12mm Rotary Encoder with LED Type DPL12 Series Type DPL12 Series Characteristics Electrical 12mm Rotary incremental encoder with LED for use in electronic equipment. Pulses: Contact Rating: Dielectric Strength: Insulation Resistance (min): Operating Speed (RPM): Switch Power Rating (where fitted): Switch Contact Resistance: Electrical Travel: Rotational Noise: Chattering: 24 0.5mA 5VDC 300VAC / 1mA, 1 minute 100M ohms at 250VAC 60 RPM 16VDC 3A 100m ohm Max Continuous t2 = 2.0 ms max (see below) t1 & t3 = 3.0 ms max (see below) Can be supplied with or without switch with customisation to standard options. Key Features ■ 12mm Rotary Encoder ■ Incremental Type ■ Push on Switch Option ■ Various Shaft Lengths ■ LED Colour Options ■ Detent Options Code Off area V = 3.5V or more. Code on area V=1.5V or less Switch – Dual colour – see below for characteristics No Switch Single colour– see below for characteristics Colour options No Switch – Red, Green, Blue Switch – 1: Blue/Green, 2: Blue/Orange, 3: Green/Red LED Characteristics Mechanical Total Mechanical Travel: Detents: Switch Operating Force: Switch Travel: Shaft Type: Shaft Length (from Mounting Surface): Continuous 0, 24 400+/- 200gf 0.5mm F – Flatted, K - Knurled See Chart below Characteristics Environmental Operating Temperature Rotational Life -40 - +85 degrees C 30,000 Cycles Output Signal Format Shaft Rotational Direction Signal Format A (Terminal A-C) Clockwise B (Terminal B-C) A (Terminal A-C) Anticlockwise B (Terminal B-C) Literature No. 1-1773449-0 Issued: 02-08 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com 12mm Rotary Encoder with LED Type DPL12 Series LED Characteristics Without Switch Reverse Current [IR] = 10uA Reverse Voltage 5V Operating Temperature -40 - +85 deg C Emitted Colour Power Dissipation DC Forward Current Blue Red Green 100mW 58mW 48mW 20mA 25mA 20mA Forward Voltage Typical Max. 3.2V 4.0V 1.8V 2.3V 2.0V 2.4V With Switch Reverse Current [IR] = 10uA Reverse Voltage 5V Operating Temperature -40 - +85 deg C Emitted Colour Power Dissipation DC Forward Current Peak Forward Current Red Orange Blue Green 170mW 75mW 105mW 105mW 30mA 30mA 30mA 25mA 185mA 195mA 150mA 130mA Forward Voltage Typical Max. 1.95V 2.5V 2.1V 2.5V 3.3V 4.0V 3.1V 3.8V Dimensions DPL12V Literature No. 1-1773449-0 Issued: 02-08 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com 12mm Rotary Encoder with LED Type DPL12 Series Dimensions DPL12SV Shaft Length Without Switch Type K Dim L (from mounting surface) L (from mounting surface) F F 17.5 5 Options (mm) 24 only 20 7 25 12 18.5 5 Options (mm) 25 only 21 7 26 12 Shaft Length With Switch Type K Dim L (from mounting surface) L (from mounting surface) F F LED Colour Codes Switch Option Code 1 2 3 R G B Switch (Dual Colour) No Switch (Single Colour) Description Blue / Green Blue / Orange Green / Red Red Green Blue How to Order DPL12 V N 24 Common Part Orientation Detent Pulses DPL12 – no switch A Bush Details Shaft Length N - None V - Vertical DPL12S – with Switch Literature No. 1-1773449-0 Issued: 02-08 24 – 24 Clicks Dimensions are shown for reference purposes only. 24 – 24 Pulses 20 A – 5mm Dimensions are in millimetres unless otherwise specified. F R Shaft Style LED Colour F - Flatted See Relevant Table See Relevant Table Specifications subject to change. K - Knurled tycoelectronics.com passives.tycoelectronics.com