MAXIM MAX9632_1108

19-5200; Rev 2; 8/11
TION KIT
EVALUA BLE
IL
AVA A
36V, Precision, Low-Noise,
Wide-Band Amplifier
The MAX9632 is a low-noise, precision, wide-band
operational amplifier that can operate in a very wide
+4.5V to +36V supply voltage range. The IC operates in
dual (±18V) mode.
The exceptionally fast settling time and low distortion
make the IC an excellent solution for precision acquisition systems. The rail-to-rail output swing maximizes the
dynamic range when driving high-resolution 24-bit Σ∆
ADCs even with low supply voltages.
The IC achieves 55MHz of gain-bandwidth product and
ultra-low 0.94nV/√Hz input voltage noise with only 3.9mA
of quiescent current.
The IC is offered in 8-pin SO and TDFN packages and
is rated for operation over the -40NC to +125NC temperature range.
Features
S 0.94nV/√Hz Ultra-Low Input Voltage Noise
S Very Fast 600ns Settling Time to 16-Bit Accuracy
S THD of -128dB at 10kHz
S Low Input Offset Voltage 125µV (max)
S Low Input Offset Temperature Drift 0.5µV/°C (max)
S Gain-Bandwidth Product 55MHz
S +4.5V to +36V Wide Supply Range
S Rail-to-Rail Output
S Unity-Gain Stable
S 8-Pin SO and TDFN Packages
S ESD 8kV HBM and 1kV CDM
Ordering Information
Applications
PINPACKAGE
High-Resolution ADC Drivers
PART
TEMP RANGE
High-Resolution DAC Buffers
MAX9632ASA+
-40NC to +125NC
8 SO
Medical Imaging
MAX9632ATA+
-40NC to +125NC
8 TDFN-EP*
Low-Noise Signal Processing
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
Test and Measurement Systems
TOP
MARK
—
BML
ATE
INPUT-VOLTAGE NOISE DENSITY
vs. FREQUENCY
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
MAX9632 toc23
1.6
-80
TOTAL HARMONIC DISTORTION (THD)
MAX9632 toc12
INPUT-VOLTAGE NOISE DENSITY (nV/√Hz)
1.8
TOTAL HARMONIC DISTORTION
vs. OUTPUT VOLTAGE
-90
-100
-110
f = 10kHz
-120
-130
-140
f = 1kHz
-150
-160
10
100
1k
FREQUENCY (Hz)
10k
100k
0.1
1
10
OUTPUT VOLTAGE (V)
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX9632
General Description
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
ABSOLUTE MAXIMUM RATINGS
VCC to VEE.............................................................-0.3V to +40V
All Other Pins...................................(VEE - 0.3V) to (VCC + 0.3V)
Short-Circuit (GND) Duration, OUT........................................ 10s
Continuous Input Current (any pin).................................. Q20mA
Continuous Power Dissipation (TA = +70NC) (Note 1)
Multilayer SO (derate 7.4mW/NC above +70NC)..........588mW
Multilayer TDFN (derate 23.8mW/NC above +70NC)....1905mW
ESD Protection
HBM............................................................................................... 8kV
CDM.................................................................................... 1kV
Operating Temperature Range......................... -40NC to +125NC
Junction Temperature......................................................+150NC
