LH1529FPTR, LH1529GP, LH1529GPTR www.vishay.com Vishay Semiconductors Telecom Switch - 1 Form A Solid-State Relay FEATURES 8 1 • Solid-state relay and optocoupler in one package • Surface mount package - new flat pak • Isolation test voltage, 3000 VRMS • LH1529FP, CTR min. = 33 % • LH1529GP, CTR min. = 100 % • Optocoupler - Bidirectional current detection • Solid-state relay (equivalent to TS117P) - Typical RON 20 - Load voltage 350 V - Load current 120 mA - Current limit protection - High surge capability - Clean bounce free switching - Low power consumption - High reliability monolithic detector • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC S' 2 i179050-1 S 7 3 6 4 5 DESCRIPTION The LH1529FP and LH1529GP telecom switches consist of an optically coupled solid state relay (SSR) and a bidirectional input optocoupler. The SSR is ideal for performing switch hook and dial-pulse switching while the optocoupler performs ring detection and loop current sensing functions. Both the SSR and optocoupler provide 3000 VRMS of input to output isolation. The SSR is integrated on a monolithic receptor die using high voltage technology. The SSR features low on resistance, high breakdown voltage and current-limit circuitry that protects the relay from telephone line induced lightning surges. APPLICATIONS • PCMCIA/Notebook • General telecom switching - On/off hook control - Dial pulse - Ring current detection - Loop current sensing The optocoupler provides bidirectional current sensing via two anti parallel GaAs infrared emitting diodes. The opto channel provides a minimum CTR of 33 % at 6 mA. The LH1529FP and LH1529GP come in an 8 pin, 0.080" thick plastic flat pak, SMD. Note • See “solid-state relays” (application note 56) AGENCY APPROVALS UL1577: file no. E52744 system code O, double protection DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending), available with option 1 FIMKO: approval ORDERING INFORMATION L H 1 5 2 PART NUMBER 9 # # PACKAGE CONFIG. T R TAPE AND REEL PACKAGE 7 mm UL, FIMKO SMD-8, tape and reel LH1529FPTR SMD-8, tubes LH1529GP SMD-8, tape and reel Rev. 1.7, 03-Aug-11 SMD-# LH1529GPTR 1 Document Number: 83828 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1529FPTR, LH1529GP, LH1529GPTR www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SSR INPUT LED continuous forward current LED reverse voltage OUTPUT DC or peak AC load voltage Continuous DC load current SSR Ambient temperature range Storage temperature range Soldering temperature (1) Isolation test voltage (for 1 s) Isolation resistance TEST CONDITION SYMBOL VALUE UNIT IR 10 μA IF VR 50 6 mA V VL IL 350 120 V mA Tamb Tstg Tsld VISO RIO RIO Pdiss - 40 to + 85 - 40 to + 125 260 3000 1012 1011 600 °C °C °C VRMS mW IF VR 50 6 mA V BVCEO Pdiss 30 150 V mW IL 50 μA t = 10 s max. VIO = 500 V, Tamb = 25 °C VIO = 500 V, Tamb = 100 °C Power dissipation Optocoupler INPUT LED continuous forward current LED reverse voltage OUTPUT Collector emitter breakdown voltage Phototransistor power dissipation IR 10 μA Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER SSR INPUT LED forward current, switch turn-on LED forward current, switch turn-off LED forward voltage OUTPUT On-resistance Off-resistance Current limit Output off-state leakage current Output capacitance pin 7 to pin 8 OPTOCOUPLER LED forward current Saturation voltage Dark current leakage Trickle current leakage DC current transfer ratio TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 1.1 3 mA IL = 100 mA, t = 10 ms IFon VL = ± 300 V IFoff 0.2 1 IF = 10 mA VF 1 1.2 1.5 V IF = 