DESCRIPTION C REVISED PER ECR-ER18920 BY APPD DATE CTC 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT, FERRULE: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER REV CY 11/11/09 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) ALL OTHER METAL PARTS: .000050MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) 4. CONTACT AND FERRULE SHIPPED LOOSE 5. FOR USE WITH TACHII CABLE TCX-3CFWS OR EQUIVALENT. 6. FOR CRIMPING USE KINGS TOOL KTH-5000 AND DIE KTH-5006( .248 HEX, .054 SQUARE FLAT) 7. ASSEMBLE TO CABLE USING CAP-E01. MARKING: KINGS+2065+CABLE CODE+ DATE CODE+LACATION CODE 8. THESE AREA HAVE WHITE MARKING. 9. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS. FREQUENCY RANGE: DC-3GHz. RETURN LOSS: 26dB MIN AT DC-3GHz. .290 7.37 .198 5.03 .250 6.35 .591 15.01 .127 3.23 SEE NOTE 8 1.372[34.85] WHEN ASSEMBLED .748 19.00 .354 8.99 .138 3.51 CATALOG P/N: 2065-E00-3CW01N PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 RECOMMENDED CABLE TRIM DIMENSIONS WincheserElecronics ® CUSTOMER DRAWING DRAWN KEV APPROVED DCam DATE APPROVED 03/20/08 RFA DATE APPROVED 03/21/08 WPM DATE 03/21/08 DATE 03/21/08 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 BNC 75 OHM PLUG FOR TACHII TCX-3CFWS CABLE (ROHS COMPLIANT) A SD2065-E00-3CW01 SHT 1 OF 1 REV C