NTCLE101E3...SB0 www.vishay.com Vishay BCcomponents NTC Thermistors, Radial Leaded Special Accuracy FEATURES • Excellent accuracy between 25 °C and 85 °C • High stability over a long life • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS QUICK REFERENCE DATA PARAMETER Resistance value at 25 °C Tolerance on R25-value B25/85-value Tolerance on B25/85-value Operating temperature range at zero dissipation Accuracy for T measured between 25 °C and 85 °C Maximum power dissipation at 55 °C Dissipation factor (for information only) Response time (for information only) (1) Thermal time constant (for information only) Climatic category (LCT/UCT/days) Weight • Temperature measurement, sensing, and control VALUE 4.7K to 100K ± 2.19 to ± 2.29 3977 to 4190 ± 0.75; ± 1.5 UNIT % K % - 40 to + 125 °C ± 0.5 °C 250 mW 7 mW/K 1.2 s Grey lacquered body. 11 s MOUNTING DESCRIPTION These thermistors have a negative temperature coefficient. The device consists of a chip with two tin-plated copper leads. It is grey lacquered and not insulated. These thermistors are very accurate (± 0.5 °C) over a trajectory from 25 °C to 85 °C. PACKAGING The thermistors are packed in cardboard boxes, each box contains 500 units. MARKING By soldering in any position. Not intended for potted applications. 40/125/56 0.22 g DESIGN-IN SUPPORT Note (1) Response time in silicone oil MS 200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 °C in air to 85 °C in oil. R(T) table spreadsheet available on request at [email protected]. Accuracy over the whole temperature range, see at the resistance vs. temperature tables. ELECTRICAL DATA AND ORDERING INFORMATION R25 () R25/R25 (%) B25/85 (K) B/B (%) SAP MATERIAL AND ORDERING NUMBER NTCLE101E3...... OLD 12NC CODE 2381 640 ..... 4700 2.19 3977 0.75 472SB0 10472 10 000 2.19 3977 0.75 103SB0 10103 47 000 2.23 4090 1.5 473SB0 10473 100 000 2.29 4190 1.5 104SB0 10104 DIMENSIONS in millimeters 3 max. 3.3 ± 0.5 5 max. 2±1 2.54 17 min. Ø 0.6 Revision: 06-Jul-11 1 Document Number: 29046 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE101E3...SB0 www.vishay.com Vishay BCcomponents DERATING TOLERANCE CURVE T (K) P (%) 100 1.0 0.5 0 - 40 - 25 0 25 40 60 85 110 125 T(°C) - 0.5 0 - 40 - 1.0 0 55 125 Tamb (°C) Power derating curve Note • Zero power is considered as measuring power max. 1 % of max. power RESISTANCE VALUES AT INTERMEDIATE VALUES WITH R25 AT 4.7 k AND 10 k TEMPERATURE (°C) R/R25 R/R (%) (%/K) TMAX. (± °C) - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 33.21 23.99 17.52 12.93 9.636 7.250 5.505 4.216 3.255 2.534 1.987 1.570 1.249 1.000 0.8059 0.6535 0.5330 0.4372 0.3605 0.2989 0.2490 0.2084 0.1753 0.1481 0.1256 0.1070 0.09154 0.07860 0.06773 0.05857 0.05083 0.04426 0.03866 0.03387 5.04 4.76 4.50 4.25 4.01 3.77 3.55 3.33 3.12 2.92 2.73 2.54 2.36 2.19 2.13 2.07 2.01 1.95 1.90 1.85 1.80 1.75 1.71 1.67 1.62 1.58 1.70 1.81 1.92 2.03 2.13 2.24 2.34 2.43 - 6.62 - 6.39 - 6.18 - 5.98 - 5.78 - 5.60 - 5.42 - 5.25 - 5.09 - 4.93 - 4.79 - 4.64 - 4.51 - 4.38 - 4.25 - 4.13 - 4.02 - 3.91 - 3.80 - 3.70 - 3.60 - 3.51 - 3.42 - 3.33 - 3.25 - 3.17 - 3.09 - 3.01 - 2.94 - 2.87 - 2.80 - 2.74 - 2.67 - 2.61 0.76 0.75 0.73 0.71 0.69 0.67 0.65 0.63 0.61 0.59 0.57 0.55 0.52 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.55 0.60 0.65 0.71 0.76 0.82 0.87 0.93 Revision: 06-Jul-11 2 RT () NTCLE101E3472SB0 156 084 112 753 82 