Bluetooth/Wi-Fi Antenna Module APAMBJ-145 RoHS/RoHS II Compliant MSL level: Not Applicable Ø77.3 x 36.5 mm TYPICAL APPLICATIONS: FEATURES: • Passive, External Dual band WiFi / Bluetooth antennas Covering WIFI / BLUETOOTH (2.4 GHz) and WIFI (5.1 - 5.9 GHz) • Gain: 5 dBi max. at 2.4GHz; and 2dBi at 5.8GHz • VSWR: 2:1 • RoHS/RoHS II compliant • 2J Technology • Vehicle WiFi Routers • WiFi Terminals STANDARD SPECIFICATIONS: Parameters Receiving Frequency Min. Typ. 2.4 5.1 VSWR Polarization Model Impedance 5.9 2:1 Horizontal 50 Gain Operating Temperature Max. -40 5 2 +85 Units GHz GHz Ω dBi dBi ˚C Note Wifi / Bluetooth WiFi @ 2.4GHz @ 5.8 GHz MEASUREMENTS: Tested with 1m cable length on 30x30cm ground plane VSWR (Wi-Fi 2.4GHz) ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED VSWR (Wi-Fi 5.1-5.9GHz) LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 02.09.16 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Bluetooth/Wi-Fi Antenna Module APAMBJ-145 RoHS/RoHS II Compliant Ø77.3 x 36.5 mm OUTLINE DIMENSION: Parameters RF Connector Weight Cable Type Cable Length Lid Base Gasket Color SMA Male 220g RG174U 250cm ABS Zamak TPE Black Description PACKAGING: Each antenna is packed individually in a 140x120x81mm box. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 02.09.16 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Bluetooth/Wi-Fi Antenna Module APAMBJ-145 RoHS/RoHS II Compliant Ø77.3 x 36.5 mm CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applicaFor applications requiring tions or any application requiring high reliability where component failure could result in loss of life and/or property. high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 02.09.16 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale