SMP550G-FL MECHANICAL DATA Dimensions in mm. P.I.N. PHOTODIODE FEATURES 3.8 ± 0.2 WINDOW Ø 5.9 ± 0.1 Ø 9.1 ± 0.2 Ø 8.1 ± 0.1 20 SENSITIVE SURFACE Ø 0.45 LEAD • • • • • • • • • • EYE RESPONSE DETECTION PHOTODIODE ISOLATED FROM PACKAGE EXCELLENT LINEARITY LOW NOISE WIDE SPECTRAL RESPONSE LOW LEAKAGE CURRENT LOW CAPACITANCE BG18 INTEGRAL OPTICAL FILTER TO39 HERMETIC METAL CAN PACKAGE EMI SCREENING MESH AVAILABLE 5.08 ± 0.2 3 2 DESCRIPTION 1 The SMP550G-FL is a Silicon P.I.N. photodiode incorporated in a hermetic metal can package. The electrical terminations are via two leads of diameter 0.018" on a pitch centre diameter of 0.2". The can structure incorporates an photoptic response optical filter with peak transmission at 510nm. The cathode of the photodiode is electrically isolated from the package, which has a separate earth pin. TO-39 Package Pin 1 – Anode Pin 2 – Cathode Pin 3 – Case The larger photodiode active area provides greater sensitivity than the SMP400 range of devices, with a corresponding reduction in speed. The photodiode structure has been optimised for high sensitivity, light measurement applications. The metal can and optional screening mesh ensure a rugged device with a high degree of immunity to radiated electrical interference. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) Operating temperature range Storage temperature range Temperature coefficient of responsively Temperature coefficient of dark current Reverse breakdown voltage Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. -40°C to +70°C -45°C to +80°C 0.35% per °C x2 per 8°C rise 60V Prelim. 1/98 SMP550G-FL CHARACTERISTICS (Tamb=25°C unless otherwise stated) Characteristic Test Conditions. λ at 900nm Responsiv ely Min. Typ. 0.45 0.55 A/W 5.19 mm2 Active Area Dark Current Breakdo wn Voltage Capacitance E = 0 Dar k 1V Reverse 2 4 E = 0 Dar k 10V Reverse 16 22 E = 0 Dar k 10µA Reverse E = 0 Dar k 0V Reverse 55 E = 0 Dar k 20V Reverse 10 60 V pF 9 50Ω NEP nA 80 30V Reverse Rise Time Max . Units ns 19x10-14 900nm 0.45 W/√Hz Directional characteristics Directional Characteristics 80° 1 1 Angle from sensor to illumination 70° 0.9 60° 0.8 0.8 Normalised Incident Power 50° 40° 0.6 30° 0.4 20° 0.7 0.6 0.5 0.4 0.3 0.2 0.2 10° 0.1 0 0 0 0.2 0.4 0.6 0.8 0 1 10 20 30 40 50 60 70 80 90 Angle from sensor to illumination Normalised incident power Spectral Response Relative Responsivity (%) 100 80 60 40 20 0 0 Semelab plc . 200 400 600 Wavelength (nm) 800 Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. 1000 1200 Prelim. 1/98