MA4P290-1225T PIN Diode π Quad Attenuator Rev. V3 Package Outline (Topview) Features • 4 PIN diodes in a SOT-25 Plastic Package • Externally Selectable Bias and RF Matching Network • Lead-Free (RoHS Compliant) Equivalents Available with 260 °C Reflow Compatibility • 5 – 3,000 MHz Useable Frequency Band • + 45 dBm IIP3 @ 1 GHz (50 Ω) • 2.8 dB Loss @ 1 GHz (50 Ω) • 36 dB Attenuation @ 1 GHz (50 Ω) PIN 3 PIN 2 PIN 1 Topview Description and Applications M/A-COM's MA4P290-1225T & MADP-00716712250T RoHs equivalent product is a wideband, moderate insertion loss, high IP3, PIN Diode π Quad Attenuator in a low-cost, surface mount SOT25 package. Four PIN Diodes in one package reduce circuit parasitics and improve circuit density. These PIN Diode Attenuators perform well where Variable RF Amplitude Control is required in 50 and 75 Ω circuit applications. Wideband Attenuation Range, Frequency Flatness, and Input IP3 make these devices suitable for better power level control in RF Amplifiers. Absolute Maximum Ratings @ 25 °C 1 Parameter Absolute Maximum Operating Temperature -65 °C to +125 °C Storage Temperature (0 mW Dissipated Power) -65 °C to +150 °C Junction Temperature +175 °C DC Voltage at Temperature Extremes l -200 V l DC Current per diode 200 mA Mounting Temperature +235 °C for 10 seconds PIN 4 PIN 5 PIN Configuration 2 PIN Function PIN Function 1 RF INPUT 4 Shunt 1 Bias 2 Series Bias 5 Shunt 2 Bias 3 RF OUTPUT 2. RF INPUT and RF OUTPUT are Functionally Symmetrical Standard Part RoHs Equivalent Part MA4P290-1225T MADP-007167-12250T 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode π Quad Attenuator Rev. V3 Electrical Specifications @ 25 °C Parameter Condition Unit Vr = 200 V μA Capacitance (CT) F = 1 MHz, V = 50 V pF .20 Resistance (RS) F = 100 MHz, I = 1 mA Ω 85 Resistance (RS) F = 100 MHz, I = 10 mA Ω 11 Resistance (RS) F = 100 MHz, I = 100mA Ω 3 Minority Carrier Lifetime (TL) IF = 10 mA μS 2.7 μm 175 Reverse Current (IR) I Region Width Typical Max. 10 .30 16 Typical 50 Ω SOT-25 RF Performance @ +25 °C using Wide Band RF Circuit Design ( Values Shown include Through Loss Calibrated Out of RF Test Circuit ) Parameter Insertion Loss Return Loss Attenuation Input IP3 Input IP3 Input IP3 Frequency Range 50 – 3,000 MHz 50 – 3,000 MHz 50 – 3,000 MHz 50 – 3,000 MHz 50 – 3,000 MHz 50 – 3,000 MHz Test Conditions Units Min. Typ. 13 mA / Series Diode and 3.7 V Shunt 1 and 2 Bias F = 1 GHz dB -2.8 13 mA / Series Diode and 3.7 V Shunt 1 and 2 Bias F = 1 GHz dB -15 0 mA / Series Diode and 3.7 V Shunt 1 and 2 Bias F = 1 GHz dB -36 0 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 1010 MHz, F2 = 1020 MHz dBm 45 + 10 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 1010 MHz, F2 = 1020 MHz dBm 43.5 0 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 110 MHz, F2 = 120 MHz dBm 43.5 Input IP3 50 – 3,000 MHz + 10 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 110 MHz, F2 = 120 MHz dBm 39 Settling Time 50 – 3,000 MHz Within 1 dB of Final Attenuation Value F = 1 GHz uS 10 RF C.W. Incident Power 50 – 3,000 MHz 0 – 20 V Series Diode Bias and 3.7V Shunt 1 and 2 Bias dBm + 20 Max. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode π Quad Attenuator Rev. V3 Typical Diode Performance Curves Total Capacitance vs. Reverse Voltage Series Resistance vs. Bias Current 1 Total Capacitance (pF) 1000.00 100.00 10.00 1.00 0.10 100 MHz 1.0 GHz 0.1 0 20 40 60 80 0.1 100 1 10 100 Reverse Voltage (V) Bias Current (mA) Typical Attenuator Performance INPUTIP3 vsVOLTAGE IP3 (dBm) 50.00 40.00 30.00 100MHz 1000MHz 20.00 10.00 0.00 0 10 20 30 40 Voltage(V) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode π Quad Attenuator Rev. V3 Typical Attenuator Performance ATTENUATIO N vs. FREQUENCY 0.00 -10.00 Attenuation (dB) -20.00 0 volts 1 volt 4 volt 10 volt 20 volt 40 volt -30.00 -40.00 -50.00 -60.00 -70.00 5.00E+07 5.50E+08 1.05E+09 1.55E+09 2.05E+09 2.55E+09 Frequen cy (Hz) ATTENUATION FLATNESS vs. FREQUENCY 0.2 0.2 0V Flatness (dB/MHz) 0.1 1V 4V 10V 0.1 20V 40V 0.0 0.0 0.00E+0 5.00E+0 1.00E+0 1.50E+0 Frequency (Hz) 2.00E+0 2.50E+0 3.00E+0 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode π Quad Attenuator Rev. V3 RETURN LOSS vs. FREQUENCY 0.00 Return Loss (dB) -5.00 0 volt 1 volt 4 volt 10 volt 20 volt 40 volt -10.00 -15.00 -20.00 -25.00 5.00E+07 5.50E+08 1.05E+09 1.55E+09 2.05E+09 2.55E+09 Frequency (Hz) 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode π Quad Attenuator Rev. V3 Functional Schematic PIN 2 Series Bias PIN 3 RF Out PIN 1 RF In PIN 4 Shunt 1 Bias PIN 5 Shunt 2 Bias SOT-25 Case Style 1225 Dim Inches Millimeters Min. Max. Min. Max. A .1103 .1181 2.80 3.10 B .1023 .1181 2.6 3.00 C 0.0355 .0512 0.9 1.30 D 0.0591 .0669 1.5 1.70 E .0374 REF. 0.95 REF. F .0138 .0197 .35 .50 G .0031 0.0079 .08 0.2 H .0002 .0059 .05 .15 J .0138 .0216 .35 .55 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.