Low Cost Two-Way SMT Power Divider 824—960 MHz DS52-0001 DS52-0001 /RZ&RVW7ZR:D\6073RZHU'LYLGHU 0+] Features • • • • • • • SOIC-8 Small Size and Low Profile Industry Standard SOIC-8 SMT Plastic Package Excellent Amplitude and Phase Balance Superior Repeatability Typical Insertion Loss 0.5 dB Typical Isolation 23 dB 1 Watt Power Handling Description M/A-COM’s DS52-0001 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel. The DS52-0001 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Ordering Information Part Number Package DS52-0001 SOIC-8 Lead Plastic Package DS52-0001-TR Forward Tape and Reel1 DS52-0001-RTR Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25°C Parameter Units Min Typ Max dB — 0.5 0.6 Isolation dB 15 23 — VSWR Amplitude Balance — dB — — 1.2:1 0.05 1.4:1 0.15 ° — 0.5 1.5 Insertion Loss Phase Balance Above 3.0dB 1. All specifications apply with a 50-Ohm source and load impedance. S 1558B VER 2 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Low Cost Two-Way SMT Power Divider 824—960 MHz Absolute Maximum Ratings1 Parameter DS52-0001 Functional Diagram ³ Absolute Maximum Input Power² 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding these limits may cause permanent damage. 2. With Internal load dissipation of 0.125 W maximum. Recommended PCB Configuration (Dimensions in Inches) Typical Performance @ +25°C Isolation vs. Frequency Insertion Loss vs. Frequency -5 -0.1 -0.2 -10 Isolation dB Insertion Loss dB 0 -0.3 -0.4 -0.5 -15 -20 -0.6 -0.7 824 858 892 926 Fre que ncy (M Hz) -25 824 960 VSWR vs. Frequency 858 892 926 Frequency MHz 960 Phase Balance vs. Frequency (Relative to RF1) 1.5 Phase, degrees 0.2 1.4 0.15 1.3 VSWR Input Output 1.2 0.05 1.1 1 824 0.1 858 892 926 Frequency MHz 960 0 824 858 892 926 Frequency MHz 960 S 1558B VER 2 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.