Safety Relays Power Supply Unit Specifications Standards IEC/EN 60204-1 Approvals CE marked for all applicable directives and cULus Power Supply 110V AC and 230V AC 50/50Hz Power Consumption <4W Fuses Input (external) 500mA time lag Outputs 500mA@ 24V DC Indication LEDs Red = Power on Impulse Withstand Voltage 3000V Installation Group C in accordance with VDE 0110 Pollution Degree 3 Operating Temperature -10°C to +55°C (+14°F to +131°F) Description Humidity 90% RH The Minotaur power supply converts either 110V AC or 230V AC to 24V DC. It is intended to be used with an MSR5T or a Ferrotek noncontact interlock. Enclosure Protection IP40, (NEMA 1), DIN 0470 Terminal Protection IP20, DIN 0470 Conductor Size 1 x 2.5mm2 (14AWG) stranded 1 x 4mm2 (12AWG) solid Torque Settings—terminal screws 1N⋅m (8.85lb⋅in) Case Material Red Polycarbonate The power supply can be connected to an MSR5T and used to interface to 110V AC or 230V AC emergency stop and gate interlock control signals. The power supply can be used to power 3 Ferrotek control units and one MSR5T for noncontact interlock protection. Mounting 35mm DIN rail Weight 210g (0.46lbs) Features Vibration 0.75mm (0.30in) peak, 10-55Hz • • • • Shock 30g, 11ms half sine 110V AC or 230V AC input 24V DC output <4VA power consumption 22.5mm wide housing 4-8 Safety Relays Power Supply Unit Product Selection Description Output Catalogue Number 110/230V AC Power Supply 500mA @ 24V DC 440R-A32003 Dimensions—mm (inches) 22.5 (0.89) 75 (2.95) 82 (3.23) 99 (3.9) 35mm DIN Rail Mounting Typical Wiring Diagrams 110V Connections 110V AC Supply Jumper A1 Jumper A3 A2 24V AC Output A4 24V AC Output _ + + _ 24V AC Output 24V AC Output _ + _ + 230V Connections 230V AC Supply A1 A3 24V AC Output Jumper A2 A4 + 24V AC Output 24V AC Output _ + _ + 24V AC Output _ + _ 4-9