Low Cost Two-Way GMIC SMT Power Divider — 2200 - 2500MHz DS52-0007 DS52-0007 Low Cost Two-Way GMIC SMT Power Divider 2200 - 2500 MHz Features • • • • • SOT-25 Small Size and Low Profile Industry Standard SOT-25 SMT Plastic Package Typical Isertion Loss: 1.0 dB Typical Amplitude Balance 0.1 dB 1 Watt Power Handling Description M/A-COM’s DS52-0007 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-25 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. The DS52-0007 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. All lower dimensions are in millimeters Ordering Information Part Number Package DS52-0007 SOT-25Lead Plastic Package DS52-0007-TR Forward Tape and Reel1 DS52-0007-RTR Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25°C Units Min Typ Max Insertion Loss above 3.0dB Parameter dB — 1.0 1.1 Isolation dB 15 22 — — — — — 1.6 : 1 1.3 : 1 1.8 : 1 1.5 : 1 dB — 0.1 0.25 Degrees — 2.0 4.0 VSWR RF Input RF1, RF2 Outputs Amplitude Balance Phase Balance 1. All specifications apply with a 50-Ohm source and load impedance. V2.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S1502 A Low Cost Two-Way GMIC SMT Power Divider — 2200 - 2500MHz Recommended PCB Configuration DS52-0007 Functional Diagram (Dimensions in Inches) Absolute Maximum Ratings1 Parameter Absolute Maximum Input Power2 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W Maximum. CIRCUIT MATERIAL: FR-4, .016 THICK Typical Performance @ +25°C Isolation Vs Frequency Insertion Loss Vs Frequency -14 ISOLATION (dB) INSERTION LOSS (dB) 0 -0.5 -1 -1.5 2200 2275 2350 2425 -16 -18 -20 -22 -24 -26 2200 2275 2500 PHASE, DEGREES 2 VSWR (Ratio) 1.9 INPUT 1.6 1.5 OUTPUT 1.4 1.3 1.2 1.1 1 2200 2275 2500 Phase Balance Vs Frequency Relative to RF1 VSWR Vs Frequency 1.7 2425 FREQUENCY(MHz) FREQUENCY(MHz) 1.8 2350 2350 2425 2500 FREQUENCY (dB) 0 -1 -2 -3 2200 2275 2350 2425 2500 FREQUENCY(MHz) V2.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S1502 A