Lead Temperature (soldering, 10s).................................+300NC
Soldering Temperature (reflow).......................................+260NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
PACKAGE THERMAL CHARACTERISTICS (Note 1)
6 TDFN
Junction-to-Ambient Thermal Resistance (qJA)...........42°C/W
Junction-to-Case Thermal Resistance (qJC)..................8°C/W
8 SO
Junction-to-Ambient Thermal Resistance (qJA).........136°C/W
Junction-to-Case Thermal Resistance (qJC)................38°C/W
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
ELECTRICAL CHARACTERISTICS
(VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are
at TA = +25NC, unless otherwise noted.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
36
V
6.5
mA
POWER SUPPLY
Supply Voltage Range
VCC
Supply Current
ICC
Power-Supply Rejection Ratio
PSRR
Guaranteed by PSRR
4.5
TA = +25NC
125
-40NC P TA P +125NC
120
3.9
140
dB
SHUTDOWN
Shutdown Input Voltage
Shutdown Current
Device disabled
VCC
- 0.35
VCC
Device enabled
VEE
VCC
- 3.0
VSHDN
ISHDN
VSHDN = VCC
1
15
TA = +25NC
30
125
V
FA
DC SPECIFICATIONS
Input Offset Voltage
Input Offset Voltage Drift
VOS
165
-40NC P TA P +125NC
(Note 3)
FV
0.15
0.5
FV/NC
IB
30
180
nA
Input Offset Current
IOS
15
100
nA
Input Common-Mode Range
VCM
VCC 1.4
V
Input Bias Current
QDVOS
Guaranteed by CMRR
VEE +
1.8
2 _______________________________________________________________________________________
36V, Precision, Low-Noise,
Wide-Band Amplifier
(VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are
at TA = +25NC, unless otherwise noted.) (Note 2)
PARAMETER
SYMBOL
Common-Mode Rejection Ratio
CMRR
Large-Signal Gain
AVOL
CONDITIONS
MIN
TYP
VEE + 1.8V P VCM P VCC - 1.4V, TA = +25NC
120
135
VEE + 1.8V P VCM P VCC - 1.4V,
-40NC P TA P +125NC
110
VEE + 0.2V P VOUT P VCC - 0.2V, RL = 10kI
125
140
VEE + 0.6V P VOUT P VCC - 0.6V, RL = 600I
120
135
VOH
VCC - VOUT
VOL
VOUT - VEE
ISC
TA = +25NC
Output Voltage Swing
Short-Circuit Current
MAX
UNITS
dB
dB
RL = 10kI
50
150
RL = 600I
150
400
RL = 10kI
50
150
RL = 600I
150
400
mV
56
mA
AC SPECIFICATIONS
Gain-Bandwidth Product
Slew Rate
Settling Time
Total Harmonic Distortion
Input-Voltage Noise Density
GBWP
55
MHz
SR
0 P VOUT P 5V
30
V/Fs
tS
To 0.0015%, VOUT = 10VP-P, CL = 100pF,
AV = 1V/V
600
ns
f = 1kHz, VOUT = 3VRMS, RL = 600I, AV
= 1V/V
-136
f = 10kHz, VOUT = 3VRMS, RL = 600I, AV
= 1V/V
-128
f = 1kHz
0.94
THD
eN
Input Voltage Noise
0.1Hz P f P 10Hz
dB
65
Input-Current Noise Density
iN
f = 1kHz
3.75
Capacitive Loading
CL
No sustained oscillation, AV = 1V/V
350
nV/√Hz
nVP-P
pA/√Hz
pF
Note 2: All devices are 100% production tested at TA = +25NC. Temperature limits are guaranteed by design.
Note 3: Guaranteed by design.
_______________________________________________________________________________________ 3
MAX9632
ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics
(VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at
TA = +25NC, unless otherwise noted.)
