.312
4.656
13.688
III
10-10133X-373
36
1.375
1.250
2.000
2.062
2.0625-16N
.562
3.246
2.312
4.292
9.688
I
10-10133X-374
36
1.562
1.437
2.250
2.312
2.0625-16N
.562
3.308
2.312
4.354
11.188
III
10-10133X-375
36
1.730
1.605
2.438
2.312
2.0625-16N
.672
3.500
2.312
4.656
13.688
III
10-10133X-376
36
.530
.441
1.000
1.875
2.0625-16N
.562
2.875
2.312
3.921
4.688
II
10-10133X-377
36
1.130
1.005
1.750
2.062
2.0625-16N
.562
3.184
2.312
4.230
7.188
II
10-10133X-378
36
1.180
1.055
1.750
2.062
2.0625-16N
.562
3.184
2.312
4.230
8.188
II
10-10133X-379
36
1.595
1.470
2.250
2.312
2.0625-16N
.562
3.308
2.312
4.354
11.688
III
10-10133X-401
40
1.310
1.200
1.750
2.312
2.3125-16N
.562
3.184
2.562
4.230
8.688
II
10-10133X-402
40
1.656
1.531
2.250
2.312
2.3125-16N
.562
3.308
2.562
4.354
12.688
I
10-10133X-403
40
1.101
.984
1.500
2.312
2.3125-16N
.438
3.121
2.562
4.167
7.688
II
10-10133X-404
40
1.562
1.437
2.250
2.312
2.3125-16N
.562
3.308
2.562
4.354
11.188
I
10-10133X-405
40
1.375
1.250
2.000
2.312
2.3125-16N
.562
3.246
2.562
4.292
9.688
II
10-10133X-406
40
1.180
1.099
1.750
2.312
2.3125-16N
.562
3.184
2.562
4.230
8.188
II
10-10133X-407
40
1.900
1.775
2.438
2.500
2.3125-16N
.672
3.469
2.562
4.625
13.688
III
10-10133X-408
40
1.730
1.605
2.438
2.500
2.3125-16N
.672
3.469
2.562
4.625
13.688
III
10-10133X-409
40
1.825
1.700
2.438
2.500
2.3125-16N
.672
3.469
2.562
4.625
13.688
III
10-10133X-410
40
1.984
1.859
2.438
2.500
2.3125-16N
.672
3.469
2.562
4.625
13.688
III
10-10133X-411
40
1.445
1.320
2.000
2.312
2.3125-16N
.562
3.246
2.562
4.292
9.688
II
10-10133X-412
40
2.062
1.937
2.750
2.500
2.3125-16N
.672
3.500
2.562
4.656
14.188
III
10-10133X-413
40
2.100
1.955
2.750
2.500
2.3125-16N
.672
3.500
2.562
4.656
14.188
III
10-10133X-414
40
2.145
2.000
2.750
2.500
2.3125-16N
.672
3.500
2.562
4.656
14.188
III
10-10133X-415
40
.957
.857
1.250
2.125
2.3125-16N
.562
3.063
2.562
4.109
7.188
II
10-10133X-416
40
1.230
1.103
1.750
2.312
2.3125-16N
.562
3.184
2.562
4.230
8.188
II
10-10133X-417
40
1.055
.958
1.500
2.312
2.3125-16N
.562
3.121
2.562
4.167
7.688
II
10-10133X-418
40
.630
.567
1.250
2.250
2.3125-16UN
.562
3.063
2.562
4.109
6.688
II
10-10133X-441
44
2.170
2.025
2.750
2.625
2.6250-16UN
.672
3.609
2.875
4.953
17.188
III
10-10133X-442
44
2.145
2.000
2.750
2.625
2.6250-16UN
.672
3.547
2.875
4.891
14.188
III
10-10133X-443
44
2.250
2.105
2.750
2.625
2.6250-16UN
.672
3.609
2.875
4.953
17.188
III
10-10133X-445
44
1.130
1.005
1.750
2.625
2.6250-16UN
.562
3.969
2.875
5.203
7.188
II
10-10133X-446
44
1.109
.984
1.500
2.500
2.6250-16UN
.562
3.905
2.875
5.140
7.688
II
10-10133X-449
44
1.445
1.320
2.000
2.562
2.6250-16UN
.562
4.031
2.875
5.265
9.688
II
10-10133X-481
48
1.900
1.775
2.438
2.812
2.8750-16N
.562
3.203
3.125
4.547
13.688
II
10-10133X-482
48
2.000
1.867
2.750
2.969
2.8750-16N
.672
4.281
3.125
5.625
14.188
II
10-10133X-483
48
2.250
2.105
2.750
2.750
2.8750-16N
.672
4.406
3.125
5.750
17.188
I
10-10133X-484
48
2.170
2.025
2.750
2.750
2.8750-16N
.672
4.406
3.125
5.750
17.188
I
*For complete order number see pages 4 and 5.
48
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
H
E
B
F
K
D
LEFT HAND
A
G
C
A
SECTION A-A
Type I Straight
H
C
B
E
F
K*
Optional
D
LEFT HAND
G
Type II Step Down
H
E
B
K*
Optional
F
D
LEFT HAND
A
G
A
C
SECTION A-A
Type III Step Up
49
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
Part
Number*
Used
With
Shell
Size
Max.
Dia.
Cable Range
Min.
Dia.
B
+.000
–.010
C
+.010
–.000
E
Free
±.035
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx.
10-113637-141
14S
.337
.281
.750
.750
.7500-20UNEF
.500
5.282
.938
6.094
3.344
10-113637-142
14S
.405
.316
1.000
I
1.000
.7500-20UNEF
.562
5.500
.938
6.374
3.688
III
10-113637-143
14S
.530
.441
10-113637-144
14S
.463
.406
1.000
1.000
.7500-20UNEF
.562
5.500
.938
6.374
4.688
III
.875
.938
.7500-20UNEF
.500
5.344
.938
6.156
4.344
10-113637-171
16
.699
III
.605
1.062
1.125
.8750-20UNEF
.562
5.563
1.062
6.609
6.188
III
10-113637-172
16
10-113637-181
18
.530
.441
1.000
1.000
.8750-20UNEF
.562
5.500
1.062
6.546
4.688
III
.828
.715
1.125
1.250
1.0000-20UNEF
.562
6.657
1.188
7.703
6.688
10-113637-201
III
20
.750
.637
1.250
1.312
1.1250-18NEF
.562
6.000
1.312
7.046
6.688
III
10-113637-202
20
.984
.875
1.500
1.625
1.1250-18NEF
.562
6.750
1.312
7.796
7.188
III
10-113637-203
20
.900
.791
1.250
1.312
1.1250-18UNEF
.562
6.000
1.312
7.046
7.188
III
10-113637-221
22
.750
.637
1.250
1.312
1.2500-18NEF
.562
6.000
1.438
7.046
6.688
III
10-113637-222
22
.699
.605
1.062
1.312
1.2500-18NEF
.562
5.063
1.438
6.109
6.188
II
10-113637-223
22
1.055
.958
1.500
1.625
1.2500-18NEF
.562
6.750
1.438
7.796
7.688
III
10-113637-224
22
1.828
.715
1.125
1.250
1.2500-18NEF
.562
5.625
1.438
6.671
6.688
I
10-113637-225
22
.589
.511
1.000
1.250
1.2500-18NEF
.562
5.500
1.438
6.546
5.188
II
10-113637-241
24
.957
.857
1.250
1.375
1.3750-18NEF
.562
6.000
1.562
7.046
7.188
I
10-113637-242
24
.750
.637
1.250
1.375
1.3750-18NEF
.562
6.000
1.562
7.046
6.688
I
10-113637-243
24
1.101
.984
1.500
1.625
1.3750-18NEF
.562
6.750
1.562
7.796
7.688
III
10-113637-244
24
1.000
.875
1.500
1.625
1.3750-18NEF
.562
6.750
1.562
7.796
7.188
III
10-113637-245
24
1.180
1.055
1.750
1.812
1.3750-18NEF
.562
6.813
1.562
7.859
8.188
III
10-113637-246
24
.805
.692
1.250
1.375
1.3750-18NEF
.562
6.000
1.562
7.046
6.688
I
10-113637-281
28
1.000
.875
1.500
1.562
1.6250-18NEF
.562
6.750
1.812
7.796
7.188
I
10-113637-282
28
1.900
1.775
2.438
2.438
1.6250-18NEF
.672
8.125
1.812
9.281
13.688
III
10-113637-283
28
1.375
1.250
2.000
2.000
1.6250-18NEF
.562
6.875
1.812
7.921
9.688
III
10-113637-284
28
.750
.637
1.250
1.562
1.6250-18NEF
.562
5.750
1.812
6.796
6.688
II
10-113637-285
28
1.101
.984
1.500
1.562
1.6250-18NEF
.562
6.750
1.812
7.796
7.688
I
10-113637-286
28
1.130
1.005
1.750
1.875
1.6250-18NEF
.562
6.813
1.812
7.859
7.188
III
10-113637-287
28
.900
.791
1.250
1.562
1.6250-18NEF
.562
5.750
1.812
6.796
7.188
II
10-113637-288
28
1.427
1.320
2.000
2.000
1.6250-18NEF
.562
6.875
1.812
7.921
9.688
III
10-113637-289
28
1.180
1.099
1.750
1.875
1.6250-18NEF
.562
6.812
1.812
7.858
8.188
III
10-113637-290
28
1.055
.958
1.500
1.562
1.6250-18NEF
.562
6.750
1.812
7.796
7.688
I
10-113637-291
28
.957
.857
1.250
1.562
1.6250-18NEF
.562
5.750
1.812
6.796
7.188
II
10-113637-292
28
1.310
1.200
1.750
1.875
1.6250-18NEF
.562
6.813
1.812
7.859
8.688
III
10-113637-293
28
.530
.441
1.000
1.625
1.6250-18NEF
.562
6.500
1.812
7.546
4.688
II
10-113637-294
28
1.230
1.105
1.750
1.875
1.6250-18NEF
.562
6.813
1.812
7.859
8.188
III
10-113637-295
28
.630
.535
1.250
1.562
1.6250-18NEF
.562
5.750
1.812
6.796
5.688
II
D Thread
Class 2B-LH
*For complete order number see pages 4 and 5.
