Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2242711024 Item: MK04-1A66B-200W Magnetic properties Pull in Test equipment Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit KMS-14+SA002+PK002 Conditions Min Typ Max Unit A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ ! $ Sensor deactivated Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced white Polyurethan Min Typ ' ' ' Max & & & Min Cable typ Cable material Cross section [mm²] Typ Unit % % % Max Unit Max Unit flat cable PVC 0,14 Conditions General data Mounting advice mounting advice 1 mounting advice 2 tightening torque ) " * +) Disk ISO 7089 Min Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron Magnetically conductive screws must not be used ( & Modifications in the sense of technical progress are reserved Designed at: 18.07.06 Designed by: ALICHTENSTEIN Approval at: Last Change at: 18.08.09 Last Change by: KSCHIELENSKI Approval at: 24.09.07 Approval by: Approval by: BUELTZHOEFFER Version: 03