General Purpose Relays Relay Package SNR I Relay package consisting of DIN-rail socket and relay I 1 CO with 6 A rated load I Module width only 6.2 mm I Reduced system width for increased packing density on the DIN rail I RoHS compliant (Directive 2002/95/EC) F0260SA Approvals V REG.-Nr. 6666, Z E214024 Socket: V REG.-Nr. 6666, Z 224918 Technical data of approved types on request Relay: Contact data Contact configuration 1 CO Contact set single contact Type of interruption micro disconnection Rated current 6A Rated voltage / max.switching voltage AC 240/400 VAC Maximum breaking capacity AC 1500 VA Limiting making capacity, max 4 s, duty factor 10% 10 A Contact material AgSnO2 AgSnO2 gold plated Minimum contact load 100mA, 12V 50mW Mechanical endurance 10x106 cycles Rated frequency of operation with / without load 6 /1200 min-1 Contact ratings For contact ratings see datasheet Slim Interface Relay SNR Input data Rated input voltage DC 12, 24 VDC, 115, 230 VAC/VDC *) Input power DC coil typ. 170 mW Operative range 2 *) Version 115, 230 VAC/VDC equipped with 60 VDC relay Coil versions, DC-coil Coil Rated Operate code voltage voltage VDC VDC LB2 12 8.4 LC4 24 16.8 Coil versions, AC-coil 50Hz Coil Rated Operate code voltage voltage 50 Hz VAC VAC SM5 115 82.0 TP0 230 160.0 Other coil voltages on request Release voltage VDC 0.6 1.2 Coil resistance Ohm 848+10% 3390+10% Rated coil power mW 170 170 Release voltage 50 Hz VAC 9.0 15.0 Coil resistance Rated coil power 50 Hz mVA 180 180 Ohm not applicable not applicable 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Relay Package SNR (Continued) Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category 4000 Vrms 1000 Vrms W 6 / 8 mm IIIa reinforced functional 250 V 2 230 / 400 V III Other data RoHS - Directive 2002/95/EC Ambient temperature range Operate- / release time Bounce time NO / NC contact Degree of protection DIN 40050 Terminals Terminal screw torque acc. IEC 61984 max. Wire cross section single wire fine wire with bootlace crimp (DIN 46228/1) Insertion cycles Max. Insertion Force total Mounting distance Weight Packaging unit compliant as per product date code 0404 -40...+55°C 5 / 2,5 ms 1,5 / 5 ms IP20 screw / cage clamp 0.5 Nm 0.6 Nm S0487-BA 0.14...2.5 mm2 0.14...2.5 mm2 0.14...2.5 mm2 A (10) 100 N 0 mm, dense packing 32 g 10 pcs Accessories For accessories see datasheet Accessories Slim Interface Relay SNR S0487-AA Version with screw terminals Product key S T Version with cage clamp terminals P Type Version 3P Relay set, SNR 1-pole CO, 6 A, screw terminals 4P Relay set, SNR 1-pole CO, 6 A, cage clamp terminals Contact material 3 AgSnO2 2 AgSnO2, gold plated Coil LB2 12 VDC LC4 24 VDC SM5 115 VDC/VAC TP0 230 VDC/VAC Other types on request Product key Socket Terminals Relay Contacts ST3P2LC4 ST3FLC4 screw V23092-A1024-A201 AgSnO2 gold pl. ST3P3LB2 V23092-A1012-A301 AgSnO2 V23092-A1024-A301 ST3P3LC4 ST3P3SM5 ST3FSM5 V23092-A1060-A301 ST3P3TP0 ST3FTP0 V23092-A1024-A201 AgSnO2 gold pl. ST4P2LC4 ST4FLC4 cage clamp ST4P3LB2 V23092-A1012-A301 AgSnO2 ST4P3LC4 V23092-A1024-A301 ST4P3SM5 ST4FSM5 V23092-A1060-A301 ST4P3TP0 ST4FTP0 For replacement use identical components according to table only! Coil 24 VDC 12 VDC 24 VDC 115 VDC/VAC 230 VDC/VAC 24 VDC 12 VDC 24 VDC 115 VDC/VAC 230 VAC/VAC Part number 3-1416100-0 3-1416100-1 3-1416100-2 3-1416100-3 3-1416100-4 3-1416100-5 3-1416100-6 3-1416100-7 3-1416100-8 3-1416100-9 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.