General Purpose Relays Power Relay 410 63 125°C I 1 pole 16 A, 1 NO or 1 NC contact I Switching capacity 4000 VA I Coil power 360 mW I 4 kV / 8 mm coil-contact, insulation to VDE 0631 and 0700 I Ambient temperature up to 125°C I Quick connect terminals for load side I WG version: Materials in accordance to IEC 60335-1 I RoHS compliant (Directive 2002/95/EC) as per product date code 0349 Applications F0248-AA White goods appliances, oven control, electric heating, power suppplies, air conditionning, motors, magnetic valves Approvals V REG.-Nr. 3725, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Limiting making capacity, max 4 s, duty factor 10% Contact material Mechanical endurance Rated frequency of operation with / without load Contact ratings Type Load NO contact 16 A, NO contact 12 A, NC contact 16 A, NO contact 10 A, NO contact 12 A, 250 250 250 400 250 VAC, VAC, VAC, VAC, VAC, 1NO or 1NC single contact micro disconnection 16 A 240/400 VAC 25 A AgCdO, AgNi 1x106 cycles 10 / 600 min-1 Cycles 1x105 4,5x105 1,5x105 5x104 5x104 resistive, 125°C resistive, 70°C resistive, 125°C resistive, 125°C cosϕ=0.6, 125°C Coil data Rated coil voltage DC coil Coil power DC coil Operative range Coil insulation system according UL1446 6...60 VDC typ. 360 mW 1 Class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 054 6 3.6 0.45 100+10% 360 053 9 5.5 0.68 230+10% 352 050 12 7.3 0.9 400+10% 360 046 24 14.6 1.8 1600+10% 360 043 48 29.2 3.6 6400+10% 360 042 60 36.5 4.5 10000+10% 360 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power Relay 410 63 125°C (Continued) Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category PCB layout / terminal assignment Bottom view on solder pins 4000 Vrms 1000 Vrms W 8 / 8 mm W IIIa PTI 250 reinforced functional 250 V 3 230/400 V III S0256-CA 1 NO contact Other data RoHS - Directive 2002/95/EC Flammability class according to UL94 For WG version: GWFI to IEC 60335-1 GWT to IEC 60335-1 Ambient temperature range Operate- / release time Bounce time NO / NC contact Category of protection Mounting Resistance to soldering heat Relay weight Packaging unit compliant as per product date code 0349 V-0 > 850 °C > 750 °C -20...+125°C typ 10 / 5 ms typ 3 ms RTII - flux proof pcb 270°C / 10 s 24 g 20 / 75 / 1050 pcs S0256-CB 1 NC contact S0256-CC Dimensions S0282-AB Product key 0 4 1 0 6 3 Type Coil Coil code: please refer to coil versions table, preferred types in bold print Version 001 1 NO contact, AgCdO 002 1 NC contact, AgCdO 005 1 NO contact, AgNi 006 1 NC contact, AgNi Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Other types on request Product key 0410 63 050 001 0410 63 046 001 0410 63 050 002 Version standard PCB terminals quick connect term. Cont. material AgCdO Cont.configuration 1 NO contact 1 NC contact Coil 12 VDC 24 VDC 12 VDC Part number 3-1415410-4 3-1415410-0 3-1415410-5 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.