856979 806/847 MHz Duplexer Applications For Band 20 LTE applications LTE Band 20 handsets, data cards, mobile routers Product Features Functional Block Diagram Top View Usable bandwidth 30 MHz (each band) Low loss High attenuation High Tx-Rx isolation Single-ended-Balanced Rx operation Ceramic chip-scale Package (CSP) Small Size 2.5 x 2.00 x 0.56 mm Hermetic RoHS compliant, Pb-free Gnd Ant Gnd 7 6 5 Rx Out 8 Rx Out 1 4 2 3 Gnd Tx in Gnd General Description Pin Configuration Pin # SE-Balanced Description 856979 is a high-performance Temperature Compensated Surface Acoustic Wave (TC SAW) duplexer designed to meet the strict LTE requirements for use in Band 20. 1,8 3 6 2,4,5,7,9 Rx output Tx input Antenna/Phasing inductor Ground The 856979 is specifically designed to meet the high performance expectations of insertion loss, isolation and linearity in LTE systems operating in Band 20 applications under all operating conditions. The use of TC SAW technology enables stable performance over the entire temperature range. Ordering Information Part No. Description The 856979 uses common module packaging techniques to 856979 packaged part achieve the industry standard 2.5 x 2.0 footprint. The 856979-EVB evaluation board duplexer exhibits excellent power handling capabilities. Standard T/R size = 10,000 units/reel. Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 1 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer TX – Electrical Specifications (1) Specified Temperature Range: (2) -20 to +85 ºC Parameter (3) Typical (4) Max 30 33 43 3 28 38 40 40 43 35 30 30 30 35 35 35 30 20 15 8 8 847 2.5 0.6 35 37 48 15 33 43 45 45 48 47 45 43 40 42 40 40 38 31 22 10 10 3.0 1.5 - MHz dB dB p-p dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Tx Impedance (single-ended) (7) 50 54 45 50 40 20 20 - 53 56 50 55 45 48 45 50 - Ant Impedance (single-ended)(7) - 50 - dB dB dB dB dB dB dB Center Frequency Maximum Insertion Loss (5) Amplitude Variation(9) Absolute Attenuation (6) Return Loss at Tx Return Loss at Antenna Conditions Ant-Tx Specification 832 – 862 MHz 832 – 862 MHz 10 – 771 MHz 771 – 791 MHz 791 – 821 MHz 821 – 825 MHz 925 – 960 MHz 1565.420 – 1573.374 MHz 1573.374 – 1577.466 MHz 1577.466 – 1585.420 MHz 1597.5515 – 1605.886 MHz 1664 - 1724 1805 – 1880 MHz 1884.5 – 1919.6 MHz 2110 – 2170 MHz 2400 – 2500 MHz 2500 – 2586 MHz 2586– 2620 2620– 2690 3328– 4310 4992– 6000 832 – 862 MHz 832 – 862 MHz Min Units Tx-Rx Specification Isolation 791 – 821 MHz (Differential) 832.5 – 862 MHz (Differential)(8) 791 – 821 MHz (Common-mode) 832.5 – 862 MHz (Common-mode) 1574 – 1577 MHz 1664 – 1724 MHz 2496 – 2586 MHz Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Design goal is to meet 3.0 dB Max. Need SPC data to determine actual performance 6. Relative to zero dB 7. This is the optimum impedance in order to achieve the performance shown 8. Target minimum is based on future design revision goals 9. Over any 5 MHz in-band Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 2 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer RX – Electrical Specifications (1) Specified Temperature Range: (2) -20 to +85 ºC Parameter (3) Conditions Ant-Rx Specification Center Frequency Maximum Insertion Loss Amplitude Variation(8) Absolute Attenuation (5) Return Loss at Rx Return Loss at Antenna Output phase balance Output amplitude balance(8) 791–821 MHz 791–821 MHz 10 – 760 MHz 760 – 770 MHz 832 – 862 MHz 862 – 890 MHz 890 – 910 MHz 910 – 2500 MHz 2500 – 6000 MHz 791–821 MHz 791–821 MHz 791–821 MHz 791–821 MHz IM2 product (6) (a,b) IM3 product (6) (c,d) ANT Impedance (single-ended ) (7) Rx Impedance (balanced) (7) Min Typical (4) 45 25 45 40 35 40 30 7.5 8 -7.0 -2.3 - Max Units 806 - MHz 3.0 0.6 50 40 51 44 40 44 35 9 9.5 - 3.5 1.5 8.0 0.5 dB dB p-p dB dB dB dB dB dB dB dB dB degree dB -106 -101 50 100 -104 -100 - dBm dBm Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB 6. All power levels are referenced to the antenna port. Two CW tones are applied at frequencies f1 and f2, and the resultant intermodulation product in the Rx band is measured. The first tone is applied to the Tx port, in the range f1 = 832 to 862 MHz, at +21.5 dBm (referenced to the antenna port). The second tone is -15 dBm, applied to the antenna port at f2, with the following four cases: a. f2 = 41 MHz b. f2 = 2 * f1 - 41 MHz c. f2 = f1 + 41 MHz d. f2 = 3 * f1 - 41 MHz The intermodulation product is measured at f1 - 41 MHz. 7. This is the optimum impedance in order to achieve the performance shown 8. Over any 5 MHz in-band Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 3 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer Reference Design –Ant- 50 SE In, Tx-50 SE Out , Rx-100Bal Out Schematic RX Balanced ANT Single-ended TX Single-ended Notes: 1. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 2.40 0.95 0.275 0.45 1.90 0.19x45° CHAMFER 0.525 0.45 0.275 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Design Value Description Manufactur Part Number L1_ANT 9.1 nH Chip inductor, Wire wound, 0402, ±2% MuRata LQW15AN9N1G00 L2 and L2 at Rx 4.3 nH Chip inductor, Wire-wound, 0402, ±3% MuRata LQW15AN4N3C00 er SMA N/A SMA connector Radiall USA Inc. 9602-1111-018 PCB N/A 3-layer Multiple N/A Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 4 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer Tx - Typical Performance (at room temperature) Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 5 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer Rx -Typical Performance (at room temperature) Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 6 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer TX – RX Isolation & Antenna RL Typical Performance (at room temperature) Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 7 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer Mechanical Information Package Information, Dimensions and Marking MFG site Marking code EL Package Style: CSP-10KT Dimensions: 2.5 x 2.00 x 0.56 mm M Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating Date code WWY ID dot All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm 0.56 NOM. 0.60 MAX. 2.50 The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code 2.35 0.40 0.18x45° 2.00 CHAMF. 1.85 0.40 0.90 Tape and Reel Information Standard T/R size = 10,000 units/reel. All dimensions are in millimeters 8.8 Ø330 2.7 4.0 ID dot 0.3 2.0 Ø 1.5 A 1.75 3.5 Direction of travel Ø102 Ø20.2 Ø13.0 2.0 8.0 2.75 1.1 2.23 Section A-A 4.0 Ø 1.0 A Absolute Maximum Ratings Parameter Rating Operating Temperature Storage Temperature Input Power(1) at TX -20 to +90 oC -40 to +90 oC +29 dBm (1) 55oC equivalent 5000 hours. All ports matched to 50 Ohms. Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 8 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856979 806/847 MHz Duplexer Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260°C Refer to Soldering Profile for recommended guidelines. ESD Rating: Class 0 Value: Passes ≤ 150 V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). ESD Rating: Class N/A Value: Passes ≤ 100 V Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: [email protected] Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: [email protected] Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev D 09/28/2012 © 2012 TriQuint Semiconductor, Inc. - 9 of 9 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ®