MOTOROLA Freescale Semiconductor, Inc. Order this document by MHL19926/D SEMICONDUCTOR TECHNICAL DATA The RF Line PCS Band RF Linear LDMOS Amplifier MHL19926 Freescale Semiconductor, Inc... Designed for ultra--linear amplifier applications in 50 Ohm systems operating in the PCS frequency band. A silicon FET Class A design provides outstanding linearity and gain. In addition, the excellent group delay and phase linearity characteristics are ideal for digital modulation systems, such as TDMA, EDGE and CDMA. • Third Order Intercept Point: 50 dBm Typ • Power Gain: 29.4 dB Typ (@ f = 1960 MHz) • Excellent Phase Linearity and Group Delay Characteristics • Ideal for Feedforward Base Station Application 1930--1990 MHz, 10 W, 29.4 dB RF LINEAR LDMOS AMPLIFIER CASE 301AY--01, STYLE 1 ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Symbol Value Unit DC Supply Voltage VDD 30 Vdc RF Input Power Pin +17 dBm Storage Temperature Range Tstg --40 to +100 °C Operating Case Temperature Range TC --20 to +100 °C Rating ELECTRICAL CHARACTERISTICS (TC = +25°C; VDD = 26 Vdc; 50 Ω System) Characteristic Supply Current Symbol Min Typ Max Unit IDD — 1 1.05 A Power Gain (f = 1960 MHz) Gp 28.4 29.4 30.4 dB Gain Flatness (f = 1930--1990 MHz) GF — 0.3 0.5 dB Power Output @ 1 dB Compression (f = 1960 MHz) P1 dB 39 40 — dBm Input VSWR (f = 1930--1990 MHz) VSWRin — 1.2:1 1.5:1 Third Order Intercept (f1 =1957 MHz, f2=1962 MHz) ITO 49.5 50 — dBm Noise Figure (f = 1990 MHz) NF — 4.2 5 dB NOTE -- CAUTION -- MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and packaging MOS devices should be observed. REV 2 MOTOROLA RF DEVICE DATA Motorola, Inc. 2003 For More Information On This Product, Go to: www.freescale.com MHL19926 1 Freescale Semiconductor, Inc. PACKAGE DIMENSIONS A G B 0.51 (0.020) A B T A M S M R DIM A B C D E F G H J K L M N P Q R S W S 1 2 3 4 5 J 5X Freescale Semiconductor, Inc... NOTES: 1. CONTROLLING DIMENSION: MILLIMETER. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, 1982. 3. DIMENSION F TO CENTER LINE OF LEADS. 2X W K Q 0.2 (0.008) M T S M A M M N L H 5X D 0.51 (0.020) M T B M STYLE 1: PIN 1. 2. 3. 4. 5. CASE: T C 5X SEATING PLANE P 0.51 (0.020) M T B E MILLIMETERS MIN MAX 44.7 45.21 34.8 35.31 6.22 6.73 0.43 0.58 2.03 2.54 2.18 BSC 41.91 BSC 32.77 BSC 6.76 7.11 3.18 4.19 25.15 BSC 7.37 BSC 9.91 BSC 0.2 0.33 3 3.35 13.59 14.1 11.3 11.81 2.29 BSC INCHES MIN MAX 1.760 1.780 1.370 1.390 0.245 0.265 0.017 0.023 0.080 0.100 0.086 BSC 1.650 BSC 1.290 BSC 0.266 0.280 0.125 0.165 0.990 BSC 0.290 BSC 0.390 BSC 0.008 0.013 0.118 0.132 0.535 0.555 0.445 0.465 0.090 BSC RF INPUT VDD1 VDD2 VDD3 RF OUTPUT GROUND F M CASE 301AY--01 ISSUE O Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. E Motorola Inc. 2003 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1--800--521--6274 or 480--768--2130 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3--20--1, Minami--Azabu, Minato--ku, Tokyo 106--8573, Japan 81--3--3440--3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852--26668334 HOME PAGE: http://motorola.com/semiconductors MHL19926 2 MOTOROLA RF DEVICE DATA ◊For More Information On This Product, Go to: www.freescale.com MHL19926/D