20
15
15
10
10
MAX9632 toc03
4.6
4.4
4.2
4.0
3.8
3.6
3.4
5
5
3.2
0
10
20
30
40
50
60
0
10
15
20
25
30
35
SUPPLY VOLTAGE (V)
SUPPLY CURRENT
vs. TEMPERATURE
INPUT OFFSET VOLTAGE
vs. COMMON-MODE VOLTAGE
INPUT BIAS CURRENT
vs. INPUT COMMON-MODE VOLTAGE
4.2
4.0
3.8
3.6
3.4
-46
-54
-58
75
100
TA = +85°C
-52
3.0
50
TA = 0°C
-50
-56
25
TA = +25°C
-48
125
TA = +125°C
-10
-20
TA = +85°C
-30
-50
TA = 0°C
TA = -40°C
-70
-15
-10
-5
0
5
10
TA = +25°C
-40
-60
TA = +125°C
15
-15
-10
-5
0
5
10
TEMPERATURE (°C)
COMMON-MODE VOLTAGE (V)
COMMON-MODE VOLTAGE (V)
COMMON-MODE REJECTION RATIO
vs. FREQUENCY
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY
OUTPUT VOLTAGE HIGH
vs. OUTPUT CURRENT (SOURCE)
-40
-60
-80
-100
-120
-140
-160
-20
-40
-60
-80
-100
-120
100
1k
10k 100k 1M 10M 100M
FREQUENCY (Hz)
15.0
14.9
TA = +25°C
14.8
TA = 0°C
TA = +125°C
14.7
TA = +85°C
14.6
14.5
-140
TA = -40°C
14.4
-160
10
15.1
15
MAX9632 toc09
0
OUTPUT VOLTAGE HIGH (V)
-20
20
MAX9632 toc08
0
POWER-SUPPLY REJECTION RATIO (dB)
MAX9632 toc07
20
40
MAX9632 toc06
-44
3.2
0
TA = -40°C
-42
0
INPUT BIAS CURRENT (nA)
4.4
-40
MAX9632 toc05
MAX9632 toc04
4.6
1
5
INPUT OFFSET VOLTAGE TEMPERATURE
COEFFICIENT (nV/°C)
4.8
-25
0
20 40 60 80 100 120 140 160 180 200
INPUT OFFSET VOLTAGE (µV)
5.0
-50
3.0
0
INPUT OFFSET VOLTAGE (µV)
0
SUPPLY CURRENT (mA)
4.8
SUPPLY CURRENT (mA)
20
OCCURANCE (%)
25
5.0
MAX9632 toc02
30
OCCURANCE (%)
25
MAX9632 toc01
35
SUPPLY CURRENT
vs. SUPPLY VOLTAGE
INPUT OFFSET VOLTAGE TEMPERATURE
COEFFICIENT HISTOGRAM
INPUT OFFSET VOLTAGE HISTOGRAM
COMMON-MODE REJECTION RATIO (dB)
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
1
10
100
1k
10k 100k 1M 10M 100M
FREQUENCY (Hz)
0
10
20
30
40
50
OUTPUT SOURCE CURRENT (mA)
4 _______________________________________________________________________________________
60
36V, Precision, Low-Noise,
Wide-Band Amplifier
OUTPUT VOLTAGE LOW
vs. OUTPUT CURRENT (SINK)
TA = 0°C
-14.85
TA = -40°C
-14.90
100
80
60
40
20
-14.95
0
-15.00
-20
10
20
30
40
50
10
100
1k
FREQUENCY (Hz)
0.1Hz TO 10Hz NOISE vs. TIME
INPUT-CURRENT NOISE DENSITY
vs. FREQUENCY
1.2
1.0
0.8
0.6
0.4
0.2
10
100
1k
100k
10k
FREQUENCY (Hz)
OUTPUT IMPEDANCE vs. FREQUENCY
25
70
20
60
OUTPUT IMPEDANCE (I)
INPUT CURRENT NOISE DENSITY (pA/√Hz)
20nV/div
1.4
10k 100k 1M 10M 100M
OUTPUT SINK CURRENT (mA)
MAX9632 toc13
1.6
0
1
60
MAX9632 toc14
0
MAX9632 toc12
120
15
10
MAX9632 toc15
TA = +125°C
-14.80
140
1.8
INPUT-VOLTAGE NOISE DENSITY (nV/√Hz)
TA = +85°C
-14.75
MAX9632 toc11
TA = +25°C
OPEN-LOOP GAIN (dB)
50
40
30
20
5
10
0
10
10s/div
100
1k
10k
0
100k
10
100
1k
10k
100k
1M
10M 100M
FREQUENCY (Hz)
FREQUENCY (Hz)
INPUT SMALL-SIGNAL STEP RESPONSE
INPUT LARGE-SIGNAL STEP RESPONSE
STABILITY vs. CAPACITIVE AND
RESISTIVE LOAD PARALLEL
MAX9632 toc16
MAX9632 toc17
1000
900
INPUT
2V/div
800
RESISTIVE LOAD (I)
INPUT
100mV/div
OUTPUT
500mV/div
OUTPUT
50mV/div
MAX9632 toc18
OUTPUT VOLTAGE LOW (V)
-14.60
-14.70
160
MAX9632 toc10
-14.55
-14.65
INPUT-VOLTAGE NOISE DENSITY
vs. FREQUENCY
OPEN-LOOP GAIN vs. FREQUENCY
700
600
500
400
300
UNSTABLE
200
STABLE
100
0
200ns/div
1µs/div
0
200
400
600
800
1000
1200
CAPACITIVE LOAD (pF)
_______________________________________________________________________________________ 5
MAX9632
Typical Operating Characteristics (continued)
(VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at
TA = +25NC, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at
TA = +25NC, unless otherwise noted.)
