RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Features • • • • • • • • • • • • MASWSS0201 V1 Functional Schematic Ideal for CATV, DTV, DVR, STB Applications Default-On in Unpowered State (RFC-RF1 Path) Broadband Performance: DC-2.5 GHz Low Insertion Loss: 1.1 dB at 1 GHz High Isolation: > 60dB @ 100MHz Single Control Operation Power Handling: > 20 dBm P1dB Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Configurable for Non-terminated Operation Description M/A-COM’s MASWSS0201 is a broadband GaAs PHEMT MMIC SPDT terminated switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASWSS0201 is ideally suited for applications where an unpowered on state is critical in a single control line SPDT terminated switch. The unpowered condition is the same as the VC = 0 condition. This part can also be configured as a reflective switch with minimal impact to the RF performance. Pin Configuration 2 Pin No. The MASWSS0201 delivers high isolation, low insertion loss and high linearity up to 2.5 GHz. The MASWSS0201 is fabricated using a 0.5 micron gate length GaAs E/D PHEMT process. The process features full passivation for performance and reliability. Ordering Information 1 Part Number Package MASWSS0201TR-3000 3000 piece reel MASWSS0201SMB Sample Test Board (Includes 5 Samples) Pin Name Description 1 N/C No Connection 2 RF1 3 Term 1 GND Termination 1 Ground 4 GND Ground 5 N/C No Connection 6 GND Ground 7 Term 2 GND3 Termination 2 Ground 8 RF2 RF Port 2 9 VC Control 10 GND Ground 11 RFC RF Input 12 GND 13 1. Reference Application Note M513 for reel size information. RF Port 1 3 Paddle Ground 4 RF and DC Ground 2. M/A-COM recommends that all unused (N/C) pins be connected to ground. All data on this datasheet was taken with N/C pins connected to ground. 3. Terminated grounds require DC blocking capacitors; see application schematic. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz MASWSS0201 V1 Electrical Specifications: TA = 25°C, Z0 = 75 Ω, VC = 0 V/3 V, PIN = 0 dBm 5 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss RFC to RF1 (VC = 0V) 100 MHz 1.0 GHz 2.0 GHz dB dB dB — — — 0.9 1.0 1.3 1.75 1.85 — Insertion Loss RFC to RF2 (VC = 3V) 100 MHz 1.0 GHz 2.0 GHz dB dB dB — — — 1.0 1.2 1.5 1.65 1.85 — Isolation 100 MHz 1.0 GHz 2.0 GHz (RFC - RF1) 2.0 GHz (RFC - RF2) dB dB dB dB 60 40 — — 65 45 38 43 — — — — Return Loss DC - 2.0 GHz dB — 25 — IIP2 (VC = 0V / 3V / 5V) Two Tone, +5 dBm/Tone, 10 MHz Spacing 100 MHz 1.0 GHz dBm dBm — — 54 / 51 / 53 72 / 70 / 70 — — IIP3 (VC = 0V / 3V / 5V) Two Tone, +5 dBm/Tone, 10 MHz Spacing 100 MHz 1.0 GHz dBm dBm — — 38 / 38 / 39 41 / 44 / 44 — — Input P1dB (VC = 0V / 3V / 5V) 100 MHz 1.0 GHz dBm dBm — — 21 / 21 / 22 29 / 28 / 29 — — T-rise T-fall 10% to 90% RF 90% to 10% RF µS nS — — 1.4 12 — — Ton Toff 50% control to 90% RF 50% control to 10% RF µS nS — — 1.6 12 — — Transients — mV — 550 — Control Current VC = 3V µA — 250 500 5. Electrical specifications apply to terminated configuration only. Truth Table 8,9,10 Absolute Maximum Ratings 6,7 Parameter Absolute Maximum Input Power @ 100 MHz RFC-RF1 RFC-RF2 +22 dBm Control VC Input Power @ 1 GHz +29 dBm 0 On Off Operating Voltage +8.5 volts 1 Off On ° ° Operating Temperature -40 C to +85 C Storage Temperature -65°C to +150°C 8. External DC blocking capacitors are required on all RF ports. 