DELTA PI01S

PI01S/D Sries
1W DC/DC CONVERTER, High isolation, SIP-Package
FEATURES

Efficiency up to 75%

SIP Package with Industry Standard Pinout

High Isolation Volage 6000 VDC

Lead free ,RoHs Complian

Industrial & Medical Safety Approval

Operating Temperature range - 25°C to +85°C

Low isolation Capacitance

>2 MHours MTBF

3 Years Product Warranty
The PI01S/D series are miniature, SIP Package, isolated 1W DC/DC converters with 6,000VDC isolation. It allows a wide
operating temperature range of –25°C to +85°C. With high isolation, PI01S/D is suitable for all kinds of medical device
application. These high isolated DC/DC converters are the latest offering from a world leader in power systems technology and
manufacturing ― Delta Electronics, Inc.
Model List
Model
Number
Input
Voltage
(Range)
Output
Voltage
Max.
Min.
VDC
VDC
mA
mA
mA(typ.)
5
200
4
303
10
12
80
2
291
8
15
65
1
295
8
±5
±100
±2
303
PI01D0512A
±12
±40
±1
267
8
PI01D0515A
±15
±35
±1
287
8
PI01S1205A
5
200
4
126
10
PI01S1212A
12
80
2
121
8
15
65
1
123
8
66
±5
±100
±2
126
10
66
PI01D1212A
±12
±40
±1
108
8
PI01D1215A
±15
±35
±1
117
8
PI01S0505A
PI01S0512A
PI01S0515A
PI01D0505A
PI01S1215A
PI01D1205A
5
(4.5 ~ 5.5)
12
(10.8 ~ 13.2)
Output Current
Input Current
Load
Regulation
Max. capacitive
Load
% (max.)
uF
@Max. Load @No Load
mA(typ.)
55
30
Efficiency
(typ.)
@Max. Load
%
66
680
66
66
10
66
220*
72
73
66
680
220*
66
74
75
* For each output
DS_PI01S/D_03202012
E-mail: [email protected]
http://www.delta.com.tw/dcdc
P1
Input Characteristics
Parameter
Model
5V Input Models
12V Input Models
5V Input Models
12V Input Models
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Reverse Polarity Input Current
Input Filter
Internal Power Dissipation
Min.
4.5
10.8
-0.7
-0.7
---
Typ.
5
12
-------
All Models
Max.
5.5
13.2
9
29
0.3
Unit
VDC
650
mW
A
LC Filter
---
---
Output Characteristics
Parameter
Output Voltage Accuracy
Output Voltage Balance
Line Regulation
Load Regulation
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Conditions
Dual Output, Balanced Loads
For Vin Change of 1%
Io=20% to 100%
Over Line, Load & Temp.
Temperature Coefficient
Short Circuit Protection
Min.
-------
Typ.
Max.
±1.0
±3.0
±0.1
±1.0
±1.2
±1.5
See Model Selection Guide
100
150
--200
--15
---------
±0.01
±0.02
0.5 Second Max.
Unit
%
%
%
mV P-P
mV P-P
mV rms
%/℃
Isolation and Safety Standards
Parameter
Conditions
Min.
Typ.
Max.
Unit
60 Seconds
3000
---
---
VACrms
I/O Isolation Test Voltage
Flash tested for 1 Second
4500
---
---
VPK
I/O Isolation Resistance
500 VDC
10
---
---
GΩ
20
pF
I/O Isolation Voltage (rated)
I/O Isolation Capacitance
100KHz, 1V
--15
cUL/UL60950-1, CSA C22.2 No. 60950-1-03
UL60601-1,CSA C22.2 No.601-1
IEC/EN 60950-1, IEC/EN 60601-1
IEC60950-1 CB report, cUL/UL 60950-1 certificate
UL60601-1 UL certificate
Safety Standards
Approvals
General Characteristics
Parameter
Conditions
Min.
Typ.
Max.
Unit
50
80
100
KHz
2,000,000
---
---
Hours
Switching Frequency
MTBF (calculated)
MIL-HDBK-217F@25℃, Ground Benign
Recommended Input Fuse
5V Input Models
12V Input Models
500mA Slow-Blow Type
200mA Slow-Blow Type
Environmental Specifications
Parameter
Conditions
Min.
Max.
Unit
Ambient
-25
+85
℃
Case Temperature
---
+90
℃
Storage Temperature Range
-50
+125
℃
Humidity (non condensing)
---
95
% rel. H
260
℃
Operating Temperature Range (with Derating)
Cooling
Free-Air convection
Lead Temperature (1.5mm from case for 10Sec.)
---
DS_PI01S/D_03202012
E-mail: [email protected]
http://www.delta.com.tw/dcdc
P2
Power Derating Curve
100
Natural
convection
Output Power (%)
80
100LFM
200LFM
60
400LFM
40
20
0
~
-25
0
20
40
60
80
100 110
Ambient Temperature
Notes
1
2
3
4
5
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Ripple & Noise measurement bandwidth is 0-20MHz.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will
not damage these modules; however they may not meet all specifications listed.
All DC/DC converters should be externally fused at the front end for protection.
Specifications subject to change without notice.
DS_PI01S/D_03202012
E-mail: [email protected]
http://www.delta.com.tw/dcdc
P3
Mechanical Drawing
Mechanical Dimensions
Pin Connections
3.50 2.54
[0.14][0.10]
7.62
[0.30]
Single Output
Dual Output
1
+Vin
+Vin
-Vin
-Vin
12.5 [0.49]
0.5 [0.02]
0.5
[0.02]
Pin
2
5
-Vout
-Vout
6
No Pin
Common
3.2
[0.13]
22.0 [0.87]
7
+Vout
+Vout
►All dimensions in mm (inches)
2X2.54
[2X0.10]
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
21.0 [0.83]
6
7
0.25 [0.01]
0.50
[0.02]
5
2.0 [0.08]
2
7.5 [0.30]
Bottom View
1
Physical Outline
Case Size
:
22.0x7.5x12.5mm (0.87x0.30x0.49 Inches)
Case Material
:
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Weight
:
3.9g
DS_PI01S/D_03202012
E-mail: [email protected]
http://www.delta.com.tw/dcdc
P4
Part Numbering System
P
I
01
S
05
12
A
Form factor
Family series
Watt
Number of
Outputs
Input Voltage
Output
Voltage
Option Code
D-DIP
P-SIP
S-SMD
A~Z
01:1W
02:2W
03:3W
04:4W
06:6W
03:3.3V
05: 5V
12:12V
24: 24V
48:48V
03:3.3V
05: 5V
12:12V
15: 15V
24: 24V
S - Single
D- Dual
A - Std. Functions
WARRANTY
Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta.
Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any
infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under
any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice.
DS_PI01S/D_03202012
E-mail: [email protected]
http://www.delta.com.tw/dcdc
P5