ISOLATION RESISTANCE
vs. CAPACITIVE STABILITY
POWER-UP TIME
VCC = 5V, VEE = -5V
MAX9632 toc19
10
9
ISOLATION RESISTANCE (I)
8
MAX9632 toc20
VCC
10V/div
GND
7
6
5
4
3
OUTPUT
500mV/div
STABLE
UNSTABLE
2
GND
1
0
0 100 200 300 400 500 600 700 800 900 1000
1µs/div
CAPACITIVE LOAD (pF)
RECOVERY FROM SHUTDOWN
VCC = 5V, VEE = -5V
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
MAX9632 toc21
TOTAL HARMONIC DISTORTION (dB)
GND
OUTPUT
500mV/div
GND
MAX9632 toc22
-100
SHDN
5V/div
-110
-120
-130
-140
-150
-160
1µs/div
10
100
1k
10k
FREQUENCY (Hz)
TOTAL HARMONIC DISTORTION
vs. OUTPUT VOLTAGE
MAX9632 toc23
-80
TOTAL HARMONIC DISTORTION (THD)
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
-90
-100
-110
f = 10kHz
-120
-130
-140
f = 1kHz
-150
-160
0.1
1
10
OUTPUT VOLTAGE (V)
6 _______________________________________________________________________________________
100k
36V, Precision, Low-Noise,
Wide-Band Amplifier
TOP VIEW
NOT TO SCALE
+
N.C.
1
VCC
IN-
2
6
OUT
IN+
3
5
N.C.
VEE
4
N.C.
1
8
SHDN
IN-
2
7
IN+
3
VEE
4
MAX9632
+
SO
MAX9632
EP
8
SHDN
7
VCC
6
OUT
5
N.C.
TDFN
Pin Description
PIN
NAME
1, 5
N.C.
Not Connected
FUNCTION
2
IN-
Negative Input
3
IN+
Positive Input
4
VEE
Negative Supply Voltage
6
OUT
Output
7
VCC
Positive Supply Voltage
8
SHDN
Active-High Shutdown
—
EP
Exposed Pad (TDFN Only). Connect to a large VEE plane to maximize thermal performance. Not
intended as an electrical connection point.
_______________________________________________________________________________________ 7
MAX9632
Pin Configuration
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
Detailed Description
The MAX9632 is designed in a new 36V, high-speed
complementary BiCMOS process that is optimized for
excellent AC dynamic performance combined with highvoltage operation.
The IC offers precision, high-bandwidth, ultra-low noise
and exceptional distortion performance.
The IC is unity-gain stable and operates either with
single-supply voltage up to 36V or with dual supplies up
to Q18V.
Applications Information
Operating Supply Voltage
The IC can operate with dual supplies from Q2.25V to
Q18V or with a single supply from +4.5V to +36V with
respect to ground. Even though the IC supports highvoltage operation with excellent performance, the device
can also operate in very popular applications at 5V.
Low Noise and Low Distortion
The IC is designed for extremely low-noise applications
such as professional audio equipment, very high performance instrumentations, automated test equipment, and
medical imaging. The low noise, combined with fast settling time, makes it ideal to drive high-resolution sigmadelta or SARs analog-to-digital converters.
The IC is also designed for ultra-low-distortion performance. THD specifications in the Electrical Characteristics
table and Typical Operating Characteristics are calculated up to the fifth harmonic. Even when driving highvoltage swing up to 10VP-P, the IC maintains excellent low
distortion operation over and above 100kHz of bandwidth.
