TQM966002 BC1/B2 BAW Duplexer Applications CDMA / UMTS handset, data card & mobile router applications using the PCS band, Band Class 1 / B2 2.5 x 2.0 x 0.90 mm Product Features Functional Block Diagram Top view Excellent triple beat performance: -88dBc Highly selective BAW duplexer achieving low insertion loss over full bandwidth and operating conditions. Rx isolation of 50dB minimum & GPS rejection of >40dB eliminating the need for a transmit filter Single-Ended (SE) 50ohm receive & transmit ports Performance -30 to +85 ºC RoHS compliant, Pb-free module package General Description Pin Configuration The TQM966002 is a high-performance Bulk Acoustic Wave (BAW) duplexer designed to meet the strict CDMA/UMTS requirements for use in the PCS band, known as Band Class 1 (BC1), and B2. TQM966002 is specifically designed to meet the high performance expectations of insertion loss, isolation and triple beat for CDMA systems over the bandwidth of BC1/B2 applications under all operating conditions. Due to the exceptional receive isolation & GPS rejection performance, no transmit SAW filter is required. The TQM966002 uses common module packaging techniques to achieve the industry standard 2.5 x 2.0 x 0.9 mm footprint. The duplexer exhibits excellent power handling capabilities. Data Sheet: Rev D 09/10/2012 © 2012 TriQuint Semiconductor, Inc. - 1 of 12 - Pin # Description 1 Receive 3 Transmit 6 Antenna 8 N/C (internal to GND) 2,4,5,7,9 Ground* *Note, see application section for details on optimal grounding Ordering Information Part No. Description TQM966002 TQM966002-EVB packaged part evaluation board Standard T/R size = 2,500 units/reel. Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ®