Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2220903054 Item: MK02/0-1C90-500W Magnetic properties Pull in Drop out Test equipment Conditions Min Typ Max Unit Max Unit at 20°C at 20°C SV 002 Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Conditions Min Typ Form C - Changeover not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ ! $ Sensor deactivated Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced blue Polyurethan Min Typ Max & & & Unit % % % Min Cable typ Cable material Cross section Typ Max Unit Max Unit round cable PVC 0,14 qmm Conditions General data Mounting advice Mounting advice Mounting advice tightening torque Min Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. ' ( " ) *( Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 03.01.08 Designed by: ALICHTENSTEIN Approval at: 23.04.08 Approval by: BUELTZHOEFFER Last Change at: 21.12.10 Last Change by: WKOVACS Approval at: 21.12.10 Approval by: KOLBRICH Version: 03