50
Type
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
Part
Number*
Used
With
Shell
Size
Max.
Dia.
Cable Range
Min.
Dia.
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx.
Type
10-113637-321
32
.828
.715
1.125
1.844
1.8750-16N
.594
7.625
2.062
8.703
6.688
II
10-113637-322
32
1.310
1.200
1.750
1.812
1.8750-16UN
.562
6.812
2.062
7.858
8.688
I
10-113637-323
32
1.130
1.005
1.750
1.812
1.8750-16UN
.562
6.812
2.062
7.858
7.188
I
10-113637-324
32
1.375
1.250
2.000
2.000
1.8750-16UN
.562
7.875
2.062
8.921
9.688
III
10-113637-325
32
1.445
1.320
2.000
2.000
1.8750-16UN
.562
7.875
2.062
8.921
9.688
III
10-113637-326
32
1.180
1.099
1.750
1.812
1.8750-16UN
.562
6.812
2.062
7.858
8.188
I
10-113637-327
32
1.656
1.531
2.250
2.250
1.8750-16UN
.562
7.141
2.062
8.187
12.688
III
II
10-113637-328
32
.970
.857
1.250
1.844
1.8750-16UN
.562
6.688
2.062
7.734
7.188
10-113637-361
36
1.375
1.250
2.000
2.000
2.0625-16N
.562
6.875
2.312
7.921
9.688
I
10-113637-362
36
1.000
.875
1.500
2.000
2.0625-16N
.562
6.750
2.312
7.796
7.188
II
10-113637-363
36
1.920 x
1.140 oval
1.920 x
1.140 oval
2.438
2.438
2.0625-16N
.672
8.125
2.312
9.281
13.688
III
10-113637-364
36
1.230
1.105
1.750
2.000
2.0625-16N
.562
6.813
2.312
7.859
8.188
II
10-113637-365
36
1.562
1.437
2.250
2.250
2.0625-16N
.562
6.938
2.312
7.984
11.188
III
10-113637-366
36
1.656
1.531
2.250
2.250
2.0625-16N
.562
6.938
2.312
7.984
11.188
III
10-113637-367
36
1.445
1.320
2.000
2.000
2.0625-16N
.562
6.875
2.312
7.921
9.688
I
10-113637-368
36
1.825
1.700
2.438
2.500
2.0625-16N
.672
9.125
2.312
9.281
13.688
III
10-113637-369
36
1.895
1.775
2.438
2.438
2.0625-16N
.672
8.125
2.312
9.281
13.688
III
10-113637-370
36
1.730
1.605
2.438
2.438
2.0625-16N
.672
8.125
2.312
9.281
13.688
III
10-113637-371
36
1.310
1.200
1.750
2.000
2.0625-16N
.562
6.813
2.312
7.859
8.688
II
10-113637-401
40
1.906
1.761
2.750
2.438
2.3125-16N
.672
8.125
2.562
9.281
14.188
III
10-113637-402
40
1.940
1.815
2.438
2.438
2.3125-16N
.672
8.125
2.562
9.281
13.688
III
10-113637-403
40
1.900
1.775
2.438
2.438
2.3125-16N
.672
8.125
2.562
9.281
13.688
III
10-113637-404
40
1.825
1.700
2.438
2.438
2.3125-16N
.672
8.125
2.562
9.281
13.688
III
10-113637-405
40
1.310
1.200
1.750
2.250
2.3125-16N
.562
7.813
2.562
8.859
8.688
II
10-113637-406
40
1.180
1.099
1.750
2.250
2.3125-16N
.562
7.813
2.562
8.859
8.188
II
10-113637-407
40
1.230
1.105
1.750
2.250
2.3125-16N
.562
7.813
2.562
8.859
8.188
II
10-113637-408
40
1.656
1.531
2.250
2.250
2.3125-16N
.562
7.938
2.562
8.984
11.188
I
10-113637-410
40
2.145
2.000
2.750
2.438
2.3125-16N
.672
8.125
2.562
9.281
14.188
III
10-113637-411
40
1.984
1.859
2.438
2.438
2.3125-16N
.672
8.125
2.562
9.281
13.688
III
10-113637-412
40
1.940
1.815
2.438
2.438
2.3125-16N
.672
11.125
2.562
12.281
13.688
III
10-113637-413
40
1.984
1.859
2.438
2.438
2.3125-16N
.672
11.125
2.562
12.281
13.688
III
10-113637-414
40
2.100
1.955
2.750
2.625
2.3125-16N
.672
12.000
2.562
13.156
14.188
III
10-113637-415
40
1.562
1.437
2.250
2.250
2.3125-16N
.562
7.938
2.562
8.984
11.188
I
10-113637-416
40
1.445
1.320
2.000
2.312
2.3125-16N
.562
6.875
2.562
7.921
9.688
II
10-113637-417
40
1.375
1.250
2.000
2.312
2.3125-16N
.562
6.875
2.562
7.921
9.688
II
*For complete order number see pages 4 and 5.
51
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
Part
Number*
Used
With
Shell
Size
Max
Dia
Cable Range
Min
Dia
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia
+.010
–.020
H
±.045
K
Free†
Approx.