Rail-to-Rail Output Stage
The output stage swings to within 50mV (typ) of either
power-supply rail with a 10kI load and provides a
55MHz GBW with a 30V/s slew rate. The device is
unity-gain stable and can drive a 100pF capacitive
load without compromising stability. Stability with higher
capacitive loads can be improved by adding an isolation resistor in series with the op-amp output. This resistor improves the circuit’s phase margin by isolating the
load capacitor from the amplifier’s output. The Typical
Operating Characteristics show a profile of the isolation
resistor and capacitive load values that maintain the
device into the stable region.
Figure 1. Input Protection Circuit
Input Differential Voltage Protection
During normal op-amp operation, the inverting and noninverting inputs of the IC are at essentially the same voltage.
However, either due to fast input voltage transients or
other fault conditions, these inputs can be forced to be
at two different voltages.
Internal back-to-back diodes protect the inputs from an
excessive differential voltage (Figure 1). Therefore, IN+
and IN- can be any voltage within the range shown in the
Absolute Maximum Ratings section. Note the protection
time is still dependent on the package thermal limits.
If the input signal is fast enough to create the internal
diodes’ forward bias condition, the input signal current
must be limited to 20mA or less. If the input signal current is not inherently limited, an input series resistor can
be used to limit the signal input current. Care should be
taken in choosing the input series resistor value, since it
degrades the low-noise performance of the device.
Shutdown
The shutdown is referenced to the positive supply. See
the Electrical Characteristics table for the proper levels
of functionality. A high level (above VCC - 0.35V) disables
the op amp and puts the output into a high-impedance
state. A low level (below VCC - 3V) enables the device. As
an example, if the op amp is powered with dual supplies
of Q15V, the device is enabled when shutdown is at or
below 12V. The device is disabled when shutdown is at
or above 14.65V. If the op amp is powered with a single
supply of 36V, the device is enabled when shutdown is at
or below 33V. The device is disabled when shutdown is at
or above 35.65V. This input must be connected to a valid
high or low voltage and should not be left disconnected.
Power Supplies and Layout
The MAX9632 can operate with dual supplies from
Q2.25V to Q18V or with a single supply from +4.5V to
+36V with respect to ground. When used with dual
supplies, bypass both VCC and VEE with their own
0.1FF capacitor to ground. When used with a single
supply, bypass VCC with a 0.1FF capacitor to ground.
8 _______________________________________________________________________________________
36V, Precision, Low-Noise,
Wide-Band Amplifier
For high-frequency designs, ground vias are critical to
provide a ground return path for high-frequency signals
and should be placed near the decoupling capacitors.
Signal routing should be short and direct to avoid parasitic effects. Avoid using right angle connectors since
they may introduce a capacitive discontinuity and ultimately limit the frequency response.
Electrostatic Discharge (ESD)
The IC has built-in circuits to protect it from ESD events.
An ESD event produces a short, high-voltage pulse
that is transformed into a short current pulse once it
discharges through the device. The built-in protection
circuit provides a current path around the op amp that
prevents it from being damaged. The energy absorbed
by the protection circuit is dissipated as heat.
ESD protection is guaranteed up to Q8kV with the Human
Body Model (HBM). The Human Body Model simulates
the ESD phenomenon wherein a charged body directly
transfers its accumulated electrostatic charge to the
ESD-sensitive device. A common example of this phenomenon is when a person accumulates static charge
by walking across a carpet and then transfers all of the
charge to an ESD-sensitive device by touching it.
Not all ESD events involve the transfer of charge into the
device. ESD from a charged device to another body is
also a common form of ESD.
If a charged device comes into contact with another
conductive body that is at a lower potential, it discharges
into that body. Such an ESD event is known as Charged
Device Model (CDM) ESD, which can be even more
destructive than HBM ESD (despite its shorter pulse
duration) because of its high current. The IC guarantees
CDM ESD protection up to Q1kV.