9. 0 = 0 ± 0.1 V, 1 = +2.9 V to +5 V. 10. The unpowered on state is the same as VC=0. 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz MASWSS0201 V1 Typical Performance Curves: TA = 25°C, Z0 = 75 Ω, Components per Application Schematic Insertion Loss RFC Return Loss 0.0 0 RFC to RF1 (Vc=0V) RFC to RF1 (Vc=0V) -0.5 RFC to RF2 (Vc=3V) RFC to RF2 (Vc=3V) -10 -1.0 -20 -1.5 -30 -2.0 -40 -2.5 -50 -3.0 0.0 0.5 1.0 1.5 2.0 2.5 0.0 3.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) RF1 Return Loss Isolation (Below 200 MHz) -40 0 RF1 to RFC (Vc=0V) RFC to RF1 (Vc=3V) -50 RF1 Terminated (Vc=3V) -10 RFC to RF2 (Vc=0V) -60 -20 -70 -30 -80 -40 -50 -90 25 50 75 100 125 150 175 200 225 0.0 250 0.5 1.0 1.5 2.0 2.5 3.0 2.5 3.0 Frequency (GHz) Frequency (MHz) Isolation (Above 200 MHz) RF2 Return Loss 0 -20 RF2 to RFC (Vc=3V) RFC to RF1 (Vc=3V) -30 -40 -20 -50 -30 -60 -40 -70 0.0 RF2 Terminated (Vc=0V) -10 RFC to RF2 (Vc=0V) -50 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz MASWSS0201 V1 Lead-Free 3 mm 12-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Application Schematic 11,12 C1-C5=10000 pf C6=100 pf Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 11. Non-connected pins (P1 and P5) are shown connected to ground as recommended. All data on this datasheet was taken with N/C pins connected to ground. 12. Application schematic shown is for terminated configuration. For non-terminated operation Term 1 and Term 2 ground pins are left open. See application section for data in unterminated configuration. M/A-COM’s AN3007 Application Note outlines a method for ESD sensitivity mitigation. It can be found at the Tech/Apps section of the MACOM.COM website. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz MASWSS0201 V1 Application Section Typical Performance Curves: TA = 25°C, Z0 = 75 Ω, Unterminated Configuration (Term 1&2 GND pins open) RFC Return Loss Insertion Loss 0.0 0 RFC to RF1 (Vc=0V) RFC to RF1 (Vc=0V) -0.5 RFC to RF2 (Vc=3V) RFC to RF2 (Vc=3V) -10 -1.0 -20 -1.5 -30 -2.0 -40 -2.5 -50 -3.0 0.0 0.5 1.0 1.5 2.0 2.5 0.0 3.0 0.5 1.0 1.5 2.0 2.5 3.0 2.5 3.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation (Below 200 MHz) RF1 Return Loss -40 0 RFC to RF1 (Vc=3V) -50 RFC to RF2 (Vc=0V) -10 RF1 to RFC (Vc=0V) RF1 Unterminated (Vc=3V) -60 -20 -70 -30 -80 -40 -50 -90 25 50 75 100 125 150 175 200 225 0.0 250 0.5 1.0 1.5 2.0 Frequency (GHz) Frequency (MHz) RF2 Return Loss Isolation (Above 200 MHz) -20 0 RFC to RF1 (Vc=3V) -30 RF2 to RFC (Vc=3V) -10 RFC to RF2 (Vc=0V) RF2 Unterminated (Vc=0V) -40 -20 -50 -30 -60 -40 -70 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz MASWSS0201 V1 Application Section Application Schematic – Unterminated Configuration C1-C3 = 10000 pf C4 = 100 pf 6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.