Type
10-113637-441
44
2.100
1.955
2.750
2.750
2.6250-16UN
.672
8.125
2.875
9.469
14.188
III
10-113637-442
44
2.250
2.105
2.750
2.875
2.6250-16UN
.672
8.188
2.875
9.531
17.188
III
10-113637-443
44
2.000
1.867
2.750
2.750
2.6250-16UN
.672
8.125
2.875
9.469
14.188
III
10-113637-444
44
1.500
1.375
2.250
2.500
2.6250-16UN
.562
7.938
2.875
9.171
11.188
II
10-113637-445
44
1.730
1.605
2.438
2.750
2.6250-16UN
.672
8.125
2.875
9.469
13.688
II
10-113637-446
44
.750
.637
1.250
2.625
2.6250-16UN
.562
6.688
2.875
7.921
6.688
II
10-113637-447
44
1.825
1.700
2.438
2.750
2.6250-16UN
.672
8.125
2.875
9.469
13.688
II
10-113637-448
44
2.145
2.000
2.750
2.750
2.6250-16UN
.672
8.125
2.875
9.469
14.188
III
10-113637-449
44
2.170
2.025
2.750
2.875
2.6250-16UN
.672
8.188
2.875
9.532
17.188
III
10-113637-450
44
1.375
1.250
2.000
2.625
2.6250-16UN
.562
7.875
2.875
9.109
9.688
II
10-113637-481
48
2.250
2.105
2.750
2.750
2.8750-16N
.672
8.188
3.125
9.532
14.688
I
10-113637-482
48
2.500
2.355
2.875
2.875
2.8750-16N
.672
8.188
3.125
9.532
18.188
III
10-113637-483
48
2.375
2.230
2.875
2.875
2.8750-16N
.672
8.188
3.125
9.532
18.188
III
10-113637-484
48
2.145
2.000
2.750
2.875
2.8750-16N
.672
8.125
3.125
9.469
14.188
II
10-113637-485
48
2.000
1.867
2.750
2.875
2.8750-16N
.672
8.125
3.125
9.469
14.188
II
10-113637-486
48
1.656
1.531
2.250
2.750
2.8750-16UN
.562
7.937
3.125
9.171
12.688
II
*For complete order number see pages 4 and 5.
52
QWL – accessories
adapter, cable clamp
10-113196-XX
adapter
L
D
C
V
F
E
A
10-749XX-( )
cable clamp
Z
W
Y
This cable clamp is designed to be used with specific QWL insert arrangements. The locations,
quantity, and sizes of holes in the clamp grommet must correspond to those in the connector for an
effective moisture seal without wire crossing. Contact Amphenol, Sidney, NY, for grommet availability. Example: 10-107618-4P must use 10-74918-4 clamp.
53
QWL – accessories
adapter, cable clamp, sealing plugs
All dimensions for reference only.
D
Dia.
+.010
–.020
W
Min.
Thd.
Engage
Adapter
Part
Number*
Clamp
Part
Number*
10S
10-113196-10
10-74910-( )
.500-28UNEF
.203
.922
.625
.562
1.234
.500-28UNEF
.519
.807
.529
12S
10-113196-12
10-74912-( )
.625-24NEF
.328
.969
.750
.688
1.281
.625-24NEF
.519
.901
.524
12
10-113196-13
10-74913-( )
.625-24NEF
.328
.954
.750
.688
1.438
.625-24NEF
.519
.901
.524
14S
10-113196-14
10-74914-( )
.750-20UNEF
.453
1.094
.875
.812
1.406
.750-20UNEF
.519
1.026
.524
14
10-113196-15
10-74915-( )
.750-20UNEF
.453
.954
.875
.812
1.438
.750-20UNEF
.519
1.026
.524
A Thread
Class 2A
C
+.010
–.000
E
Dia.
+.010
–.020
Shell
Size
F
±.010
L
±.010
V Thread
Class 2B-LH
Y
Max.
Z
Max.
16S
10-113196-16
10-74916-( )
.875-20UNEF
.578
1.094
1.000
.938
1.406
.875-20UNEF
.519
1.119
.524
16
10-113196-17
10-74917-( )
.875-20UNEF
.578
1.016
1.000
.938
1.500
.875-20UNEF
.519
1.119
.524
18
10-113196-18
10-74918-( )
1.000-20UNEF
.676
1.141
1.188
1.062
1.625
1.000-20UNEF
.519
1.229
.556
20
10-113196-20
10-74920-( )
1.1875-18NEF
.801
1.094
1.312
1.250
1.578
1.125-18NEF
.505
1.479
.666
22
10-113196-22
10-74922-( )
1.1875-18NEF
.906
1.141
1.438
1.250
1.625
1.250-18NEF
.519
1.479
.666
24
10-113196-24
10-74924-( )
1.4375-18NEF
1.016
1.094
1.562
1.500
1.578
1.375-18NEF
.519
1.666
.666
28
10-113196-28
10-74928-( )
1.4375-18NEF
1.130
1.235
1.812
1.500
1.719
1.625-18NEF
.519
1.666
.666
32
10-113196-32
10-74932-( )
1.7500-18NS
1.438
1.204
2.062
1.875
1.688
1.875-16N
.519
2.135
.805
36
10-113196-36
10-74936-( )
2.000-18NS
1.678
1.266
2.250
2.125
1.750
2.0625-16N
.738
2.260
.805
40
10-113196-40
10-74940-( )
2.2500-16UN
1.914
1.266
2.500
2.375
1.750
2.3125-16N
.738
2.510
.805
*For complete order number see page 5. Clamp 10-749XX-( ) has a bright cadmium finish. An olive drab cadmium plate finish is available
by order number 71-749XX-( ). To complete clamp order number, add connector insert arrangement number.
B
DIA
C
.135 +.030
–.025
A
DIA
45 ˚
SEALING PLUG
MS27488-XX
10-405996-XX
Color
Code
B
±.005
C
±.010
A
Dia.
±.010
Order No.
Contact
Size
MS
Number
Wire
Size
10-405996-16
16
27488-16
20-16
Blue
.133
.564*
.083
10-405996-12
12
27488-12
14-12
Yellow
.171
.564*
.121
10-405996-8
8
27488-8
10-8
White
.315
.470
.185
10-405996-4
4
27488-4
4-6
Blue
.415
.470
.310
10-405996-0
0
27488-0
0-2
Yellow
.605
1.000
.440
*±.020
Sealing plugs are used to fill unused holes in multi-holed grommet configurations
54
QWL – accessories
adapter, cable clamp
10-113138-XX
adapter
L
C
D
V
LEFT HAND
F
E
A
B
M85049/2-( )C
cable clamp
M
Y
K
55
A
QWL – accessories
adapter, cable clamp, sleeve
Shell
Size
12
14
16
18
Adapter
Part
Number*
Clamp
MS Part
Number*
A Thread
Class 2A
(Plated)
B Min
Full
Thd
C Dia
+.000
–.010
D
±.020
E Dia
+.010
–.020
F
±.010
10-113138-12
M85049/2-4C
.625-24UNEF
10-113138-13
M85049/2-4C
.625-24NEF
.422
.386
1.078
.750
.688
.422
.386
1.125
.750
.688
10-113138-14
M85049/2-6C
10-113138-15
M85049/2-6C
.750-20UNEF
.422
.500
1.078
.875
.812
.750-20UNEF
.422
.500
1.125
.875
.812
10-113138-16
10-113138-17
M85049/2-8C
.875-20UNEF
.422
.625
1.078
1.000
.938
M85049/2-8C
.875-20UNEF
.422
.625
1.125
1.000
.938
10-113138-18
M85049/2-10C
1.000-20UNEF
.422
.752
1.125
1.188
1.062
K Dia
Cable Range
Free
Closed
.302
.094
.428
.230
.515
.316
.614
.378
L
Max
V
Thread
Class 2B-LH
M
Max
1.390
1.609
1.390
1.609
1.390
1.609
1.609
1.375
1.375
1.375
1.437
.625-24NEF
.625-24NEF
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
Y
Max
.906
1.031
1.125
1.234
20
10-113138-20
M85049/2-12C
1.1875-18UNEF
.422
.891
1.125
1.312
1.250
.738
.445
1.609
1.437
1.125-18NEF
1.484
22
10-113138-22
M85049/2-12C
1.1875-18NEF
.422
.891
1.125
1.438
1.250
.738
.445
1.609
1.437
1.250-18NEF
1.484
24
10-113138-24
M85049/2-16C
1.4375-18UNEF
.422
1.111
1.125
1.562
1.500
.926
.611
1.609
1.562
1.375-18NEF
1.671
28
10-113138-28
M85049/2-16C
1.4375-18NEF
.422
1.111
1.297
1.812
1.500
.926
.611
1.781
1.562
1.625-18NEF
1.671
32
10-113138-32
M85049/2-20C
1.750-18UNS
.484
1.422
1.297
2.062
1.875
1.200
.922
1.781
1.812
1.875-16UN
2.188
36
10-113138-36
M85049/2-24C
2.000-18UNS
.562
1.672
1.297
2.250
2.125
1.363
.922
1.781
2.062
2.0625-16N
2.344
40
10-113138-40
M85049/2-28C
2.250-16UN
.562
1.914
1.297
2.500
2.375
1.611
1.180
1.781
2.062
2.3125-16N
2.594
44
10-113138-44
M85049/2-32C
2.500-16UN
.562
2.142
1.297
2.812
2.625
1.865
1.427
1.781
2.188
2.625-16UN
2.812
MS3420-(
sleeve
)A
2.000 ± .031
Z Dia
Shell
Size
Sleeve
MS Part
Number
D
Dia.
