Imaging Telecom Fiber-Optic Receiver Modules 10 Gbps Series SRAP10 Fiber-Optic Receiver Modules Description The SRAP10 series incorporates a highspeed InGaAs photodiode with a lownoise GaAs HBT transimpedance amplifier in an 8 pin butterfly package for digital communication applications. The SRAP10 series conforms to Synchronous Optical Network (SONET) requirements for OC-192 (10 Gbps) receivers used in long-range, intermediate-range and short-range applications. Receiver modules are available in hermetically sealed fibered packages with single-mode fiber. Committed to supplying the highest quality products, PerkinElmer Optoelectronics is certified to meet ISO 9001. The SRAP10 series is designed to satisfy Telcordia quality specification GR-468-CORE. All devices undergo periodic process qualification programs to assure high reliability. Applications • Short, Intermediate and Long-haul receivers for SONET/SDH • DWDM systems • High-speed networks • Test equipment Features • • • • • • InGaAs PIN detector Low-noise GaAs HBT TIA 10 Gbps receiver (OC-192) Internally bevelled fiber for low return loss Fibered and connectorized modules Single polarity power supply www.perkinelmer.com/opto D A T A S H E E T Lighting SRAP10 Figure 1. Mechanical Dimensions PIN DESCRIPTION 1 +Vpd 2 Case GND 3 +Vdd 4 GND 5 GND 6 GND 7 GND 8 N/C K con. O/P Optical Fiber Pigtail Length (1000 ºmm MIN) Connector Unit: mm (nominal) 04.191 Specifications Test conditions: T=22° C, Vpd = 8 Volts, Vdd = 8 Volts, RL = 50 Ohms AC. Limits applicable at 22° C (case temperature). PARAMETER SRAP10 Units Min Typ Max Bandwidth (-3dB, 50 Ohms) 8 9 GHz Responsivity, single-ended (1300 - 1600 nm) 320 400 V/W Effective transimpedance 400 500 Ohms Sensitivity (BER=10-10) -18 -19 dBm Overload (BER=10-10) 0 1 dBm 3.0 Volts Output offset voltage Output return loss (S22), 100KHz-8 GHz 8 10 dB TIA supply current 100 120 mA TIA power dissipation 800 960 mW Optical return loss -27 dB Note: Consult PerkinElmer Optoelectronics for typical performance characteristics over the operating temperature range. 01-003:051201/2 www.perkinelmer.com/opto SRAP10 Figure 2. Typical Connection Circuitry Ordering Guide Maximum Ratings Generic Device Type: SRAP10-CC Supply voltage (Vdd) Detector voltage (Vpd) Optical power Fiber bend radius Operating case temp. Storage temperature 8.5 Volts 15 Volts 1.25 mW 30 mm min. 0/70° C -40/85° C Connector Type (CC): FC: FC connector SC: SC connector Fiber Type (core/cladding/buffer) (FF): 09: 9/125/900 µm PerkinElmer Optoelectronics reserves the right to change or amend specifications and/or configurations at any time without notice. Canada: USA: Europe: Asia: PerkinElmer Optoelectronics 22001 Dumberry Road Vaudreuil, Québec, J7V-8P7 Canada Phone: (450) 424-3300 Fax: (514) 693-2210 PerkinElmer Optoelectronics 44370 Christy Street Fremont, CA 94538-3180 Phone: (510) 979-6500 Fax: (510) 687-1152 PerkinElmer Optoelectronics GmbH Wenzel-Jaksch-Str.31 65199 Wiesbaden Phone: +49 611 492 534 Fax: +49 611 492 578 PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: 65 775 1008 © 2001 PerkinElmer Inc. All rights reserved. 01-003:051201/3 www.perkinelmer.com/opto