Driving High-Resolution Sigma-Delta ADCs
The MAX9632’s excellent AC specifications and 55MHz
bandwidth are a good fit for driving high-speed, precision
delta-sigma ADCs. These ADCs require an ultra-low noise
op amp to achieve signal-to-noise ratios (SNR) better than
100dB. The MAX11040 is a 24-bit, 4-channel, simultaneous-sampling ADC with 117dB SNR at 1ksps and 106dB
at 16ksps. The MAX11040 measures analog inputs up to
Q2.2V. Sampling up to 64ksps, the MAX11040 achieves
better than -94dB THD and 94dB SFDR.
The MAX11040 measures four differential inputs simultaneously, outputting the data through an SPI™ interface
to allow daisy-chaining the data outputs and inputs
together. Therefore, up to eight MAX11040 devices can
be placed in parallel to measure up to 32 inputs simultaneously. This is ideal for 3-phase power monitoring that
requires multiple current and voltage readings and very
wide dynamic range.
The Typical Application Circuit shows an example of the
MAX9632 driving the MAX11040.
Chip Information
PROCESS: BiCMOS
SPI is a trademark of Mototrola, Inc.
_______________________________________________________________________________________ 9
MAX9632
Careful layout technique helps optimize performance
by decreasing the amount of stray capacitance at the
op amp’s inputs and outputs. To decrease stray capacitance, minimize trace lengths by placing external components close to the op amp’s pins.
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
Typical Application Circuit
22µF
+15V
1kI
IN+
180I
4.7kI
10kI
MAX9632
-15V
1nF
1µF
4.7kI
MAX11040
ADC
-15V
10kI
180I
MAX9632
IN22µF
1kI
+15V
10 �������������������������������������������������������������������������������������
36V, Precision, Low-Noise,
Wide-Band Amplifier
PACKAGE TYPE
PACKAGE CODE
OUTLINE NO.
LAND PATTERN NO.
8 SO
S8+2
21-0041
90-0096
8 TDFN-EP
T833+3
21-0137
90-0060
______________________________________________________________________________________ 11
MAX9632
Package Information
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”,
or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”,
or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
COMMON DIMENSIONS
PACKAGE VARIATIONS
MIN.
MAX.
PKG. CODE
N
D2
E2
e
JEDEC SPEC
b
A
0.70
0.80
T633-2
6
1.50±0.10
2.30±0.10
0.95 BSC
MO229 / WEEA
0.40±0.05
1.90 REF
D
2.90
3.10
T833-2
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
E
2.90
3.10
T833-3
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
A1
0.00
0.05
T1033-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
L
0.20
0.40
T1033MK-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
2.40 REF
SYMBOL
k
0.25 MIN.
T1033-2
A2
0.20 REF.
T1433-1
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
T1433-2
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
12 �������������������������������������������������������������������������������������
T1433-3F
14 1.70±0.10 2.30±0.10 0.40 BSC
---0.20±0.05
[(N/2)-1] x e
2.40 REF
2.40 REF
36V, Precision, Low-Noise,
Wide-Band Amplifier
COMMON DIMENSIONS
SYMBOL
A
MIN.
0.70
PACKAGE VARIATIONS
MAX.
PKG. CODE
N
D2
E2
e
JEDEC SPEC
b
0.80
T633-2
6
1.50±0.10
2.30±0.10
0.95 BSC
MO229 / WEEA
0.40±0.05
1.90 REF
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
2.00 REF
D
2.90
3.10
T833-2
E
2.90
3.10
T833-3
[(N/2)-1] x e
A1
0.00
0.05
T1033-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
L
0.20
0.40
T1033MK-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
k
0.25 MIN.
T1033-2
A2
0.20 REF.
T1433-1
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
T1433-2
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
T1433-3F
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
______________________________________________________________________________________ 13
MAX9632
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”,
or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
MAX9632
36V, Precision, Low-Noise,
Wide-Band Amplifier
Revision History
REVISION
NUMBER
REVISION
DATE
0
10/10
Initial release
—
1
4/11
Updated short-circuit current spec
3
2
8/11
Updated TDFN land pattern number
11
DESCRIPTION
PAGES
CHANGED
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
14
© 2011
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.