±.016
Free
±.016
Closed
12
MS3420-4A
.302
.219
.010
14
MS3420-4A
MS3420-6A
.302
.427
.219
.312
.020
.114
16
MS3420-6A
MS3420-8A
.427
.531
.312
.438
.085
.220
18
MS3420-6A
MS3420-10A
.427
.615
.312
.438
.085
.200
20
MS3420-10A
MS3420-12A
.615
.740
.438
.541
.177
.270
22
MS3420-10A
MS3420-12A
.615
.740
.438
.541
.177
.270
24
MS3420-8A
MS3420-12A
MS3420-16A
.531
.740
.927
.438
.541
.750
.186
.260
.433
26
MS3420-8A
MS3420-12A
MS3420-16A
.531
.740
.927
.438
.541
.750
.186
.260
.433
32
MS3420-12A
MS3420-16A
MS3420-20A
.740
.927
1.240
.541
.750
.938
.273
.442
.620
36
MS3420-16A
MS3420-20A
MS3420-24A
.927
1.240
1.365
.750
.938
1.125
.358
.504
.682
40
MS3420-16A
MS3420-20A
MS3420-28A
.927
1.240
1.614
.750
.938
1.250
.368
.514
.816
44
MS3420-20A
MS3420-28A
MS3420-32A
1.240
1.614
1.865
.938
1.250
1.625
.638
.897
1.229
Z
D
Sleeve not supplied as part of MS3057-( )C assembly.
Order separately by part number shown.
56
QWL – accessories
protection caps
10-101046-( ), 10-101531-(
plug protective covers
)
10-101046
L
E
F
C
A
10-101531
B
10-101063-( ), 10-101048-( )
receptacle protective covers
10-101063
E
L
A
D
C
10-101048
B
57
QWL – accessories
protection caps
All dimensions for reference only.
A Thread
Class 2A
B
Dia
+.010
–.000
C
Approx.
E
Approx.
F
Flat
±.010
L
Max.
10-101531-10
.6250-0.05P-0.1L-DS
.125
3.000
3.375
.500
1.250
10-101531-12
.7500-0.1P-0.2L-DS
.125
3.500
3.875
.625
1.438
10-101046-14
10-101531-14
.8750-0.1P-0.2L-DS
.125
3.500
3.875
.750
1.438
16
10-101046-16
10-101531-16
1.0000-0.1P-0.2L-DS
.140
3.500
3.875
.875
1.438
18
10-101046-18
10-101531-18
1.1250-0.1P-0.2L-DS
.140
3.500
4.000
1.000
1.438
20
10-101046-20
10-101531-20
1.2500-0.1P-0.2L-DS
.193
4.000
4.500
1.062
1.438
22
10-101046-22
10-101531-22
1.3750-0.1P-0.2L-DS
.193
4.000
4.500
1.125
1.438
24
10-101046-24
10-101531-24
1.5000-0.1P-0.2L-DS
.193
4.500
5.000
1.250
1.438
28
10-101046-28
10-101531-28
1.7500-0.1P-0.2L-DS
.193
4.500
5.000
1.500
1.438
32
10-101046-32
10-101531-32
2.0000-0.1P-0.2L-DS
.193
5.000
5.500
1.750
1.438
36
10-101046-36
10-101531-36
2.2500-0.1P-0.2L-DS
.193
5.000
5.500
2.000
1.438
40
10-101046-40
10-101531-40
2.5000-0.1P-0.2L-DS
.193
5.000
5.500
2.250
1.438
44
10-101046-44
10-101531-44
2.7500-0.1P-0.2L-DS
.193
6.000
6.000
2.500
1.438
48
10-101046-48
10-101531-48
3.0000-0.1P-0.2L-DS
.193
6.000
6.000
2.750
1.438
B
Dia.
+.010
–.000
C
Approx.
D
Dia.
Max.
E
Approx.
L
Max.
Shell
Size
Without
Eyelet End
Part Number*
With
Eyelet End
Part Number*
10
10-101046-10
12
10-101046-12
14
*For complete order number see page 5.
All dimensions for reference only.
Shell
Size
Without
Eyelet End
Part Number*
With
Eyelet End
Part Number*
A Thread
Class 2B
10
10-101063-10
10-101048-10
.6250-0.05P-0.1L-DS
.140
3.000
.844
3.375
.750
12
10-101063-12
10-101048-12
.7500-0.1P-0.2L-DS
.140
3.500
.969
3.875
.750
14
10-101063-14
10-101048-14
.8750-0.1P-0.2L-DS
.140
3.500
1.094
3.875
.750
16
10-101063-16
10-101048-16
1.0000-0.1P-0.2L-DS
.140
3.500
1.219
3.875
.750
18
10-101063-18
10-101048-18
1.1250-0.1P-0.2L-DS
.193
3.500
1.344
4.000
.969
20
10-101063-20
10-101048-20
1.2500-0.1P-0.2L-DS
.193
4.000
1.469
4.500
.969
22
10-101063-22
10-101048-22
1.3750-0.1P-0.2L-DS
.193
4.000
1.562
4.500
.969
24
10-101063-24
10-101048-24
1.5000-0.1P-0.2L-DS
.193
4.500
1.688
5.000
.969
28
10-101063-28
10-101048-28
1.7500-0.1P-0.2L-DS
.193
4.500
1.938
5.000
.969
32
10-101063-32
10-101048-32
2.0000-0.1P-0.2L-DS
.193
5.000
2.219
5.500
.969
36
10-101063-36
10-101048-36
2.2500-0.1P-0.2L-DS
.193
5.000
2.469
5.500
.969
40
10-101063-40
10-101048-40
2.5000-0.1P-0.2L-DS
.193
5.000
2.719
5.500
.969
44
10-101063-44
10-101048-44
2.7500-0.1P-0.2L-DS
.193
6.000
2.969
6.000
.969
48
10-101063-48
10-101048-48
3.0000-0.1P-0.2L-DS
.193
6.000
3.219
6.000
.969
*For complete order number see page 5.
58
QWL – accessories
flange gasket, grip banding clamp
R
(TP)
.031 ± ,010 (10-36675)
.031 ± .005 (10-40450)
10-36675-( )
10-40450-( )
flange gaskets
R
(TP)
S
T
4 HOLES
F
All dimensions for reference only.
Part
Number*
Part
Number*
Shell
Size
F
Dia.
+.016
–.000
10-36675-10
10-40450-10
10
.625
.719
1.000
.172
10-36675-12
10-40450-12
12
.750
.813
1.094
.172
10-36675-14
10-40450-14
14
.875
.906
1.188
.172
10-36675-16
10-40450-16
16
1.000
.969
1.281
.172
10-36675-18
10-40450-18
18
1.125
1.063
1.375
.203
10-36675-20
10-40450-20
20
1.250
1.156
1.500
.203
10-36675-22
10-40450-22
22
1.375
1.250
1.625
.203
10-36675-24
10-40450-24
24
1.500
1.375
1.750
.203
10-36675-28
10-40450-28
28
1.750
1.563
2.000
.203
10-36675-32
10-40450-32
32
2.000
1.750
2.250
.219
10-36675-36
10-40450-36
36
2.188
1.938
2.500
.219
10-36675-40
10-40450-40
40
2.438
2.188
2.750
.219
10-36675-44
10-40450-44
44
2.688
2.375
3.000
.219
10-36675-48
10-40450-48
48
2.938
2.625
3.250
.219
R
±.010
S
+.016
–.000
T
Dia.
