RoHS Compliant GaAs SPDT Terminated Switch DC - 2.5 GHz Features • • • • • • • • • • MASWSS0180 V1 Functional Schematic Very Low Power Consumption High Isolation: 30 dB up to 2 GHz Very High Intercept Point: 46 dBm IP3 Nanosecond Switching Speed Temperature Range: -40°C to +85°C Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW-338 Pin 1 V2 RF2 RFC GND V1 GND GND RF1 Description M/A-COM’s MASWSS0180 is a GaAs MMIC SPDT terminated switch in a lead-free SOIC 8-lead surface mount plastic package. The MASWSS0180 is ideally suited for use where very low power consumption is required. Pin Configuration Pin No. Function Pin No. Function 1 V2 5 RF Port 1 2 RF Common 6 Ground 3 V1 7 Ground 4 Ground 8 RF Port 2 Typical applications include transmit/receive switching, switch matrices, and filter banks in systems such as radio and cellular equipment, PCM, GPS, fiber optic modules, and other battery powered radio equipment. The MASWSS0180 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Absolute Maximum Ratings 1,2 Ordering Information Part Number Package MASWSS0180 Bulk Packaging MASWSS0180TR 1000 piece reel MASWSS0180SMB Sample Test Board Parameter Absolute Maximum Input Power 0.05 GHz 0.5 - 2.0 GHz +27 dBm +34 dBm Control Voltage -8.5 V < Vc < + 5 V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Terminated Switch DC - 2.5 GHz MASWSS0180 V1 Electrical Specifications: TA = 25°C, Vc = 0 V / -2.9 V, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. 3 Max. Insertion Loss DC - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB dB dB — — — 0.55 0.60 0.65 — 0.7 — Isolation DC - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB dB dB — 36 — 50 43 35 — — — VSWR On/Off DC - 2.0 GHz Ratio — 1.1:1 — Trise, Tfall 10% to 90% RF, 90% to 10 % RF nS — 10 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS — 20 — Transients In-Band mV — 25 — 1 dB Compression Point Input Power 0.05 GHz 0.5 - 2.0 GHz dBm dBm — — 25 30 — — Measured Relative to Input Power (for two-tone input power up to +5 dBm) 0.05 GHz 0.5 - 2.0 GHz dBm dBm — — 60 65 — — Measured Relative to Input Power (for two-tone input power up to +5 dBm) 0.05 GHz 0.5 - 2.0 GHz dBm dBm — — 40 46 — — Vc = 2.9 V µA — 15 35 2nd Order Intercept 3rd Order Intercept Control Current 3. Typical values represent performance at middle of frequency range noted. Truth Table 4 Control Inputs Handling Procedures Condition of Switch RF Common to Each RF Port V1 V2 RFC-RF1 RFC-RF2 1 0 ON OFF 0 1 OFF ON 4. 0 = 0 V ± 0.2 V, 1 = -2.9 V to -5.0 V 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Terminated Switch DC - 2.5 GHz MASWSS0180 V1 Lead-Free SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. Typical Performance Curves Isolation Insertion Loss +85C +25C -40C 100 0.8 80 Isolation (dB) Insertion Loss (dB) +25C 1.0 0.6 0.4 0.2 +85C -40C 60 40 20 0.0 0 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) VSWR vs. Frequency +25C +85C -40C 1.5 VSWR 1.4 1.3 1.2 1.1 1.0 0.0 3 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.