SWS300A-600 Series Single Output General Purpose Power Supplies Features u Lower Cost u Active Power Factor Correction u Universal Input (85 - 265VAC) u Input Transient Protected IEC61000-4 u Enclosed u Global safety Approvals u Level B EMI Key Market Segments & Applications Specifications Model Input Voltage range (1) Inrush Current (115 / 230VAC) Power Factor Input Current (100/200VAC) Temperature Coefficient Overcurrent Protection Overvoltage Protection Overtemperature Protection Hold Up Time (Typ) Leakage Current (max) Remote Sense Parallel Connection Remote On/Off AC Fail Signal LED Indicator Operating Temperature Storage Temperature Humidity (non condensing) Storage Humidity (non condensing) Cooling Withstand Voltage Isolation Resistance Vibration (non operating) Immunity Safety Agency Approvals Conducted & Radiated EMI Recommended EMI Filter Weight (Typ) Size (WxHxD) Warranty A A V ms mA °C °C g in yrs SWS300A SWS600 85 - 265VAC (47 - 63Hz) or 120 - 370VDC 20 / 40 Meets EN61000-3-2 3.6 / 1.8A 7.2 / 3.6A <0.02%/°C >105%, Constant current style Yes, cycle AC to reset Yes, cycle AC to reset 20ms at 115/230VAC SWS300: 0.75mA , SWS600: 1.5mA None Yes None Yes None Yes None Yes, open collector output Green LED = On -10 to +65°C (See table for derating - model specific) -30 to +85°C 30 - 90% RH operating, 10 - 95%RH non operating 10 - 95% RH Internal fan I/P to Grnd 2kVAC, I/P to O/P 3kVAC, O/P to Grnd 500VAC, O/P to CNT 100VAC for 1 min >100M at 25°C & 70%RH, Output to Ground 500VDC 10 - 55Hz (sweep for 1 min)19.6m/s2 constant X, Y, Z 1 hour each plane) EN61000-4-2, -3, -4, -5, -6, -8, -11 UL60950, CSA60950, EN60950, EN50178, CE Mark EN55011 / EN55022-B, FCC Class B RSAL2006 RSAN2010 950 2000 2.05 x 4.01 x 7.8” 3.62 x 4.72 x 7.48” Two Years (1) Derate linearly to 85% load from 115VAC to 85VAC input (derate to 90% load for SWS600-3 & -5) 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 97 Disclaimer: us.tdk-lambda.com/lp/legal.htm SWS300A-600 Series Model Selector Model SWS300A-3 SWS300A-4 SWS300A-5 SWS300A-7R5 SWS300A-12 SWS300A-15 SWS300A-24 SWS300A-28 SWS300A-36 SWS300A-48 SWS600-3 SWS600-5 SWS600-12 SWS600-15 SWS600-24 SWS600-36 SWS600-48 Voltage 3.3V 4V 5V 7.5V 12V 15 24V 28V 36V 48V 3.3V 5V 12V 15V 24V 36V 48V Adjust Range 2.97 - 3.96V 3.6 - 4.8V 4.5 - 6V 6 - 9V 9.6 - 13.2V 13.2 - 18.6V 20 - 28.8V 22.4 - 33.6V 28.8 - 40V 40 - 57.6 2.97-3.96V 4.5-6V 9.6-13.2 13.2-18V 20-28.8 28.8-40V 40-57.6 Max Curr. (A) 55A 55A 55A 40A 26A 21A 13A 11A 8.8A 6.7A 100 (2) 100 (2) 50 40 25 16.7 12.5 Load Reg (mV) 40 40 40 60 96 120 120 140 180 240 40 40 96 120 120 180 240 Line Reg (mV) 20 20 20 30 48 48 48 56 72 96 20 20 48 48 48 72 96 Ripple Noise (mV) 120 120 120 120 120 120 150 150 200 240 100 100 120 120 150 200 240 Eff. (typ)%(1) 69 / 72 72 / 75 75 / 78 77 / 80 79 / 83 80 / 84 82 / 85 83 / 86 83 / 87 83 / 86 69/71 74/77 78/81 80/83 81/84 81/85 82/85 (2) Peak rating of 120A for 10s (3) 115/230VAC Outline Drawing (SWS300A) Options Suffix /CO2 Derating Descriptor Double sided conformal coating Other Industrial Products HWS SWS ZWS 15W to 1500W Single output, high reliability 50 - 1000W Single Output 5 - 240W pcb style single, output 1-800-526-2324 • www.us.tdk-lambda.com/lp/ Model SWS300A SWS600 50°C 100% 100% 55°C 91.6% 85% 60°C 83.3% 70% 65°C 50% 55% For Additional Information, please visit us.tdk-lambda.com/lp/products/sws-series.htm 98 Revision A3: Feb 2012