±.010
*For complete order number see page 5.
All dimensions for reference only.
10-183249-( )
grip banding clamp
.375
REF.
A
A Dia.
Part
Number*
Max.
Min.
10-183249-10
1.125
.812
10-183249-11
1.312
.938
10-183249-12
1.500
1.125
10-183249-13
1.688
1.312
10-183249-14
1.875
1.500
10-183249-15
2.062
1.688
10-183249-16
2.250
1.875
10-183249-17
2.438
2.062
10-183249-18
2.625
2.250
10-183249-19
2.812
2.438
10-183249-20
3.000
2.625
*For complete order number see page 5.
59
QWL
crimp contacts
Machined from copper alloy and silver-plated for maximum corrosion resistance, with a
minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12
socket contacts are of the closed entry design. Crimp contacts are available for all MS
insert arrangements and are identified with an Amphenol® proprietary number.
MS/STANDARD CRIMP CONTACTS
Part
Number
10-40553
Pin/
Socket
Pin
10-40552 or
10-597109-161 Socket
10-40557
16
Short†
16
Pin
10-40556 or
10-597109-171 Socket
10-40561
Mating Wire
Barrel
End
Size
Size
16
Long
16
Pin
10-40560 or
10-597109-131 Socket
Allowable
Wire
Size
16
18
20
22*
16
18
20
22*
Test
Required
Wire Adapter Current**
Amps
Sleeve
10-74696-6
10-74696-6
12
12
13
10
7.5
5
Mechanical
Spacing
Nom.
AC (RMS)
200
1/16
13
10
7.5
5
A
700
500
1/8
1/16
D
1250
900
3/16
1/8
E
1750
1250
1/4
3/16
23
B
2450
1750
5/16
1/4
C
4200
3000
1
5/16
Pin
Socket
8
8
8
10*
10-74696-1
46
33
10-40564
10-40565
Pin
Socket
4
4
4
6*
10-74696-2
80
60
10-40562 or
10-581806
10-40563 or
10-581808
Pin
0
0
2*
Effective
Creepage
Distance
Nom.
DC
10-40792
10-40793
Socket
Recommended
Operating Voltage*
at Sea Level
250
* The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed
the operating voltages listed here. If this is necessary, designers will find
Table II useful for determining the degree to which the recommended values of Table I can be exceeded.
17
0
MS
Service
Rating
Inst.
12
14
TABLE I
CONTACT ARRANGEMENT SERVICE RATING
150
10-74696-7
100
* When using wire adapter sleeve shown.
** Contact ratings as stated are test ratings only. The connector could not withstand full
rated current through all contacts continuously. Please note that the electrical data
given is not an establishment of electrical safety factors. This is left entirely in the
designer’s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
† The 12S, 14S and 16S connectors require short contacts.
TABLE II
ALTITUDE VOLTAGE DERATING** CHART
Nominal
Distance
MS
Service
Rating
Airspace
Standard Sea
Level Conditions
Creepage
Minimum
Flashover
Voltage
AC (RMS)
Pressure Altitude†
50,000 Feet
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Pressure Altitude†
70,000 Feet
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst.
1/32
1/16
1400
1000
500
400
325
260
A
1/16
1/8
2800
2000
800
600
450
360
D
1/8
3/16
3600
2800
900
675
500
400
E
3/16
1/4
4500
3500
1000
750
550
440
B
1/4
5/16
5700
4500
1100
825
600
480
C
5/16
1
8500
7000
1300
975
700
560
† Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer
must determine his own operating voltage by the application of a safety factor to
the above derating chart to compensate for circuit transients, surges, etc.
60
QWL
solder contacts
Machined copper alloy contacts in a full range of sizes, with closed entry
socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder contacts for maximum corrosion
resistance, maximum current carrying capacity and low millivolt drop.
MS/STANDARD SOLDER CONTACTS*
Part
Number
Pin/
Socket
10-40569
Pin
10-597107-161
Socket
10-40599
Pin
10-597107-171
Socket
Wire
Barrel
Size
Mating
End
Size
16
Short†
16
16 Long
10-33646
Pin
10-597107-131
Socket
10-35531
Pin
10-35532
Socket
10-35529
Pin
10-35530
Socket
Pin
10-35528
Test
Current**
Amps
13
10
7.5
5
16
18
20
22
12
14
23
17
8
8
8
10
46
33
4
4
4
6
80
60
0
0
0
1
2
150
125
100
Socket
MS
Service
Rating
13
10
7.5
5
16
18
20
22
12
12
10-35527
16
Allowable
Wire
Size
TABLE I
CONTACT ARRANGEMENT SERVICE RATING
Recommended
Operating Voltage*
at Sea Level
DC
AC (RMS)
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.
Inst.
250
200
1/16
A
700
500
1/8
1/16
D
1250
900
3/16
1/8
E
1750
1250
1/4
3/16
B
2450
1750
5/16
1/4
C
4200
3000
1
5/16
* The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed
the operating voltages listed here. If this is necessary, designers will find
Table II useful for determining the degree to which the recommended values of Table I can be exceeded.
* Solder Wells Filled
** Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the
electrical data given is not an establishment of electrical safety factors. This is
left entirely in the designer’s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit.
† The 12S, 14S and 16S connectors require short contacts.
TABLE II
ALTITUDE VOLTAGE DERATING** CHART
Nominal
Distance
MS
Service
Rating
Airspace
Standard Sea
Level Conditions
Creepage
Minimum
Flashover
Voltage
AC (RMS)
Pressure Altitude†
50,000 Feet
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Pressure Altitude†
70,000 Feet
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst.
1/32
1/16
1400
1000
500
400
325
260
A
1/16
1/8
2800
2000
800
600
450
360
D
1/8
3/16
3600
2800
900
675
500
400
E
3/16
1/4
4500
3500
1000
750
550
440
B
1/4
5/16
5700
4500
1100
825
600
480
C
5/16
1
8500
7000
1300
975
700
560
† Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc.
61
QWL
application tools (crimp type)
Complete installation instructions (L-516) for Amphenol®
QWL Series Connectors are available on request.
The following data includes information pertaining to the
application tools which have been established for crimping,
inserting and removing crimp contacts used in QWL
Series Connectors.
Contact Crimping, Insertion & Removal Tools
Crimping
Tool
Positioner/
Turret
Contact
Size
Contact
Style
Insertion
Tool
Removal
Tool
M22520/1-01
*
16
Pin & Socket
11-7345
11-8250 Kit
M22520/1-01
*
12
Pin & Socket
11-7082
11-8250 Kit
*
*
8
Pin & Socket
11-8220
11-8250 Kit
*
*
4
Pin & Socket
11-7365-4†
Pin11-7370-4†
Socket 11-7674-2†
*
*
0
Pin & Socket
11-7365-5†
Pin 11-7370-5†
Socket 11-7674-3†
*Refer to tool manufacturers for appropriate crimp tools or positioner/turret.
†Tools used with Arbor press 11-7364.
62
QWL
thermocouple contacts
Available from Amphenol is a complete line of cylindrical connectors featuring thermocouple contact insert arrangements.
The design of these contacts is such that standard shell components and resilient inserts are used in the assemblies. Thermocouple contacts are available in all arrangements which
contain size 12 and 16 pins and sockets, and feature probeproof, closed entry design for the socket contacts. MSapproved and other commercial arrangements may be ordered
with thermocouple contacts substituted for the standard contacts. All thermocouple contact layouts may contain either iron,
alumel, chromel, constantan, standard (copper) or brass
(dummy) contacts. The resulting assembly will be identified
with an Amphenol® part number.