5 mA, IL = ± 50 mA IF = 0 mA, VL = ± 100 V IF = 5 mA, t = 5 ms IF = 0 mA, VL = ± 100 V IF = 0 mA, VL = ± 350 V IF = 0 mA, VL = 1 V IF = 0 mA, VL = 50 V RON ROFF ILimit IO IO CO CO 20 5000 210 0.6 25 G mA nA μA pF pF IF = 10 mA IF = 16 mA, IC = 2 mA IF = 0 mA, VCE = 5 V IF = 5 μA, VCE = 5 V VF VCEsat ICEO1 ICEO2 CTRDC 0.9 1.2 0.07 33 150 V V nA μA % CTRDC 100 150 % IF = 6.0 mA, VCE = 0.5 V LH1529FP LH1529GP, LH1529GPTR 170 mA 250 200 1 55 10 1.5 0.5 500 1 Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Rev. 1.7, 03-Aug-11 2 Document Number: 83828 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1529FPTR, LH1529GP, LH1529GPTR www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION TYP. MAX. UNIT Turn-on time IF = 5 mA, IL = 50 mA PART SYMBOL ton MIN. 1.3 2.5 ms Turn-off time IF = 5 mA, IL = 50 mA toff 0.1 2.5 ms TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 40 IF = 50 mA IF = 20 mA 1.4 1.3 1.2 IF = 1.0 mA 1.1 IF = 2.0 mA 1.0 - 40 IF = 5.0 mA - 20 0 20 40 60 10 0 - 10 - 20 - 40 - 40 80 - 20 0 20 40 Change in Current Limit (%) Normalized to 25 °C IL = 100 mA 60 40 20 0 - 20 - 40 ilh1529fp_02 - 20 0 20 40 60 80 20 10 0 - 10 - 20 - 30 ilh1529fp_04 Ambient Temperature (°C) IF = 5.0 mA t = 5.0 ms VL = see elec. char. 30 - 40 - 40 80 Fig. 2 - LED Current for Switch Turn-on vs. Temperature Rev. 1.7, 03-Aug-11 60 Fig. 3 - On-Resistance vs. Temperature 100 - 60 - 40 40 Ambient Temperature (°C) ilh1529fp_03 Fig. 1 - LED Voltage vs. Temperature LED Forward Current for Switch Turn-on (%), Normalized to 25 °C 20 - 30 IF = 10 mA Ambient Temperature (°C) ilh1529fp_01 80 IF = 5.0 mA IL = 50 mA 30 1.5 Change in Ron (%) LED Forward Voltage (V) 1.6 - 20 0 20 40 60 80 Ambient Temperature (°C) Fig. 4 - Current Limit vs. Temperature 3 Document Number: 83828 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1529FPTR, LH1529GP, LH1529GPTR Vishay Semiconductors 8 10 000 6 4 1000 Leakage (pA) Change in Breakdown Voltage (%) Normalized to 25 °C www.vishay.com 2 0 -2 100 -4 10 -6 -8 - 40 1 - 20 0 20 40 60 80 0 Ambient Temperature (°C) ilh1529fp_05 80 80 70 60 Change in Toff (%) Normalized to 25 °C Capacitance (pF) 100 150 200 250 300 350 400 Load Voltage (V) Fig. 8 - Leakage Current vs. Applied Voltage Fig. 5 - Switch Breakdown Voltage vs. Temperature 60 50 40 30 20 IF = 10 mA IF = 8.0 mA 40 IF = 6.0 mA 20 0 - 20 IF = 5.0 mA IF = 4.0 mA IF = 3.0 mA IF = 2.0 mA - 40 - 60 10 0 0 20 40 60 80 - 80 - 40 100 Applied Voltage (V) ilh1529fp_06 - 20 0 20 40 60 80 Ambient Temperature (°C) ilh1529fp_09 Fig. 9 - Turn-off Time vs. Temperature Fig. 6 - Switch Capacitance vs. Applied Voltage 100 7 T = 85 °C 6 5 T = 70 °C 10 Ton (ms) Leakage (pA) 50 ilh1529fp_08 T = 50 °C T = 25 °C 1 4 3 T = 85 °C T = 25 °C T = - 45 °C 2 1 0.1 0 0 ilh1529fp_07 50 0 100 150 200 250 300 350 400 Load Voltage (V) ilh1529fp_10 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Fig. 10 - Turn-on Time vs. LED Current Fig. 7 - Leakage Current vs. Applied Voltage Rev. 1.7, 03-Aug-11 5 4 Document Number: 83828 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1529FPTR, LH1529GP, LH1529GPTR www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.74 Detail A (not to scale) pin one ID 3 2.1 1 . 04 4.57 ISO method A 0.51 0.25 9.5 typ. 6.96 5.48 See detail A 0.39 40° 0.000 to 0.102 0.25 typ. 2.03 0.41 Lead coplarity 0.1 max. 2.54 0.5 3° to 7° i178024 PACKAGE MARKING (example) LH1529 V YWW O 68 Note • Tape and reel suffix (TR) is not part of the package marking. Rev. 1.7, 03-Aug-11 5 Document Number: 83828 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1