PANJIT SK23-AU

SK22-AU~SK26-AU
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE
20 to 60 Volts
CURRENT
2 Amperes
0.083(2.11)
0.075(1.91)
0.155(3.94)
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Metal to silicon rectifier. majority carrier conduction
• Low power loss, high efficiency
• High surge capacity
• For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications
• Acqire quality system certificate : TS16949
• AEC-Q101 qualified
• Lead free in comply with EU RoHS 2002/95/EC directives
0.130(3.30)
FEATURES
0.185(4.70)
0.160(4.06)
0.083(2.13)
0.096(2.44)
0.012(0.305)
0.006(0.152)
0.050(1.27)
0.030(0.76)
0.220(5.59)
0.200(5.08)
MECHANICAL DATA
•
•
•
•
•
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes cathode end
Standard packaging: 12mm tape (EIA-481)
Weight: 0.0032 ounce, 0.092 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
PARAMETER
SYMBOL
SK22-AU
SK23-AU
SK24-AU
SK25-AU
SK26-AU
UNITS
Maximum Recurrent Peak Reverse Voltage
V RRM
20
30
40
50
60
V
Maximum RMS Voltage
V RMS
14
21
28
35
42
V
Maximum DC Blocking Voltage
V DC
20
30
40
50
60
V
Maximum Average Forward Current
IF(AV)
2
A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
50
A
Maximum Forward Voltage at 2A ( Note 1)
VF
0.5
0.7
V
Maximum DC Reverse Current TJ=25OC
at Rated DC Blocking Voltage TJ=100OC
IR
0.2
20
0.1
20
mA
Typical Thermal Resistance ( Note 2)
Operating Junction Temperature Range
Storage Temperature Range
RθJL
TJ
TSTG
12
-55 to +125
C/W
O
-55 to +150
-55 to +150
C
O
C
O
NOTES:
1. Pulse Test with PW =300µsec, 1% Duty Cycle.
2. Mounted on P.C. Board with 8mm 2 (.013mm thick) copper pad areas.
STAD-MAR.13.2009
1
PAGE . 1
SK22-AU~SK26-AU
2.5
=20-30V
=40-60V
2.0
1.5
1.0
.375" 9.5mmLEADLENGHTS
RESISTIVEORINDUCTIVELOAD
0.5
0
0
20
40
60
80
100
120
140
160
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT AMPERES
RATING AND CHARACTERISTIC CURVES
60
50
40
30
20
10
0
1
10
O
LEAD TEMPERATURE, C
Fig.1- FORWARD CURRENT DERATING CURVE
Fig.2- MAXIMUM NON-REPETITIVEPEAKFORWARD
SURGE CURRENT
10
4
10
3
10
2
10
1
10
0
FORWARD CURRENT , AMPERES
REVERSE CURRENT , m A
10 5
10
O
T J =125 C
O
T J =75 C
10
-1
10
-2
O
T J =25 C
20-40V
50-60V
1.0
0.1
O
T A = 25 C
0.01
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE ,%
Fig.3-TYPICAL REVERSE CHARACTERISTIC
STAD-MAR.13.2009
1
100
NO. OF CYCLE AT 60Hz
0
0.2
0.4
0.6
0.8
1.0
FORWARD VOLTAGE , VOLTS
Fig.4-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTIC
PAGE . 2
SK22-AU~SK26-AU
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5Kper 7” plastic Reel
STAD-MAR.13.2009
1
PAGE . 3
SK22-AU~SK26-AU
Part No_packing code_Version
SK22-AU_R1_000A1
SK22-AU_R1_100A1
SK22-AU_R2_000A1
SK22-AU_R2_100A1
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Part No.
Packing size code means 13"
Packing type means T/R
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
STAD-MAR.13.2009
1
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 4
SK22-AU~SK26-AU
Disclaimer
z
Reproducing and modifying information of the document is prohibited without
permission from Panjit International Inc..
z
Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
z
Panjit International Inc. disclaims any and all liability arising out of the application or
use of any product including damages incidentally and consequentially occurred.
z
Panjit International Inc. does not assume any and all implied warranties, including
warranties of fitness for particular purpose, non-infringement and merchantability.
z
Applications shown on the herein document are examples of standard use and
operation. Customers are responsible in comprehending the suitable use in particular
applications. Panjit International Inc. makes no representation or warranty that such
applications will be suitable for the specified use without further testing or modification.
z
The products shown herein are not designed and authorized for equipments requiring
high level of reliability or relating to human life and for any applications concerning
life-saving or life-sustaining, such as medical instruments, transportation equipment,
aerospace machinery et cetera. Customers using or selling these products for use in
such applications do so at their own risk and agree to fully indemnify Panjit
International Inc. for any damages resulting from such improper use or sale.
STAD-MAR.13.2009
1
PAGE . 5