IDENTIFICATION
For the purpose of wiring identification, thermocouple contacts are
marked in accordance with the following color code which agrees with
the wire code.
Chromel. . . . . . . White
Alumel . . . . . . . Green
Iron . . . . . . . . Black
Constantan . . . . . Yellow
This identification is made by means of small dots of stain on solder
well end of the contact and is in accordance with the listing shown
above.
WIRE WELL DATA
Contact Size
Well Inside
Diameter
Well
Depth
12
16
+.004
–.002
.125
.094
+.031
–.000
.250
.188
Solder Well
Barrel
.166±.003
.125
+.002
–.004
Outside Diameter
RECOMMENDED WIRE:
I
Chromel – Alumel:
Use wire in accordance with AN-W-29
II Iron – Constantan:
Use wire in accordance with AN-W-8b
63
QWL
thermocouple arrangements
drawings to prevent cross plugging. Available thermocouple arrangements are tabulated on the following pages.
Please contact your local sales office or Sidney, NY for
additional information regarding thermocouple arrangements particular to your application.
Military connector specifications do not provide for thermocouple contact usage in established MS inserts. Amphenol® has established a series of insert arrangements
containing thermocouple contacts. Some inserts have
been rotated into positions outside those covered by MS
The following abbreviations are used in the contact material column:
Abbreviation
Ir.
Con.
Cu.
Ch.
Al.
Dummy
Material
Iron
Constantan
Copper
Chromel
Alumel
Brass
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
Total
Contacts
12S-51
12S-3
12S-54
12S-3
12S-55
12S-3
Contact
Size
16
Pin Insert
Rotation
C/W
2
2
315°
2
2
315°
A = Ir.; B = Con.
2
2
45°
A = Cu.; B = Con.
12
Contact Material
A = Ch.; B = Al.
12S-56
12S-3
2
2
None
A = Al.; B = Ch.
12S-57
12S-3
2
2
60°
A = Ch.; B = Al.
12S-58
12S-3
2
2
120°
A = Ir.; B = Con.
12S-59
12S-3
2
2
None
A = Ir.; B = Con.
12S-60
12S-3
2
2
None
A = Cu.; B = Con.
12S-61
12S-3
2
2
None
A = Ch.; B = Con.
12S-62
12S-3
2
2
None
A = Ch.; B = Al.
12S-64
12S-3
2
2
315°
A = Cu.; B = Con.
12S-65
12S-3
2
2
None
A = Con.; B = Ir.
14S-51
14S-9
2
2
90°
A = Al.; B = Ch.
14S-52
14S-2
4
4
45°
A, B = Cu.; C = Al.; D = Ch.
14S-53
14S-9
2
2
90°
A = Ir.; B = Con.
14S-54
14S-6
6
6
45°
A, C, E = Ir.; B, D, F = Con.
14S-55
14S-2
4
4
45°
A, C = Ir.; B, D = Con.
14S-56
14S-2
4
4
45°
A = Ir.; B = Con.; C, D = Cu.
14S-57
14S-2
4
4
45°
A, C = Al.; B, D = Ch.
14S-58
14S-7
3
3
45°
A = Al.;B = Ch.;C = Cu.
14S-59
14S-9
2
2
90°
A = Cu.; B = Con.
14S-60
14S-9
2
2
*
14S-61
14S-6
6
6
45°
A = Al.; B = Ch.
14S-63
14S-6
6
6
*
A, C = Al.; B, D = Ch.; E = Ir.; F = Con.
14S-64
14S-2
4
4
*
A, C = Con.; B, D = Cu.
14S-65
14S-6
6
6
*
A, C, E = Cu.; B, D, F = Con.
14S-67
14S-6
6
6
*
A = Al.; B = Ch.; Bal = Cu.
14S-68
14S-2
4
4
45°
14S-69
14S-7
3
3
*
A = Con.; B = Ch.; C = Cu.
14S-70
14S-2
4
4
*
A, D = Ch.; B, C = Al.
14S-71
14S-2
4
4
*
A, B, D = Cu.; C = Con.
14S-72
14S-9
2
2
*
A = Con.; B = Cu.
14S-73
14S-2
4
4
*
A, B = Cu.; C = Al.; D = Ch.
A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
A = Ch.; B = Con.; C, D = Cu.
†Insert arrangements including the letter “S” are available in QWL Series Connectors only.*No rotation required.
64
QWL
thermocouple arrangements (Cont’d.)
Contact
Size
16
Pin Insert
Rotation
C/W
4
4
*
A, B = Ch.; C, D = Al.
4
4
*
A, B = Cu.; C, D = Con.
14S-2
4
4
*
A, C = Al.; B, D = Ch.
14S-77
14S-2
4
4
*
A, D = Al.; B, C = Ch.
14S-78
14S-9
2
2
*
A = Ch.; B = Al.
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
Total
Contacts
14S-74
14S-2
14S-75
14S-2
14S-76
12
Contact Material
14S-79
14S-5
5
5
*
A, B, E = Cu.; C = Al.; D = Ch.
14S-80
14S-9
2
2
*
A = Cu.; B = Con.
14S-81
14S-9
2
2
*
A = Al.; B = Cu.
14S-82
14S-2
4
4
*
A = Ir.; B = Con.; C = Ch.; D = Al.
14S-83
14S-6
6
6
*
A, C = Ir.; B, D = Con.; E, F = Cu.
14S-84
14S-6
6
6
*
A, B = Al.; Bal = Cu.
14S-85
14S-7
3
3
*
A = Ch.; B = Al.; C = Cu.
14S-86
14S-6
6
6
*
A, F = Ir.; B, E = Con.; C, D = Cu.
14S-87
14S-6
6
6
*
14S-88
14S-9
2
2
90°
A, B, C, D = Ir.; E, F = Con.
A = Ch.; B = Con.
14S-89
14S-7
3
3
*
A = Ir.; B = Cu., C = Con.
14S-90
14S-6
6
6
*
A = Al.; C = Ch.; Bal. = Cu.
14S-91
14S-2
4
4
*
A = Al.; B = Ch.; Bal. = Cu.
14S-93
14S-6
6
6
*
A, B, F = Al.; D, C, E = Ch.
14-59
14-53
6
6
*
A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
16S-52
16S-4
2
2
*
A = Ch.; B = Al.
16S-54
16S-1
7
7
*
A = Al.; B = Ch.; Bal. = Cu.
A = Con.; Bal. = Cu.
16S-55
16S-1
7
7
*
16S-56
16S-1
7
7
*
A = Al.; D = Ch.; Bal. = Cu.
16S-57
16S-1
7
7
*
A, B = Al.; C, D = Ch.; Bal. = Cu.
16S-58
16S-1
7
7
*
A, G = Al.; Bal. = Ch.
16S-59
16S-1
7
7
*
A, C = Ir.; B, D = Con.; Bal. = Cu.
16S-60
16S-1
7
7
*
A = Ir.; B = Con.; Bal. = Cu.
16S-61
16S-1
7
16-52
16-11
2
7
2
*
90°
2
G = Al.; Bal. = Ch.
A = Al.; B = Ch.
16-53
16-9
4
2
70°
A = Al.; C = Ch.; B, D = Cu.
16-55
16-10
3
3
45°
A = Al.; B = Ch.; C = Cu.
16-56
16-13
2
2
90°
A = Con.; B = Cu.
16-57
16-10
3
3
*
A = Al.; B = Cu.; C = Ch.
16-58
16-10
3
3
*
A = Con.; B, C = Cu.
16-60
16-13
2
2
*
A = Al.; B = Ch.
16-62
16-11
2
2
*
A = Con.; B = Cu.
16-67
16-11
2
2
*
A = Al.; B = Ch.;
16-68
16-9
4
2
18-51
18-12
6
18-52
18-11
5
18-53
18-12
6
18-54
18-15
4
18-56
18-1
10
10
45°
A, C, E, G, I = Ir.; B, D, F, H, J = Con.