344 60 765 45 288 34 075 25 872 19 814 15 300 11 909 9340 7378 5869 4700 3788 3071 2505 2055 1694 1405 1170 979.7 823.9 696.0 590.5 503.0 430.2 369.4 318.3 275.3 238.9 208.0 181.7 159.2 NTCLE101E3103SB0 332 094 239 900 175 200 129 287 96 358 72 500 55 046 42 157 32 554 25 339 19 872 15 698 12 488 10 000 8059 6535 5330 4372 3605 2989 2490 2084 1753 1481 1256 1070 915.4 786.0 677.3 585.7 508.3 442.6 386.6 338.7 Document Number: 29046 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE101E3...SB0 www.vishay.com Vishay BCcomponents RESISTANCE VALUES AT INTERMEDIATE VALUES WITH R25 AT 47 k RT () TEMPERATURE (°C) R/R25 R/R (%) (%/K) TMAX. (± °C) - 40 33.81 8.10 - 6.54 1.24 1 589 068 - 35 24.50 7.53 - 6.34 1.19 1 151 627 - 30 17.93 6.99 - 6.15 1.14 842 790 - 25 13.25 6.47 - 5.96 1.09 622 597 - 20 9.875 5.97 - 5.79 1.03 464 110 - 15 7.425 5.49 - 5.62 0.98 348 989 - 10 5.630 5.03 - 5.45 0.92 264 628 -5 4.304 4.59 - 5.30 0.87 202 280 0 3.315 4.16 - 5.14 0.81 155 823 NTCLE101E3473SB0 5 2.573 3.75 - 5.00 0.75 120 932 10 2.011 3.35 - 4.86 0.69 94 528 15 1.583 2.96 - 4.72 0.63 74 399 20 1.254 2.59 - 4.59 0.56 58 945 25 1.000 2.23 - 4.47 0.50 47 000 30 0.8023 2.17 - 4.35 0.50 37 706 35 0.6474 2.12 - 4.23 0.50 30 429 40 0.5255 2.06 - 4.12 0.50 24 696 45 0.4288 2.01 - 4.01 0.50 20 154 50 0.3518 1.95 - 3.91 0.50 16 534 55 0.2901 1.90 - 3.81 0.50 13 633 60 0.2403 1.86 - 3.71 0.50 11 296 65 0.2001 1.81 - 3.62 0.50 9404 70 0.1673 1.77 - 3.53 0.50 7865 75 0.1406 1.72 - 3.44 0.50 6607 80 0.1186 1.68 - 3.36 0.50 5573 85 0.1004 1.64 - 3.28 0.50 4721 90 0.08542 1.88 - 3.20 0.59 4015 95 0.07292 2.11 - 3.13 0.68 3427 100 0.06248 2.34 - 3.05 0.77 2936 105 0.05372 2.56 - 2.98 0.86 2525 110 0.04635 2.78 - 2.92 0.95 2179 115 0.04013 2.99 - 2.85 1.05 1886 120 0.03485 3.19 - 2.79 1.14 1638 125 0.03037 3.39 - 2.73 1.24 1427 Revision: 06-Jul-11 3 Document Number: 29046 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE101E3...SB0 www.vishay.com Vishay BCcomponents RESISTANCE VALUES AT INTERMEDIATE VALUES WITH R25 AT 100 k RT () TEMPERATURE (°C) R/R25 R/R (%) (%/K) TMAX. (± °C) - 40 36.66 8.30 - 6.69 1.24 3 666 299 - 35 26.38 7.72 - 6.49 1.19 2 637 588 - 30 19.17 7.16 - 6.29 1.14 1 916 576 - 25 14.06 6.63 - 6.10 1.09 1 406 111 - 20 10.41 6.12 - 5.92 1.03 1 041 184 - 15 7.778 5.63 - 5.75 0.98 777 846 - 10 5.861 5.15 - 5.58 0.92 586 097 -5 4.453 4.70 - 5.42 0.87 445 257 0 3.409 4.26 - 5.26 0.81 340 942 NTCLE101E3104SB0 5 2.631 3.84 - 5.11 0.75 263 054 10 2.044 3.43 - 4.97 0.69 204 446 15 1.600 3.03 - 4.83 0.63 160 014 20 1.261 2.65 - 4.70 0.56 126 087 25 1.000 2.29 - 4.57 0.50 100 000 30 0.7981 2.23 - 4.45 0.50 79 808 35 0.6408 2.17 - 4.33 0.50 64 077 40 0.5175 2.11 - 4.22 0.50 51 745 45 0.4202 2.05 - 4.11 0.50 42 021 50 0.3431 2.00 - 4.00 0.50 34 308 55 0.2816 1.95 - 3.90 0.50 28 156 60 0.2322 1.90 - 3.80 0.50 23 222 65 0.1925 1.85 - 3.71 0.50 19 246 70 0.1602 1.81 - 3.62 0.50 16 025 75 0.1340 1.77 - 3.53 0.50 13 402 80 0.1126 1.72 - 3.45 0.50 11 258 85 0.09496 1.68 - 3.36 0.50 9496 90 0.08042 1.93 - 3.28 0.59 8042 95 0.06837 2.17 - 3.21 0.68 6837 100 0.05835 2.40 - 3.13 0.77 5835 105 0.04998 2.63 - 3.06 0.86 4998 110 0.04296 2.85 - 2.99 0.95 4296 115 0.03705 3.06 - 2.93 1.05 3705 120 0.03206 3.27 - 2.86 1.14 3206 125 0.02783 3.47 - 2.80 1.24 2783 Revision: 06-Jul-11 4 Document Number: 29046 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000