PA01S series 1W DC/DC Converter, SIP-Package FEATURES Efficiency up to 80% SIP Package with Industry Standard Pinout Package Dimension: 3.3V&5V & 12V Models: 11.5 x6.1 x10.2mm (0.45” x0.24” x0.40”) 24V Models,: 11.5 x7.1 x10.2mm (0.45” x0.28” x0.40”) Isolation Voltage 1000VDC Operating Temperature range - 40°C to +85°C Lead free ,RoHs Compliant >2 MHours MTBF 3 Years Product Warranty The PA01S series are miniature, SIP Package, isolated 1W DC/DC converters with 1,000VDC isolation. It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. Model List Model Number PA01S0303A PA01S0305A PA01S0503A PA01S0505A PA01S0509A PA01S0512A PA01S0515A PA01S1205A PA01S1209A PA01S1212A PA01S1215A PA01S2405A PA01S2409A PA01S2412A PA01S2415A Input Voltage (Range) Output Voltage VDC 3.3 (2.97 ~ 3.63) 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) Output Current Input Current Load Maxcapacitive Regulation Load @Max. Load @No Load Max. Min. VDC mA mA mA(typ.) 3.3 5 3.3 5 9 12 15 5 9 12 15 5 9 12 15 260 200 260 200 110 84 67 200 110 84 67 200 110 84 67 6 4 6 4 2 1.5 1 4 2 1.5 1 4 2 1.5 1 351 394 238 290 260 262 258 117 107 106 105 60 54 53 53 mA(typ.) 35 30 13 7 Efficiency (typ.) @Max. Load % (max.) 14 14 11 11 8 7 6 9 5 5 4 8 5 4 4 uF 33 33 33 33 % 74 77 72 69 76 77 78 71 77 79 80 70 76 79 79 Input Characteristics Item Input Voltage Range Input Surge Voltage (1 sec. max.) Reverse Polarity Input Current Input Filter Internal Power Dissipation DS_PA01S_09132012 Model 3.3V Input Models 5V Input Models 12V Input Models 24V Input Models 3.3V Input Models 5V Input Models 12V Input Models 24V Input Models Min. 2.97 4.5 10.8 21.6 -0.7 -0.7 -0.7 -0.7 --- All Models --- Typ. Max. 3.3 3.63 5 5.5 12 13.2 24 26.4 --6 --9 --18 --30 --0.3 Internal Capacitor --450 Unit VDC A mW E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Output Characteristics Item Output Voltage Accuracy Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Conditions Min. ----- For Vin Change of 1% Io=20% to 100% Typ. Max. ±1.0 ±3.0 ±1.2 ±1.5 See Model -List 100 150 --200 --15 ±0.01 ±0.02 0.5 Second Max. --------- Over Line, Load & Temp. Unit % % mV P-P mV P-P mV rms %/℃ General Characteristics Item I/O Isolation Voltage (rated) Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 60 100 pF 50 90 110 KHz 2,000,000 ----- ----- Hours Switching Frequency MTBF (calculated) @25℃, Ground Benign Recommended Outside Input Fuse 3.3V Input Models 5V Input Models 12V Input Models 24V Input Models 800mA Slow-Blow Type 500mA Slow-Blow Type 200mA Slow-Blow Type 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Conditions Min. Max. Unit Ambient -40 +85 ℃ ℃ Case Temperature --- +90 Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- Power Derating Curve (5V Output Only) (All Other Output) Notes 1 2 3 4 5 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications are subject to change without notice. DS_PA01S_09132012 E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Mechanical Drawing Mechanical Dimensions Pin Connections [0.13] 10.2 [0.40] 3.2 0.5 [0.02] 1 1 .5 [0 .4 5 ] 3 X 2 .5 4 [3 X 0 .1 0 ] 3 B o tto m 2 +Vin 3 -Vout 4 +Vout 1.8 [0.07] 0.25 [0.01] 4 T 2 -Vin T: 7.1mm(0.28 inch) for 24V Input Models 1 0 .5 [0 .4 1 ] 1 Function 1 T: 6.1mm(0.24 inch) for 3.3V&5V&12V Input Models 0 .5 [0 .0 2 ] 0 .8 [0 .0 7 ] Pin V ie w ¾ All dimensions in mm (inches) ¾ Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ¾ 0 .5 0 [0 .0 2 ] Pins ±0.05(±0.002) Physical Outline CaseSize(3.3V,5V,12V Input) Case Size(24V Input) : 11.5x6.1x10.2mm (0.45x0.24x0.40 Inches) : 11.5x7.1x10.2mm (0.45x0.28x0.40 Inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Case Material : Weight(3.3V,5V, 12V Input) Weight(24V Input) : : 1.3g 1.7g Part Numbering System P A 01 S 03 03 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three (3) years limited warranty.Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PA01S_09132012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3