18-57
18-12
6
6
45°
A, C, E = Al.; B, D, F = Ch.
18-59
18-12
6
6
45°
A, C = Ir.; B, E, F = Con.; D = Cu.
2
*
A, B, C = Ch.; D = Al.
6
*
A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
*
A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy
*
A, D = Ir.; B, E = Con.; C, F = Dummy
5
6
4
*
A, C = Al.; B, D = Ch.
†Insert arrangements including the letter “S” are available in QWL Series Connectors only.
65
*No rotation required.
QWL
thermocouple arrangements (Cont’d.)
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
Contact
Size
Total
Contacts
12
5
16
Pin Insert
Rotation
C/W
45°
Contact Material
18-60
18-11
5
18-61
18-12
6
6
*
A, C = Ir.; B, D = Con.; E = Ch.; F = Al.
18-62
18-12
6
6
*
A, B, C = Ir.; D, E, F = Con.
18-63
18-15
4
*
A, C = Con.; B, D = Cu.
18-65
18-12
6
6
*
A = Ir.; B = Con.; Bal. = Cu.
18-66
18-1
10
10
*
A, C, E, G, I = Cu.; B, D, F, H, J = Con.
18-67
18-12
6
6
*
A, C, E = Cu.; B, D, F = Con.
18-68
18-11
5
18-69
18-1
10
18-70
18-11
5
18-71
18-15
4
18-72
18-15
18-73
18-74
4
5
A, D = Al.; B, C = Ch.; E = Al.
*
A, D = Al.; B, C = Ch.; E = Cu.
*
A = Al.; B = Ch.; Bal. = Cu.
5
*
A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu.
4
*
A = Con.; Bal. = Cu.
4
4
*
D = Con.; Bal. = Cu.
18-9
7
2
5
*
A = Al.; D = Ch.; Bal. = Cu.
18-12
6
6
*
A = Ch.; B = Al., D = Ir.; E = Cu.; C, F = Con.
18-76
18-1
10
10
*
A, C, E, G, I = Al.; B, D, F, H, J = Ch.
18-77
18-1
10
10
*
A, C, E, G = Al.; B, D, F, H = Ch.; Bal. = Cu.
18-78
18-1
10
10
*
A = Al.; B = Ch.; D, F, H, J = Con.; Bal. = Cu.
18-79
18-12
6
6
*
A, F = Ir.; B, E = Con.; C, D = Cu.
18-80
18-15
4
18-81
18-1
10
18-82
18-1
10
20-52
20-4
4
20-56
20-7
8
20-60
20-7
8
8
45°
D = Ch.; E = Al.; Bal. = Cu.
20-61
20-29
17
17
45°
A, B, M = Cu.; Bal. = Con.
20-62
20-15
7
80°
A, C, E = Al.; B, D, F = Ch.; G = Cu.
20-64
20-27
14
14
*
20-65
20-27
14
14
*
A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
20-67
20-16
9
7
*
H = Al.; I = Ch.; Bal. = Cu.
20-68
20-7
8
8
*
A, B, G, H = Con.; C, D, E, F = Cu.
20-69
20-27
14
14
*
A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
20-70
20-29
17
17
*
A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
20-71
20-29
17
17
*
S = Al.; R = Ch.; Bal. = Cu.
20-74
20-29
17
17
*
A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu.
20-75
20-15
7
7
20-77
20-16
9
2
20-80
20-27
20-81
20-27
20-82
20-85
10
4
10
10
4
8
7
2
*
A, C = Cu.; B, D = Con.
*
E, G = Con.; Bal. = Cu.
*
E, G = Con.; F, H = Ir.; Bal. = Cu.
315°
A = Ir.; B = Con.; C = Ch.; D = Al.
45°
A, B, G, H = Ir.; C, D, E, F = Con.
A = Al.; C = Ch.; Bal. = Cu.
*
G = Al.; Bal = Ch.
7
*
A = Con.; Bal. = Std.
14
14
*
A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
14
14
*
A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al.
20-29
17
17
*
A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
20-33
11
11
*
K, L = Al.; Bal. = Ch.
20-87
20-29
17
17
*
A, C, E, G, J, L, N, R = Con.; Bal. = Cu.
20-88
20-27
14
14
*
A, C, E = Al.; B, D, F = Ch.; G, H, K, N = Con.; Bal. = Cu.
20-89
20-27
14
14
*
B, D, F, H, J, L = Al.; A, C, E, G, I, K = Ch.; M, N = Cu.
20-90
20-27
14
14
*
C, G, I = Ch.; K, L, M = Al.; Bal. = Cu.
20-91
20-27
14
14
*
I = Ch.; K = Al.; Bal. = Cu.
*No rotation required.
66
QWL
thermocouple arrangements (Cont’d.)
Shell
Size
and Arrg.
Similar
To
MS Arrg.
Total
Contacts
Contact
Size
12
16
Pin Insert
Rotation
C/W
Contact Material
20-92
20-7
8
8
*
A = Al.; H = Cu.; Bal. = Ch.
20-93
20-27
14
14
*
A = Ch.; B = Al.; Bal. = Cu.
20-94
20-15
7
*
A, C, E = Al.; B, D, F = Ch.; G = Cu.
20-99
20-33
11
11
*
A = Al.; Bal. = Ch.
7
22-57
22-14
19
19
45°
A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu.
22-60
22-14
19
19
45°
U = Al.; N = Ch.; Bal. = Cu.
22-62
22-23
8
60°
A, B, F, G = Al.; C, D, E, H = Ch.
22-68
22-19
14
14
45°
A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con.
22-69
22-19
14
14
45°
22-71
22-14
19
19
*
V = Al., U = Ch.; Bal. = Cu.
22-72
22-5
6
2
4
*
B = Al.; E = Ch.; Bal. = Cu.
22-73
22-5
6
2
4
*
E = Al.; B = Ch.; Bal. = Cu.
22-74
22-23
8
8
*
A, C, E, G = Ir.; B, D, F, H = Con.
22-75
22-23
8
8
*
A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con.
21
21
*
W = Con.; Bal. = Cu.
22-77
22-19
14
14
*
B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con.
22-78
22-14
19
19
*
A, C, E, G, H, K, M, P, R, T = Con.; Bal. = Cu.
22-76
8
A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
22-79
22-10
4
4
*
A, C = Con.; B, D = Cu.
22-82
22-14
19
19
*
A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S, U = Con.; V = Cu.
22-83
22-18
8
8
*
A, C, E, G = Al.; B, D, F, H = Ch.
22-84
22-14
19
19
*
A, C, S = Ch.; B, D, T = Al.; Bal. = Cu.
22-85
22-19
14
14
*
A, C, E, G, J, L, N = Al.; B, D, F, H, K, M, P = Ch.
22-89
22-28
7
7
24-56
24-20
11
2
24-57
24-28
24-62
24-28
24-63
*
A, C, E = Ir.; B, D, F = Con.; G = Cu.
9
45°
E = Al.; F = Ch.; Bal. = Cu.
24
24
45°
A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Bal. = Al.
24
24
*
24-28
24
24
*
A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con.
24-64
24-5
16
16
*
A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con.
24-68
24-28
24
24
*
D = Con.; Bal. = Cu.
24-81
24-7
16
14
*
A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con.
24-88
24-28
24
24
*
A, B, C, D, E, F, G, H, J, K, L, M = Con.; Bal. = Ir.
24-91
24-5
16
16
*
A, B, C, D, E, F, G, H = Al.; J, K, L, M, N, P, R, S = Ch.
2
A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Bal. = Cu.
28-53
28-11
22
4
18
45°
J, L = Al.; K, M = Ch.; Bal. = Cu.
28-58
28-20
14
10
4
45°
A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
28-61
28-21
37
28-63
28-20
14
37
45°
A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Bal. = Con.
4
45°
A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Bal. = Cu.
28-64
28-15
35
35
*
A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Bal. = Cu.
28-65
28-12
26
26
*
A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M,
P, S, U, W, = Con.; Y, a = Ch.; b, d = Cu.
