MAXIM MAX-256-X

Description
The MXA-256-X detector is a hybrid
focal plane Indium Gallium Arsenide
PIN photodiode array with wavelength
response ranging from 800 nm to 1700
Multiplexed InGaAs PIN
Photodiode Array
MXA-256-X
800 - 1700 nm
nm. The array has 256 elements
IN A
NEW
LIGHT.
configured in a linear orientation with
standard pixel height of 0.5 mm. A
buffered multiplexer provides individual
CMOS amplifiers for each photodiode.
The integrating amplifier maintains zero
volt bias across each InGaAs
photodiode, minimizing dark current
and low frequency noise and allowing
for longer exposure times with
increased sensitivity. A static shift
register scanning circuit sequentially
selects sample-and-hold integrator
output voltages which are proportional
to input optical power. On-chip
Features
correlated double sampling removes
• 256 multiplexed elements
integrator offsets and further
• High resolution (50 micron pitch)
suppresses low frequency noise. The
• Exposure times 10 micro sec. - 10 sec.
array is available in a 28 pin dual-in-line
• Wide dynamic range (14-bit)
package. Included in the assembly are
• Correlated double sampling
a single-stage thermoelectric cooler,
• 800 - 1700 nm response
silicon multiplexer, bias resistor and
bypass capacitors.
EVERYTHING
Applications
• Fiber optics, WDM monitor
• NIR spectroscopy
• NIR imaging
• NIR astronomy
• Far-field analysis
MXA-256-X InGaAs
Array Array
MXA-256-X
InGaAs
PARAMETER
CONDITIONS
MXA-256-X
256
Number of elements
0.5 mm
Pixel height
0.05 mm
Pixel pitch
28 pin with 1-stageTE Cooler
Package
±5pA
"5pA
Dark Current
Response
Typical @1550 nm
65 mV/pJ (0.97A/W onto 15 pF)
Minimum@1550 nm
60 mV/pJ
800 to 1700 nm
Wavelength response
Response uniformity
±10%
"10%
@1550 nm
Grade A
2%
Grade
A==none;
none;Grade
GradeB B≤ "2%
Pixel dropouts
1.8fC
Noise equivalent charge
Full well capacity
100 KHz readout
15000ee- (150V
(150µVonto
onto15
15 pF)
pF)
15000
Read noise
NEP(pW/Hz
(pW/Hz)1/2)
@25˚C
NEP
@25
°C
Optical
range11
Optical Dynamic
Dynamic range
@
2525˚C
°C
Dark
voltage
Dark
voltage
raterate
25°C
@ 25˚C
Dark
voltage
Dark
voltage
raterate
5°C
@ 5˚C
t = 1 msec
0.15
t = 100 msec
0.025
Tint <10ms
Typical for
25˚C, Vn = 400µV
t# 10msec
-5˚C,
VN = 150µV
42 dB(>13
dB (>14 bits)
bits)
39
Typical pixel
0.6 V/sec
Maximum pixel
6.0 V/sec
Typical pixel
0.1 V/sec
Maximum pixel
1.0 V/sec
10 KHz to 500KHz
Pixel readout rate
TE cooler (One stage)
400M e- (4V onto 15 pF)
Hot side temperature
27°C
Tmax=64°C @ 1.8A,8V
T=45°C @ 0.85A, 5V(Nominal)
-40°C to 70°C
Storage
Case operating
temperature range
No cooler
With cooling
Note 1: Optical Dynamic Range defined as: 10Vmaxlog(-Vdark/Vnoise)
Vmax = 1.8 volts
Vref = 3.5 volt
0° to 40°C
-5°to 70°C
Typical Performance Specifications at 25o C
Standard Deviation of Dark Drift (V)
(N=9, Tint=100ms)
8.0E-4
6.0E-4
4.0E-4
2.0E-4
0.0E-4
1
17
33
49
65
81
97 113 129 145 161 177 193 209 225 241
Pixel Number
Responsivity
1.2
1
0.8
0.6
A/W
0.4
0.2
0
0.8
1.0
1.2
1.4
1.6
1.8
1E+0
1E+1
Wavelength (nm)
(µm)
1300 NEP(W/√Hz)
1E-12
1E-13
1E-14
1E-15
1E-4
1E-3
1E-2
1E-1
Exposure Time (sec)
Dark Current (pA)
4
2
0
-2
-4
0
80
160
Pixel Number
240
MXA-256-X
MXA-256-X Multiplexed Array Schematic Diagram
Note: Timing information as per PerkinElmer
Optoelectronics MB Series Multiplexers
Mechanical Specifications
PIN #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PIN OUT TABLE
FUNCTION
PIN #
φ SH2
28
N/C
27
T.E. COOLER (+)
26
N/C
25
EVEN φ ST
24
THERMISTOR
23
THERMISTOR
22
GND
21
EVEN φ 1D
20
φ
19
EVEN 2D
EVEN EOS
18
N/C
17
EVEN OUT 1
16
EVEN OUT 2
15
FUNCTION
φ SH1
RESET
T.E. COOLER (-)
ODD φ ST
MUX SENSE*
VDD
VSS
VREF
ODD φ 1D
ODD φ 2D
ODD EOS
N/C
ODD OUT 1
ODD OUT 2
* Internally connected to Vss with MB Series multiplexer
For more information e-mail us at [email protected] or visit our web site at www.perkinelmer.com/opto
All values are nominal; specifications subject to change without notice.
©2000 PerkinElmer, Inc.
All rights reserved.
0400
is a registered trademark of PerkinElmer, Inc.
PerkinElmer Optoelectronics
22001 Dumberry Road
Vaudreuil (QC) Canada
J7V 8P7
Phone: (450) 424-3300
Fax: (450) 424-3411