D A T A S H E E T CERLED Ceramic Chip SMD SMD Low Profile CR 60 R red Description The solder pads provide an excellent heat sink. For multi-colour displays just choose 2 or more CERLEDs and mount them side by side or even antiparallel. Ideal for back - light applications. Small true chip - LED to build custom configurations. Available on special order in 8 mm blister tape. The CR 60 R has a clear epoxy lens. ALL MEASUREMENTS IN MM www. optoel ectronics. per kinelmer . com Features and Benefits Solid state ceramic chip Surface mounting device High thermal conductivity Superior light uniformity End - to - end and side - to - side stackable down to a pitch of 1.3 mm DATASHEET Maximum Ratings at 25° C Power dissipation Derating linear Peak forward current Continuous forward current Junction temperature Storage temperature Operating temperature Soldering temperature Ptot 130 mW 2.4 mW / ° C IFSM (10 µs) IF Tj Tst Top Tsold (10 s) 500 mA 60 mA 120° C -20° C to 120° C -20° C to 80° C 240° C Adequate heat sink is required. Derating must be observed to maintain junction temperature below maximum. Please note our recommended solder profile at www.optoelectronics.perkinelmer.com. Optical and Electronic Characteristics at 25° C IF = 20 mA, ambient temperature = 25° C min Luminous intensity typ 100 Peak emission wavelength Spectral half bandwidth Forward voltage Reverse leakage @ 5 V Reverse voltage Light emission angle max 140 628 20 2.0 2.6 10 5 100° unit mcd nm nm V µA V Degree Note: according IEC 60825-1 (EN60825-1): LED Radiation class 1 Figure 1 0° 0° 60° 90° 1,0 30° 30° 30° 60° 60° 0,5 0,5 www. optoel ectronics. per kinelmer . com 90° 1,0 30° 90° 1,0 60° 0,5 0,5 90° 1,0 CERLED® 2 DATASHEET Figure 2 Suggested Mounting Method Figure 3 Special Packaging Standard 8 mm Blister Tape Cathode Anode Anode points to perforation Figure 4 Arrays: Available in strips up to 12 CERLEDs with a max. pitch tolerance in spacing and linearity of ± 0.01 mm between chip centers. Code to order strips: CR 60 r – XX (no. of LEDs) PerkinElmer Elcos GmbH European Customer Support for LED Solutions Luitpoldstrasse 6 85276 Pfaffenhofen, Germany Telephone: (+49)8441-8917-0 Fax: (+49)8441-71910 [email protected] European Headquarters Wenzel-Jaksch-Strasse 31 65199 Wiesbaden, Germany Telephone: (+49)611-492-247 Fax: (+49)611-492-170 [email protected] North America Customer Support Hub 22001 Dumberry Road Vaudreuil-Dorion, Québec Canada J7V 8P7 Telephone:(+1) 450-424-3300 (+1) 866-574-6786 (toll-free) Fax: (+1) 450-424-3345 [email protected] Asia Customer Service Hub 47 Ayer Rajah Crescent #06-12 Singapore 139947 Telephone: (+65)6775-2022 (+65)67704-366 Fax: (+65)6775-1008 [email protected] For a complete listing of our global offices, visit www.optoelectronics.perkinelmer.com ©2005 PerkinElmer, Inc. All rights reserved. The PerkinElmer logo and design are registered trademarks of PerkinElmer, Inc. CERLED® is a trademark of PerkinElmer, Inc. or its subsidiaries, in the United States and other countries. All other trademarks not owned by PerkinElmer, Inc. or its subsidiaries that are depicted herein are the property of their respective owners. PerkinElmer reserves the right to change this document at any time without notice and disclaims liability for editorial, pictorial or typographical errors. 600074_01 DTS1005 www. optoel ectronics. per kinelmer . com CERLED® 3