28-67
28-16
20
20
*
28-68
28-15
35
35
45°
28-69
28-11
22
4
18
*
G = Al.; R = Ch.; Bal. = Cu.
28-70
28-11
22
4
18
*
A = Al.; B = Ch.; Bal. = Cu.
28-77
28-11
22
4
18
*
J = Con.; Bal. = Cu.
10
U = Con.; Bal. = Cu.
T = Al.; U = Ch.; Bal. = Cu.
67
QWL
thermocouple arrangements (Cont’d.)
Shell
Size
and Arrg.
Similar
To
MS Arrg.
Total
Contacts
Contact
Size
12
16
Pin Insert
Rotation
C/W
37
*
Contact Material
A, D, S, Z, n, s = Ir.; B, J, K, f, g, r, = Con.; G, L, P, b, e, j = Al.;
F, H, T, X, h, k = Ch.; Bal. = Cu.
28-81
28-21
37
28-85
28-11
22
4
18
45°
28-91
28-9
12
6
6
*
28-94
28-12
26
26
*
B, D, F, H, K, M, P, S, U, W, Y, a, d = Al.; Bal. = Ch.
28-98
28-21
37
37
*
M = Al.; F = Ch.; Bal. = Cu.
28-99
28-12
26
26
*
B, D, F, H, K, M, P, S, U, W, Y, a = Con.; Bal. = Cu.
28-AC
28-16
20
20
*
28-AD
28-21
37
37
45°
28-AE
28-21
37
37
*
28-AF
28-18
12
12
*
A, C, E, G, J, L = Ch.; Bal. = Al.
28-AG
28-12
26
26
*
A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; Bal. = Cu.
K, M = Al.; J, L = Ch.; Bal. = Cu.
M = Ir.; L = Con.; Bal. = Cu.
A, C, E, G, J, L = Ir.; B, D, F, N, K, M = Con.; Bal. = Cu.
A, C, F, H, J, K, M, N, T, X, Z, a, d, h, k, m, n, r = Cu.; Bal. = Con.
A, C, E, G, J, L, N, R, T, V, X, a, c, e, g, j, m, p, s = Cu.; Bal. = Con.
28-AK
28-21
37
37
*
32-51
32-8
30
6
24
90°
M = Ch.; N = Al.; Bal. = Cu.
32-55
32-8
30
6
24
125°
M, N, = Ch.; O, P = Al.; Bal. = Cu.
32-91
32-64
54
54
*
36-53
36-7
47
40
45°
36-56
36-10
48
48
*
A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Bal. = Cu.
36-57
36-8
47
46
*
W = Al.; f = Ch.; Bal. = Cu.
36-58
36-15
35
35
*
H = Al.; G = Ch.; Bal. = Cu.
36-61
36-15
35
35
*
A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Bal. = Cu.
7
1
A, B, C, D, J, K, L, M, N, P, X, a, b, c, d, e, m, p = Ch.; n = Cu.; Bal. = Al.
A, C, E, G, J, L, N, P, S, U, W, Y, a, c, e, g, j, m = Ir.; B, D, F, H, K, M, O,
R, T, V, X, Z, b, d, f, h, k, n = Con.; Bal. = Cu.
u, v, w = Al.; x, y, z = Ch.; Bal. = Cu.
36-62
36-10
48
48
*
A, C, E = Al.; B, D, F = Ch.; Bal. = Cu.
36-82
36-52††
52
52
*
v, g = Ir.; p, y, c = Con.; x = Ch.; Bal. = Cu.
36-86
36-10
48
48
*
A, C, E, G, J, L, N, P, R, T, V, X = Al.; B, D, F, H, K, M, O, Q,
S, U, W, Y = Ch.; z, b, d, f, h, k, n, q, s, u, w, y = Con.;
a, c, e, g, j, m, p, r, t, v, x, z = Cu.
36-88
36-52
52
52
*
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF = Cu.; Bal. = Con.
40-58
40-56††
85
85
*
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC,
BE, BH, BK, BM, BP, BS, BU = Ir.; Bal. = Con.
40-59
40-56††
85
85
*
B = Ch.; C = Con.; Bal. = Cu.
40-77
40-53††
60
60
*
55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Bal. = Cu.
40-78
40-53††
60
60
*
50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37, = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Bal. = Cu.
40-88
40-53
60
60
*
1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39,
41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = Con.; Bal. = Cu.
*
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF,
AJ, AL, AN, AR, AT = Cu.; B, D, F, J, L, N, R, T, V, X, Z, b, d, g, i, k, n,
q, s, u, w, y, AA, AC, AE, AH, AK, AM, AP, AS = Con.; AU, AW, AY, BA,
BC, BE, BH, BK, BM, BP, BS, BU = Ch.; AV, AX, AZ, BB, BD, BF, BJ, BL,
BN, BR, BT, BV = Al.
40-AA
40-56
85
85
44-57
44-52
104
104
*
A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con.
44-59
44-52
104
104
*
34 = Con.; 70 = Cu.
44-60
44-52
104
104
*
A, C, E, etc. = Ch., (52); B, D, F, etc. = Al. (52)
*
BY, BZ, CA, CB, CC, CD, CE, CR = Al.; CH, CJ, CK, CL, CM, CN, CP
CS = Ch.; Bal. = Cu.
44-62
44-52
104
104
††Amphenol® arrangement*No rotation required.
68
Other Heavy Duty Cylindrical Connectors
Offered by Amphenol
Class “L” MIL-C-22992, QWLD and Star-Line
Amphenol meets the demands for heavy duty connectors by
providing three additional cylindrical connector series, each
with unique design characteristics for reliable operation in specific industrial environments.
Class “L”, MIL-C-22992 – for the heaviest electrical loads; for
military and industrial applications.
• MIL-C-22992 qualification.
• Current range from 40 to 200 amperes.
• Direct current or single/three phase, 60/400 Hertz alternating current.
• Rugged shells are resistant to vibration, high impact, shock
and corrosion
• Double stub threads per MIL-STD-1373 for fast coupling
and easy cleaning.
• Five key polarization system assures that circuits with
incompatible power characteristics (voltage, phase and frequency) are not mated.
• Crimp termination. Contacts can be soldered.
• Automatic grounding for safety.
• Unique arc quenching capability provides a positive safety feature if connectors are
inadvertently disconnected under load.
• 4 shell styles with 7 insert patterns that facilitate large conductors.
• Grommets and seals provide waterproofing.
QWLD – for most power and control circuits
• Military (MIL-C-22992) qualified connectors and industrial
equivalents available.
• Increased shell size for greater durability than similar
standard connectors.
• Crimp or solder termination.
• Double stub threaded per MIL-STD-1373.
• 7 shell styles with over 300 insert patterns (MIL-C-5015 inserts
plus specials)
• Class C is pressurized; Class R is environmental.
Heavy Duty Class “L”
Connectors
QWLD Series
Star-line® Series – heavy duty environmentally sealed plugs and receptacles
that are used in all types of industrial and aerospace applications.
• Equals or exceeds MIL-C-5015 E and R specifications.
• UL listed and CSA listed circuit breaking capability.
• Up to high amperage of 1135 amps at 1000VAC or DC rating available.
• Solder, crimp and pressure terminals. Circuit breaking power and control
types.
• Double lead Acme threads provide complete coupling in one turn of the
coupling nut, and do not clog under adverse weather conditions.
• IP67 rating for environmental sealing.
• Hard anodic coating provides dielectric strength with heat and corrosion
resistance.
Star-Line Series
Star-line EX® Series – Hybrid form of the Star-Line series with higher temperature
ranges. Cenelec Certified for use in Zone 1-IIc
hazardous environments. EX Certificate #03ATEX 1101X.
For further information on these additional heavy duty cylindri69
cal connectors, refer to the following:
Catalog 12-052 for Class “L”, MIL-C-22992 Connectors
Catalog 12-052 for QWLD Connectors
Catalog 12-054 for Star-Line and Star-Line EX Connectors.