DT65-0009 Positive Output Plastic Detector, 840 - 2200 MHz Features V 1.00 SO-14 n High Output Sensitivity n Small, SMT, Plastic SO-14 Package n Single Design to Cover Cellular, PCS and UMTS Bands n Single Ended or Differential Output Description M/A-COM’s DT65-0009 is a plastic detector in an SMT plastic package. The DT65-0009 usable input power range is from Tss to +20 dBm. Square law response is from Tss to approximately –15 dBm, linear range is between –15 dBm and approximately +6 dBm with saturation through +20 dBm and burnout occurring beyond +23 dBm. This bias schottky detector offers generally high sensitivity (K). The RF power handling of these detectors make them particularly useful in signal processing and power monitoring for telecommunication equipment. An internal reference diode is provided for use as a differential detector. Electrical Specifications: TA = 25°C, VEE = -5.0V, Load Resistance = 30K Ohms Parameter Test Conditions Frequency Units Min. Typ. Max. Voltage Sensitivity (K) RF IN = -20 dBm 840-2200 MHz mV/mW 1800 2100 — In-Band Flatness RF IN = 0 dBm 840-2200 MHz dB — — 0.50 Tss RF IN = 0 dBm 1.5 GHz dBm — -47 -45 RF Bypass Capacitance 840-2200 MHz pF — 10 — Video Resistance 840-2200 MHz Ohms — 300 — Positive Output Plastic Detector, 840 - 2200 MHz DT65-0009 V 1.00 Recommended PCB Layout Functional Diagram -5V DET Out RF IN REF Voltage Sensitivity (K) Typ. (mV/mW)1 Pin Configuration Input Power -40°C +25°C +85°C Pin # Function Pin # -20 dBm 2420 2100 1830 -15 dBm 1880 1680 1560 -10 dBm 1315 1220 -5 dBm 830 0 dBm 500 +5 dBm +10 dBm Function 1 GND 8 GND 2 RF IN 9 REF Out 1185 3 GND 10 VEE 800 770 4 GND 11 GND 490 480 5 N/C 12 N/C 300 285 290 6 N/C 13 DET Out 175 177 170 7 GND 14 GND 1. VEE = -5V, Load Resistance = 30K Ohms. Absolute Maximum Ratings 2 Ordering Information Parameter Absolute Maximum Part Number Package Max Input Power +23 dBm DT65-0009 Bulk Packaging Applied Voltage (VEE) -10V DT65-0009TR Tape and Reel (1K Reel) Operating Temperature -40°C to +85°C DT65-0009-TB Units Mounted on Test Board Storage Temperature -65°C to +125°C 2. Operation of this device above any one of these parameters may cause permanent damage. Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2