MQQI Series 5X7 Ceramic SMD Oscillator User Selectable Up to Four Frequencies LVDS, LVPECL OR CMOS 6 Pad Standard Package OneClock Frequency Range CMOS 10MHZ to 250MHZ Frequency Range LVDS & LVPECL 50.000MHZ to 1.50GHZ Temperature Stability* (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Aging (+25°C ±3°C) ±5ppm for first year Waveform LVPECL Supply Voltage ±5% (Vdd) +2.50 VDC Supply Current LVDS +2.50 VDC +3.30 VDC 54mA typ 20mA typ 25mA typ 23mA typ 50Ω 15pF 10 TTL Gates or 30pF 100Ω Load +3.30 VDC CMOS +2.50 VDC +3.30 VDC Vol .800V typ 1.60V typ 10% Vdd max 1.47V typ 1.60V typ Voh 1.50V typ 2.35V typ 90% Vdd min 2.15V typ 2.30V typ .650V typ .700V typ .700V typ Differential Voltage Rise/Fall Time (10% to 90% of Supply Voltage) 250pSec max 4nSec 350pSec max (See Part Number Guide for Options) Symmetry (50% of waveform) Start-up Time 10mSec max Period Jitter (RMS) <2.5pSec Phase Jitter (12KHZ to 20MHZ) <1.0pSec Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) Tri-State Operation Tristate Current Consumption (Disabled) Absolute Maximum Voltage (Vdd) 16mA 4.20 Volts DC * Inclusive of Temperature., Load and Voltage MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 06/30/11 C Pg 1 of 5 Mechanical & Environmental Detail Shock Marking Detail MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 2 = SYYWWL S Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 Part Number Guide **Frequency MQQI 5 X 7 Ceramic SMD Output C = CMOS L = LVPECL V = LVDS Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC Frequency Stability 010 = ±10 ppm 015 = ±15 ppm 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Symmetry Blank = 40/60% A = 45/55% B = 48/52% Packaging Blank = Bulk T = Tape and Reel Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Please Consult with MMD Sales Department for any other Parameters or Options **Up to Four Frequencies can be selected MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 06/30/11 C Pg 2 of 5 Mechanical Details 7 .2 0 [.2 8 3 ] M AX M XXXXX SYYW W XXXXX 2 .0 0 [.0 7 9 ] MAX 2 .5 4 [.1 0 0 ] 5 .2 0 [.2 0 5 ] M AX 2 .5 4 [.1 0 0 ] 4 5 6 3 2 1 2 .5 4 [.1 0 0 ] 4 .2 0 [.1 6 5 ] 2 .4 0 [.0 9 4 ] 1 .3 0 [.0 5 1 ] P IN 1 IN D IC A T O R 2 .5 4 [.1 0 0 ] 2 .0 0 [.0 7 9 ] 1 .8 0 [.0 7 1 ] 1 .4 0 [.0 5 5 ] D IM E N S IO N S IN B R A C K E T S A R E IN IN C H E S E X T E R N A L B Y P A S S C A P A C IT O R R E C O M M E N D E D P in C o n n e c tio n s P in P in P in P in P in P in 1 2** 3 4 5*** 6 S e e T ru th T a b le S e e T ru th T a b le G ro u n d O u tp u t C o m p lim e n ta ry O u tp u t O N L Y L V P E C L & L V D S S u p p ly V o lta g e SUGGESTED LAN D PATTERN S in g le F re q u e n c y T ris ta te N o C o n n e c tio n G ro u n d O u tp u t C o m p lim e n ta ry O u tp u t O N L Y L V P E C L & L V D S S u p p ly V o lta g e Q u a d F re q u e n c y T ru th T a b le * D u a l F re q u e n c y T ru th T a b le P in 2 C o rre sp o n d in g F re q u e n c y 0 1 F re q u e n c y 1 F re q u e n c y 2 P in 1 P in 2 '0 ' '0 ' '1 ' '1 ' '0 ' '1 ' '0 ' '1 ' C o rre s p o n d in g F re q u e n c y F re q u e n c y F re q u e n c y F re q u e n c y F re q u e n c y 1 2 3 4 '0 ' = G N D '1 ' = V d d * N o trista te w ith 4 F re q u e n c y O p tio n * * T ris ta te O p tio n A v a ila b le * * * C M O S is N o C o n n e c tio n Typical Phase Noise Offset Frequency CMOS 70.000MHZ LVPECL/LVDS 160.000MHZ LVPECL/LVDS 622.000MHZ 100Hz -88dBc/Hz -85dBc/Hz -80dBc/Hz 1KHz -115dBc/Hz -100dBc/Hz -97dBc/Hz 10KHz -120dBc/Hz -115dBc/Hz -117dBc/Hz 100KHz -125dBc/Hz -118dBc/Hz -128dBc/Hz 1MHz -130dBc/Hz -128dBc/Hz -138dBc/Hz 10MHz -145dBc/Hz -145dBc/Hz -145dBc/Hz MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 06/30/11 C Pg 3 of 5 Test Set Up OE 2 Fs Output Enable Frequency Select Output Enable Fs OE Frequency Select OE Fs Output Enable Frequency Select MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 06/30/11 C Pg 4 of 5 Tape & Reel Dimensions PITCH TAPE WIDTH REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 16.00 [.630] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 06/30/11 C Pg 5 of 5